본 연구는 노동시장의 성별직종분리(occupational sex segregation)를 초래하는 요인들을 대분류 및 세분류 사업체를 단위로 규명하고자 하였다. 분석결과를 요약하면, 첫째, 사업체 성별직종분리에 영향을 미치는 요인 중 가장 중요한 것은 직급근로자 비율, 숙련기술자 비율, 그리고 사업체의 조직화 정도로 구성되어 있는 내부노동시작 특성으로 나타났다. 둘째, 사업체는 산업의 성별직종분리에 의해 영향을 받는 것으로 밝혀져 산업 전반에서 남성과 여성의 직종을 구분해 온 관행이 개별 사업체의 성별분리구조를 형성하고 고착화시키는 역할을 하는 것으로 보인다. 세째, 가정한 바와는 달리, 여성의 개인적인 자질향상이 성별직종분리의 개선과 직결되지는 않을 것으로 보인다. 그러나 평균 근속년수비는 성별직종분리를 감소시키는 것으로 나타나 여성이 노동시장에 지속적으로 참여하는 것이 성별직종분리를 개선할 수 있음을 시사한다. 네째, 사업체 성별직종분리 현상에 대한 내부노동시장 특성들의 높은 설명력과 여성의 경쟁력이 보여준 극히 미미한 설명력은 앞으로 산업구조 및 노동력의 유연화 추세에 직면하여 성별직종분리 구조의 개선 가능성에 대해 상반된 기대를 갖게 만든다.
Pretensioned spun high strength concrete (PHC) pile has to be quality-controlled and provided an adequate concrete cover to assure high load carrying capacity, impact resistance, economy, and durability. During spun pre-casting, the pile section is divided into several segregated layers such as laitance, paste, mortar, and concrete layers. Greater the thickness of segregated layers, more difficult it is to guarantee the capacity and the durability of PHC pile. The experimental study was performed to investigate the effects of centrifugal condition on the segregated layers of materials and the compressive strength of concrete for PHC pile. The considering factors in the test were centrifugal time and magnitude of centrifugal force. These factors have been found to have greater influence on the segregation than the concrete strength. The moderate centrifugal condition has to be considered to maintain quality assurance in the production of PHC pile, especially to provide the adequate concrete cover over its tendons.
국내분리 소 로타바이러스의 genomic RNA 형태, 분리주간의 교차면역반응 그리고 단클론 항체를 이용한 중화시험에 의해 혈청형을 조사한 바 다음과 같은 결과를 얻었다. 국내분리주들의 genomic RNA 형태는 크게 NCDV 형태(7/11 시료)와 non-NCDV 형태(4/11 시료)의 두가지로 나타났다. 교차면역시험에서 표준주인 NCDV주에 대한 양성혈청은 국내분리주들에 대해서는 비교적 낮은 중화력을 나타내었으나 국내분리주에 대한 양성혈청들은 타 국내분리주 뿐만 아니라 NCDV주에 대해 서로 높은 중화력을 나타내었는데, 분리주 중 678, P44, M4에 대한 양성혈청은 NCDV를 포함한 대부분의 분리주에 대해 100%의 중화력을 나타내었다. 또한 288주에 대한 양성혈청은 288, 678,P44, M4주에 대해서는 높은 중화력을 나타내었으나 다른 분리주들에 대해서는 비교적 낮은 중화력을 나타내었다. 국내분리주의 단크론 항체를 이용한 G혈청형 감별결과는 G6유사형이 45.8%(11/24주), G10 유사형이 54.2%(13/24주)로서 두가지 G형이 존재하였다. 한편 G6형에 반응한 것들의 P형은 표준주인 NCDV주(P1)와는 다른 것으로 확인되었으며, G10 유사형에 속하는 14주는 모두 P11 혈청형으로 판명되었다.
