• Title/Summary/Keyword: 분기이론

Search Result 95, Processing Time 0.026 seconds

A Study on the Determination of Shock Loss Coefficient on the Branch in the Double-deck Road Tunnel for Small Car (소형차 전용 복층터널 분기부에서의 충격손실 계수 결정 연구)

  • Rho, Jang-hoon;Lee, Seung-jun;Kim, Jin
    • Tunnel and Underground Space
    • /
    • v.27 no.1
    • /
    • pp.50-57
    • /
    • 2017
  • In this study, the experiment for determining shock loss at the branch is conducted for the design of network double-deck road tunnel ventilation. The shock loss coefficient that determines the quantity of shock loss has been considered only regarding the constant aspect ratio of circular or rectangular section. However the suggestion of shock loss coefficient is needed since the aspect ratio of double-deck road tunnel for small vehicle is considered around 1:3 with the low height in Korea. The experiment model was made with the scale of around 1:23 applying Reynolds similarity law, so that the shock loss coefficient on the branch of the large aspect ratio was measured. The result of the study showed that shock loss coefficients of both split branch and straight branch were measured two to three times higher than those calculated from the theoretical equation or design values of previous studies. Therefore the study resulted the effect of large aspect ratio on shock loss coefficient was huge, and it is expected that precise design value can be suggested for the design of network double-deck tunnel ventilation.

정규모드 동역학을 활용한 비선형 진동

  • 박철희
    • Journal of KSNVE
    • /
    • v.7 no.1
    • /
    • pp.6-12
    • /
    • 1997
  • 물리계에서 일어나는 동적 현상들은 선형해석 만으로 설명하기에는 불충분한 점이 많이 있다. 이는 기계구조물과 같은 실제 계의 진동이 기하학적 비선형성, 강성 의 비선형성 또는 경계조건의 비선형성 등의 영향으로 비선형적인 거동을 하기 때문 이다. 비선형 진동을 하는 기계 계는 우리 주변에서 쉽게 찾아 볼 수 있는데, 그 예로써 진자운동을 포함하여 동흡진기, 회전체계, 공작기계의 절삭운동, 건마찰 (dry friction) 관련 기계장치, 치차 및 기차의 바퀴와 레일 간의 접촉에서 볼수 있는 구분적 선형(piecewise linear) 진동계, 충격 진동계 등을 들 수 있다. 비선형 진동 연구는 limit cycle, 준주기운동(quasiperiodic motion), 점프현상(jump phenomena) 등의 인식에서 시작되어, 과거에는 설명이 안되어 회피되 왔던 랜덤(random) 형태의 비주기운동에 대한 연구로 까지 발전하고 있다. 비선형 진동을 다루는데 있어서 정규모드(normal mode)를 이용하는 방법이 있다. 일반적으로 선형계는 선형 정규모드 (linear normal mode)가 존재하는 것과 같이 비선형계에도 이와 유사한 정규모드가 존재한다는 사실이 연구 보고된 바 있다. 비선형계에 존재하는 정규모드는 계의 매개 변수(system parameters)에 따라 그 안정성이 바뀔 수 있으며, 만일 안정한 정규모드 가 어떤 매개변수에서 그 안정성이 바뀐다면 선형이론으로는 설명될 수 없는 새로운 운동이 일어나고 이러한 운동을 분기모드(bifurcation mode)라고 한다. 안정한 정규 모드 및 분기모드를 포함하여 비선형계를 다류는 것을 "정규모드 동역학(normal mode dynamics)"이라고 한다. 정규모드 동역학은 앞에서 언급된 비선형 현상들의 원인규명, 예측, 안정성해석 및 강제진동 해석을 가능하게 한다. 또한 최근에 활발히 연구되고 있는 혼돈운동(chaotic motion)의 해석도 가능하다. 이 글에서는 비선형 진동해석을 위한 정규모드 동역학에 대한 연구동향 및 기본 이론을 살펴 보았고, 그 적용 예를 통하여 실험결과와 비교 고찰 함으로써 정규모드 동역학의 적용성을 서술하여 보았다. 선형이론으로 이해하기 어려운 현상들에 대하여는 비선형의 관점에서 새롭게 접근하 려는 노력이 필요하며 비선형 이론에 대한 연구가 지속적으로 진행되어야 한다. 진행되어야 한다.

