• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1993.10b
• /
• pp.11-30
• /
• 1993

종래부터 CATV 또는 MATV시스템의 신호분기회로로 사용되어 오고 있는 Tap-off는 단지 실험적 경험적으로 제작되어 왔으며 이론적인 해석이나 엄밀한 설계법이 확립되어있지 않았기 때문에 그 성능에 있어서도 대역폭이 좁거나 분기 특성이 나쁜문제점등이 있었다 따라서 본 논문에서는 보조변성기가 부가된 변형된 약결합성 신호분기기를 제안하여 설계의 자유도를 높힘으로써 상당히 조밀한 결합간격의 회로구성이 가능한 설계법을 제안하고 그 주파수특성을 계산하여 제안한 변형된 신호분기기의 설계법의 유효함을 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.3
• /
• pp.399-409
• /
• 1998

In this paper, the broad-band design theory for weakly-coupled Tap-Off for CATV systems has been described and the transmission line impedance matching method has been proposed. The fabricated weakly-coupled Tap-Offs based on the above theory and method have been much improved in the frequency characteristics compared with conventional ones. Thus, the useful bandwidth of weakly-coupled Tap-Offs have been extended from 5 to 2000 MHz. It is also recognized that turn numbers of the coils composing the transformer are not integers but 0.9, 1, 1.9, 2, 2.9, etc., in the actual circuits. Further, the practical measurements of the frequency characteristics for a fabricated weakly-coupled Tap-Off show very good agreements with theoretical results, and hence, the validity of the proposed design theory and transmission line impedance matching method have been confirmed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1286-1290
• /
• 2006

방수로는 홍수 피해 경감을 사용되는 구조적 대책으로 최근 국내에서 널리 계획되고 있다. 이러한 방수로는 대체로 보통 횡월류위어 등으로 대표되는 유입부 구조물을 통하여 본류에 연결되지만, 평상시에도 본류의 유량을 일부 분담하는 형태로 설계되는 젖은 하도(wet channel) 형태의 방수로는 별도의 유입부 구조물을 설치하지 않고 바로 본류에 연결되는 것이 일반적인 형태이다. 일반적으로 유입부 구조물을 통해 연결되는 방수로의 특성은 유입부 구조물의 수리학적인 특성에 의해서 많이 좌우된다. 이에 반해 젖은 하도 형태의 방수로는 방수로의 폭(W), 방수로 유입되는 흐름의 유입각$(\theta)$등에 의해서 많이 좌우되며, 만약 설계된 방수로의 횡단면 형상이 사다리꼴 또는 직사각형 단면을 따른다면 이러한 흐름은 '제한된 영위어고 횡월류위어 흐름(restricted zero-height side weir flow)'으로 분류할 수 있다. 이러한 조건에서의 흐름은 일반적인 횡월류위어에서의 흐름과 상당히 다른 것으로 알려져 있다. 본 연구에서는 이러한 방수로 분기 조건을 다양하게 구현할 수 있는 실험 수로를 설치하여 방수로 폭을 변화시키면서 실험을 수행하였으며, 분기 조건의 변화에 따른 분수로 유입부분에서의 수리학적특성을 분석하였다.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.250-252
• /
• 2005

철차륜방식의 궤도시스템과 마찬가지로 자기부상차량 시스템 역시 정해진 경로로 주행하기 위한 분기장치가 반드시 필요하고, 대차가 궤도를 감싸고 주행하는 외형적 특성으로 분기장치의 구조가 커지고 동작이 복잡해지는 특징을 가지고 있다. 본 논문은 도시형 자기부상차량 시스템에 적용가능한 분기장치 형태들을 제안하고 있으며, 한국기계연구원의 도시형 자기부상차량 시험선로에 설치된 평행이동식 분기장치에 대한 설치 사양 및 운용현황 등을 설명하고 현재 개발이 진행중인 고속동작용 다관절 굴절식 분기장치의 1/5 scale 축소모형에 대한 개발현황 및 full scale 굴절식 분기장치로 확장할 때의 적용성 등을 제안하고 있다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.4
• /
• pp.273-278
• /
• 2016