Supercritical carbon dioxide (SCO2) extraction was applied for the defatting of mealworm to prepare defatted powder (DP) and protein isolate (PI) and compare the process to press and hexane extraction, with respect to DP and PI physicochemical properties. SCO2 DP was obtained by extracting 34.40% oil at 41.37 MPa, 40℃ for 180 min, and the product contained 71.66% crude protein, which is similar to that of hexane DP and higher than that of press DP. In using alkali protein extraction to prepare PI from DP, SCO2 was as effective as hexane and better than press. SCO2 produced brighter DP and PI than press, but not as much as hexane. Protein solubility was similar in all DP, with minimum values at pH 5. The highest water adsorption capacity was noticeable for SCO2 PI, and SCO2 DP showed an oil adsorption capacity comparable to that of hexane DP. SCO2 DP and PI had better foaming capacity than press DP and PI and showed superior emulsion activity compared to others.
Proceedings of the Korean Society of Broadcast Engineers Conference
/
2011.07a
/
pp.6-7
/
2011
본 논문에서는 지역적 학습 방법을 활용하는 Average Neighborhood Margin Maximization(ANMM)에 기반하여 피부색과 비피부색 영역을 분리하는 이진 분류의 통계적 접근법을 제안한다. Fisher Linear Discriminant(FLD)와 Average Neighborhood Margin Maximization(ANMM)의 피부색과 비피부색 클래스 내 분산 대비 클래스 간 분산의 비교를 통해 두 클래스 간 분리력 변화를 확인한다. 교사(Supervised) 이진 분류문제에 대하여 Small sample size(SSS) 문제, 가우시안 분포 가정의 문제, 최대 추출 가능 특징 수 제한 문제 등을 해결함과 동시에, 지역적 특성 학습 방법의 도입을 통해 피부색과 비피부색 간 분리력을 향상시킨다.
스냅핏은 일종의 결속장치로서 흔히 플라스틱 부품들을 서로 체결하는데 이용되는데, 다른 결속장치에 비해 간편하고 생산품의 조립단가를 줄일 수 있고, 또한 분리력은 큰 반면에 결합력은 작게 만들 수 있는 장점을 가지고 있어 널리 사용된다. 스냅핏의 설계는 재료에 따른 물성(property) 및 구조적 강성(stiffness)이 설계 초기단계에서 고려되어야 하고, 또한 사출성형공정에서 스냅핏의 성형성도 예측되어야 한다. 그러나 스냅핏의 형상, 치수, 위치 등을 적절히 설계합성(synthesis)하고 적절한 재료를 선택하는 작업은 공정에 관한 종합적인 지식을 지원해 주는 합리적인 설계도구가 제공되지 못했던 이유로 사출 전문가의 오랜 기간 축적된 경험과 지식에만 전적으로 의존하여 왔다. 본 연구에서는 기존의 전문가에 의존해온 스냅핏 설계방법을 개선하기 위해 사출성형에 의해 제한되어지는 지식을 규칙베이스화하고 재료의 물성과 스냅핏의 형상 및 치수에 파라 스냅핏이 갖는 결합력, 분리력, 변형하중 및 허용언더컷 등을 출력하는 지적 설계 프로그램을 제안하였다.
An experimental study that included detailed observation of four 305-mm-diameter drilled shafts, one reference shaft of standard design and three test shafts with isolation tubes to mitigate skin friction in the vadose zone of a clay soil profile, is described. The shafts were loaded only by naturally expanding and contraction soil over a period of 17 months. The soil at the test site was instrumented to track suction and elevation changes. Maximum ground surface movements exceeding 40 mm were observed. Heave movements of less than 1.5 mm were observed in the test shafts with isolation tubes, while movements of 5 mm were observed in the reference shaft. Unit side shear loads in the shafts protected by the isolation tubes were minimal compared to those measured in the reference shaft. This indicates that the isolation tubes were very effective.