  • PDF

Peridynamic Modeling for Crack Propagation Analysis of Materials (페리다이나믹 이론 모델을 이용한 재료의 균열 진전 해석)

  • Chung, Won-Jun;Oterkus, Erkan;Lee, Jae-Myung
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.31 no.2
    • /
    • pp.105-114
    • /
    • 2018
  • In this paper, the computer simulations are carried out by using the peridynamic theory model with various conditions including quasi-static loads, dynamic loads and crack propagation, branching crack pattern and isotropic materials, orthotropic materials. Three examples, a plate with a hole under quasi-static loading, a plate with a pre-existing crack under dynamic loading and a lamina with a pre-existing crack under quasi-static loading are analyzed by computational simulations. In order to simulate the quasi-static load, an adaptive dynamic relaxation technique is used. In the orthotropic material analysis, a homogenization method is used considering the strain energy density ratio between the classical continuum mechanics and the peridynamic. As a result, crack propagation and branching cracks are observed successfully and the direction and initiation of the crack are also captured within the peridynamic modeling. In case of applying peridynamic used homogenization method to a relatively complicated orthotropic material, it is also verified by comparing with experimental results.

Comparative Study of Bifurcation Behavior of Rubber in Accordance with the Constitutive Equations (구성방정식에 따른 고무 분기점 거동 비교 연구)

  • Park, Moon-Shik;Song, Seung
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.34 no.6
    • /
    • pp.731-742
    • /
    • 2010
  • Modeling of rubber for design or analysis often requires confusing or complex work because there are a large number of constitutive models to be considered. Some models have few material constants, while others have many. Researchers have to prepare and fit extensive experimental data with caution and discretion. In this paper, we first compared some typical rubber models in which deformation was carried out by stretching up to around eight times the original size. We conclude that continuum-based models and chain molecular models can be used in the study of the small deformation in most engineering applications, but chain molecular models are preferred in the study of the large deformations in most biomaterial applications. As discrimination problems, Treloar's patch and cylindrical balloon stick are tested theoretically and numerically for studying bifurcation. In the case of Treloar's patch, by using the Kearsley's equation, we show that bifurcation exists for continuum-based models but not for chain molecular models. Both models show bifurcation in the cylindrical balloon stick. Therefore, in the analysis of the bifurcation of rubber showed that its existence also depends on the constitutive model selected.

A New Analysis Method and Broad-Band Design of Tap-Offs for CATV/DBS Systems (CATV/DBS용 신호분기기의 새로운 해석법 및 광대역 설계)

  • Kim, Dong-Il;Hwang, Jae-Hyeon;Yu, Hyeon-Uk;Ha, Do-Hun;Jeong, Se-Mo
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.37 no.12
    • /
    • pp.22-31
    • /
    • 2000
  • A new analysis method of Tap-011 for CATV and DBS systems was proposed and investigated by using 4-port and 3-port equivalent circuits. As an analysis method the even odd-mode theory for a symmetrical coupled-line directional coupler was introduced, and then it was applied to transformer type directional coupler. By comparing the results of simulation and measurement, the validity of the proposed analysis method was confirmed. Furthermore, the Tap-off has been broadened from 5 MHz to 2.500 MHz by adopting the proposed theory.

  • PDF

A method to estimate the initial state probability for improving the applicability of GIUH (초기확률의 보정을 통한 GIUH 적용성 향상)

  • Joo, Jin-Gul;Ham, Dae-Heon;Jun, Hwan-Don;Kim, Joong-Hoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.219-223
    • /
    • 2007
  • 관측자료 없이 지형인자만으로 미계측 유역의 유출수문해석이 가능한 GIUH(Geomorphologic Instantaneous Unit Hydrograph)의 초기확률을 상안미, 병천, 산계 유역에 대하여 분석하였다. GIUH 이론에서 하천차수가 증가할수록 면적비에 대한 분기비의 영향이 증가하여 대상유역에서의 초기확률이 음수로 발생할 확률이 커진다. 본 연구의 4차하천으로 가정된 모든 대상유역에서의 초기확률 역시 음수로 발생하였다. 뿐만아니라, 3차 하천으로 가정된 경우에도 2차 하천의 합류부에서 유역출구까지의 거리가 짧은 산계유역의 경우에는 면적비에 대한 분기비값이 상대적으로 큰 값을 갖게되어 초기확률이 음수로 발생하였다. 본 연구에서는 초기확률이 음수로 발생하는 문제점을 보완하기 위하여 직접유출면적비를 사용하여 초기확률을 산정하였다. 그 결과, 적절한 초기확률값을 얻을 수 있었으며 순간단위도의 초반부 음수 발생문제를 해결하였다.