In this paper, chaotic circuit of the Lorentz system using multipliers, operational amplifiers, capacitor, fixed resistor and variable resistor for control has been designed in a electronic circuit. Through PSPICE program, electrical characteristics such as time waveforms, frequency spectra and phase attractors analyzed. And in the special area ($10{\sim}100k{\Omega}$) of the $500k{\Omega}$ control variable resistor, the circuit showed chaotic dynamics. Also, we implemented the circuit in a electronic hardware system with discrete elements. Measured results of the circuit coincided with simulated data.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.491-499
• /
• 2017

Railway turnout systems are one of the most important systems in a railway and abnormal turnout systems can cause serious accidents. To detect an abnormal state of a turnout, turnout clearance detectors are widely used. These devices consider a failure of a turnout clearance detectors to be a failure of the turnout system, that could hinder train operations. Analysis of turnout clearance detector failures is very important to ensure normal train operation. We categorized failures of detectors into four groups to identify failure characteristics of the 140 detectors, which are composed of main line detectors (A), side tracks (B), detectors that are in operation more than 80 times a day (C) and detectors that are in operation fewer than 10 times per day. Failures of detectors have mainly been caused in the control part, in the cables and sensors; failures are classified into four groups (A, B, C and D). We have tried to find failure density distributions for each type of failures, inferring the parameter distributions a priori. Finally, using the Bayesian inference we proposed a maintenance time for control parts through the mean time of the detector, life and the life expectancy.

• Journal of the Korean Institute of Gas
• /
• v.4 no.4 s.12
• /
• pp.6-12
• /
• 2000

We have developed a new split tee which can be used to effectively branch into a main gas steel pipelines without losing any gas pressure or having to shut down a line. The split tee has been designed considering the locations of branch connection to the pipelines. Therefore, we could keep the depth of buried pipelines which used to be the problem of the conventional split tees. Test results of the developed split tee showed that the performance of the tightness, hydraulic strength, sealing, welding, bending, and compatibility were excellent. The application of the split tee can provide the advantage of eliminating cost and time, and easy field pipeline coatings.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1591-1592
• /
• 2015

분기기는 선로가 분기되거나 또는 교차하는 지점에 설치되어 열차의 이동 방향을 안전하게 변경하는 역할을 한다. 그러나, 운영 노선 및 동작 환경에 따라 비정상적인 힘이 분기기에 발생할 경우, 정확한 진단 및 검측을 실시할 수 없는 단점이 있다. 본 논문은 국내에서 사용중인 MJ81 전기선로전환기의 전환기능과 쇄정기능의 특성 분석을 통해 기존에 사용된 분기기 전환력 측정의 문제점을 제시한 후, 이를 해결하기 위한 센서 활용 분기기 전환력 측정 방법을 제시한다.

• Journal of the Korean Society for Railway
• /
• v.20 no.2
• /
• pp.210-222
• /
• 2017

Railway turnout systems play a key role in railway systems that change train directions. The turnout systems are one of the weakest systems in railway systems, and consecutive maintenance is required. A turnout diagnostic system can automatically measure the turnout status and its deterioration. To diagnose the turnout systems, we follow conventional maintenance procedures and need to identify their physical characteristics to coincide the procedures and the characteristics. According to the physical characteristics, we should choose and install adequate sensors on the turnout systems to measure their physical characteristics. We studied the phenomenon of the turnout system responses for point moving and train running on the turnout systems. We installed sensors on the turnout system in a revenue line to measure the identified physical quantities and to reveal the robustness of the sensors under the turnout system environment.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.307-314
• /
• 2009

The present paper briefly describes the space frame element and the fundamental strategies in computational elastic bifurcation theory of geometrically nonlinear, single load parameter conservative elastic spatial structures. A method for large deformation(rotation) analysis of space frame is based on an eulerian formulation, which takes into consideration the effects of large joint translations and rotations with finite deformation(rotation). The local member force-deformation relationships are based on the beam-column approach, and the change in member chord lengths caused by axial strain and flexural bowing are taken into account. and the derived geometric stiffness matrix is unsymmetric because of the fact that finite rotations are not commutative under addition. To detect the singular point such as bifurcation point, an iterative pin-pointing algorithm is proposed. And the path switching mode for bifurcation path is based on the non-negative eigen-value and it's corresponding eigen-vector. Some numerical examples for bifurcation analysis are carried out for a plane frame, plane circular arch and space dome structures are described.