Attempts were made to investigate the conditions of mycelia of one low-temperature type strain and one high-temperature type strain of shiitake showing poor fruit-body formation in bed-log, and to survey harmful microorganisms formed on the log surface in Gapyung County, Korea. When tested the growing ability of mycelia, the low-temperature type strain showed ca. 1.1% decrease compared with preserved original strain. And, the high-temperature type one showed ca. 8.0% decrease. The growth of isolated mycelia was tested in sawdust medium. The high-temperature type strain showed ca. 10.8% decrease compared with original strain, and the low-temperature type one showed ca. 25.1% decrease. Weight reduction rate was investigated. The high-temperature strain showed ca. 20.1% decrease and the low-temperature one ca. 19.0%. When compared with non-treatment, original high-temperature type strain showed 107.0% decrease, the isolated high-temperature type strain 49.5%, original low-temperature type one 85.4%, isolated low-temperature type one 50.0%. As the results of confrontation culture, the high-temperature type strain and the low-temperature type one were same as the original ones, respectively. And, in the bed-logs, Hypoxylon truncatum, Coriolus versicolor, Inonotus xeranticus, Daedaleopsis tricolor, Graphostroma platystoma, two species of Myxomycetes, Trichoderma sp. Hypoxylon fragiforme, H. howeianum, and Nitschkia confertula were observed as harmful microorganisms, and the bed-logs were not in good condition.
Physical properties and compositions of dietary fiber sources (DFS) from peels of Asian pear fruit, Hosui, Niitaka and Chuwhangbae, were examined at different growth stages, young, unripe, and ripe fruits, to investigate their use as functional ingredients. Total dietary fiber (TDF) contents of DFS prepared from peels of three cultivars at three stages were high, 74.00-88.38%, with most being insoluble dietary fiber. Total phenolic compound contents of DFS were 1.64-4.46mg/g, with those of Niitaka and Chuwhangbae increasing with growth stages. Density of DFS from young fruit was significantly lower than those from unripe and ripe fruits (p<0.05), because particle size of DFS increased with growth stages within cultivars. Water-holding capacity (WHC) and oil absorption were 3.11-6.03g water/g solid and 1.98-2.57g oil/g sample, respectively. Young fruits, which showed lowest WHC value, had highest oil absorption value. Particle size of DFS had significant correlation with density, WHC, and oil absorption (p<0.05). Physical properties of DFS were mainly influenced by cellulose and uronic acid.
Proceedings of the Korean Society of Precision Engineering Conference
/
2003.10a
/
pp.81-81
/
2003
최근 유한요소법을 이용하여 절삭가공을 해석하는 연구가 많이 발표되고 있다. 이 때 가장 문제되는 점이 피삭재에서 칩으로 분리하는 조건이다. 일반적으로 칩 분리 조건이라 일컬어지는 이 조건을 어떻게 설정할 것인가에 대해 현재까지도 많은 연구가 이루어지고 있다. 현재까지 제시된 칩 분리 판별 조건은 두 가지 유형 - 기하학적, 물리적으로 나눌 수 있다. 기하학적 칩 분리 조건은 공구 끝단과 바로 앞 요소의 거리를 기준으로 정해진 특정한 값에 도달하면 요소가 분리되는 혹은 없어지는 방법을 이용하는 것이며(Fig. 1 참조), 물리적 칩 분리 조건은 요소 내의 소성변형률 혹은 변형률 에너지 밀도함수 등의 값을 기준으로 분리시키는 방법이다. 본 연구에서는 상용 유한요소 해석 프로그램인 ANSYS를 이용하였으며 이 프로그램에서 제공하는 element birth/kill 기법을 이용하여 기하학적 판별조건에 도달하면 공구 끝단 앞의 요소가 사라지는 방법을 취하였다. Fig. 2는 절삭가공을 위한 유한요소 모델링을 나타낸다. 칩-공구 접촉 부위에 접촉요소를 사용하였으며, 피삭재의 왼쪽과 아래쪽 부위는 각각 변위구속을 하였다. 공구의 이동은 변위경계조건의 값을 변화시킴으로써 구현하였다. 절삭력을 비교함으로써 해석결과의 타당성을 검토하였으며, 피삭재 내의 응력, 변형률 분포 등을 살펴보았다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.