  • PDF

An Experimental Study on Validation of Nonlinear Critical Speed (비선형 임계속도 검증을 위한 실험적 연구)

  • 정우진;김성원
    • Journal of the Korean Society for Railway
    • /
    • v.3 no.1
    • /
    • pp.12-18
    • /
    • 2000
  • This paper addresses the experimental study on the nonlinear critical speed and the validity of simple prediction formulation. The experiment on nonlinear critical speed is carried out using roller rigs, which has been impossible on track because of a possibility of an accident. In addition, experiment for a bogie is performed to check the difference in modeling a full railway vehicle and a bogie. It is found that nonlinear critical speed proves to be an inherent phenomenon of a railway vehicle itself and the difference of test results between a full railway vehicle and a bogie is comparatively negligible. Finally. the accuracy of simple prediction formulation for outbreak velocity and response frequency in hunting is investigated.

  • PDF

A Distributed Nearest Neighbor Heuristic with Bounding Function (분기 함수를 적용한 분산 최근접 휴리스틱)

  • Kim, Jung-Sook
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.29 no.7
    • /
    • pp.377-383
    • /
    • 2002
  • The TSP(Traveling Salesman Problem) has been known as NP-complete, there have been various studies to find the near optimal solution. The nearest neighbor heuristic is more simple than the other algorithms which are to find the optimal solution. This paper designs and implements a new distributed nearest neighbor heuristic with bounding function for the TSP using the master/slave model of PVM(Parallel Virtual Machine). Distributed genetic algorithm obtains a near optimal solution and distributed nearest neighbor heuristic finds an optimal solution for the TSP using the near optimal value obtained by distributed genetic algorithm as the initial bounding value. Especially, we get more speedup using a new genetic operator in the genetic algorithm.

Performance Analyses of Instruction Fetch Models Considering Cache Miss and Branch Misprediction (캐쉬 미스와 분기예측 실패를 고려한 명령어 페치 모델의 성능분석)

  • Kim, Seon-Mo;Jeong, Jin-Ha;Choe, Sang-Bang
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.28 no.12
    • /
    • pp.685-697
    • /
    • 2001
  • Cache memories are small fast memories used to temporarily hold the contents of main memory that are likely to be referenced by processors so as to reduce instruction and data access time. In this paper, we represent analytical models of instruction fetch process for four types of instruction cache structures that can be used for superscalar processors. In the models, we define various kinds of architectural parameters and take cache miss and branch misprediction into consideration. To prove the correctness of the proposed models, we performed extensive simulations and compared the results with the analytical models. Simulation results showed that the proposed model can estimate the instruction fetch rate accurately within 10% error in most cases. Both analytical model and simulation show that the increase of cache misses reduces the instruction fetch rate more severely than that of branch misprediction does. However, the analytical model can explain the causes of performance degradation which cannot be uncovered by the simulation method only. The model is also able to provide exact relationship between cache miss and branch misprediction for instruction fetch analysis.

  • PDF

An Empirical Study on the long-term Relationship between House Prices and Inflation in the U.S. (주택가격과 물가의 장기관련성에 관한 실증연구 : 미국을 중심으로)

  • Lee, Young Soo
    • International Area Studies Review
    • /
    • v.14 no.3
    • /
    • pp.246-263
    • /
    • 2010
  • This study examines how the long-run relations between housing price and inflation in the United Sates have changed since the year of 2000. Johansen co-integration test, estimation of long-run equilibrium equation, and Granger causality tests are conducted, based on the VECM. Data covers the period from the first quarter of 1975 to the second quarter of 2010. I adopt the recursive estimation method in which the final period of the estimation is expanded by one quarter, starting from the first quarter of 2000. The empirical results are as follows: (1) In spite of the sharp increase of housing price, the long-run relationship of house prices and inflation has been remained stable until 2007, showing that house prices are a stable inflation hedge in the long run. (2) The housing price plunge since 1997 does not seem to be related to the restore of the long-run relationship between housing prices and inflation. (3) Granger causality test results support the hypothesis that inflation granger-causes housing prices with 10% significance level, but reject the hypothesis that housing price granger-causes inflation.