• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.471-476
• /
• 2008

도시지역의 침수피해를 방지하기 위해서는 침수범위와 침수심을 예측하여 예상 침수심에 대응하기 위한 방어대책을 수립하여야 한다. 한편 이러한 침수범위와 침수심을 예측하는 방법은 대상지역의 특성 및 지리적 여건 등에 따라 달라지며 가용자료에 따라 달라진다. 본 연구에서는 도시지역의 특성에 따른 침수대책의 기준이 되는 방어침수위 설정방법을 GIS 분석을 통하여 비교분석하였다. 방어침수위 설정방법은 과거 침수실적을 이용하는 방법 인근하천의 계획홍수위를 연장하는 방법, 하천의 임계지속기간과 소유역의 임계지속기간에 대한 강우빈도별 시나리오 분석에 의한 내수침수를 모의하는 방법 등의 네가지 방법을 서울시 중랑천 연변의 장안배수분구에 해하여 적용하였다. 분석결과 인접하천의 계획홍수위를 단순연장하는 방법을 제외하고는 다소의 차이는 있으나 대체로 유사한 결과를 보였다. 침수원인이 내수침수에 의한 지역일 경우에는 방어침수위로 침수실적자료를 이용한 과거 최대침수위를 적용하거나, 인근하천의 계획홍수량을 발생시키는 강우사상에 대한 내수침수 모의결과를 적용하는 것이 합리적일 것으로 판단된다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.284-287
• /
• 2004

홍제천 유역의 평창 배수분구를 대상으로 합류식 하수관거 월류수의 발생특성을 파악하고자 유량 및 오염물질 발생경향, 오염물질별 상관관계, 연간 강우유출 오염부하량 등에 대하여 살펴보았다. 강우시 오염물질의 초기세척현상은 누적오염 부하량비를 이용하여 분석하였으며, 모든 수질항목에 대하여 초기유출현상이 나타났으며, 초기 $20\%$ 유출 유량에서 오염부하가 $30\%$ 정도로 유출되고 있는 것으로 분석되었다. 또한 수질항목별 상관계수를 보면, 건기시의 상관계수는 COD와 SS가 0.4857, 월류수의 경우에는 SS와 TN의 상관계수가 0.7723으로 가장 크게 나타났다. 연간 강우에 의하여 방류선으로 배출되는 면적당 오염부하는 COD 1,202kg/ha/yr SS 494kg/ha/yr로 산정되었다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.275-277
• /
• 2004

본 연구에서는 아산시의 풍기처리구역을 대상으로 건기시 하수발생량 및 농도의 시간적, 공간적 변화를 조사하였다. 또한 주중과 주말의 하수발생 특성을 알아보기 위해 조사기간내 연속측정된 하수발생량을 요일별로 나누어 각각의 하수발생특성을 조사하였다. 조사 결과 주거지역인 풍기처리구역은 상업지역과는 다르게 직장인의 퇴근 후인 저녁시간대에 하수량이 증가하였다가 점차로 감소하여 새벽녘 4시경에 최소가 되는 것으로 조사되었다. 수질농도는 하수의 피크유량이 발생하였을 때 상대적으로 높았고, 최소유량이 발생하는 새벽시간대에 가장 낮은 농도를 나타내는 것으로 조사되었다. 주중과 주말의 하수발생 특성을 보면, 상업지역의 하수발생량은 주중과 주말의 차이가 뚜렷하게 나타나지 않는 반면 주거지역의 하수발생량은 주말에 직장인들이 가정에 머무르는 시간이 많아지면서 하수량이 증가하는 것으로 조사되었다.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.3
• /
• pp.348-356
• /
• 2005

Water quality sampling surveys and continuous measurement of flow were conducted to identify wastewater flow characteristics for representative catchment of O and M treatment basins in A city. For HS-1 station representing commercial area, wastewater flow rises in the beginning of office-working hours, moves up and down within narrow range, and lasts till office-leaving hour, and falls gradually reflecting worker's returning home. However, in HS-2 station representing residential area, wastewater flow has two peaks, which are before office-going hour and after office-leaving hour. In residential area, the flow rate of weekends is higher than that of weekdays because it reflects population, being not contributed to generate wastewater during the working hours of weekdays, stay home and produce wastewater for weekends period. To determine the priority for rehabilitation of sewer system, infiltration rate was computed by dividing infiltration flow by mean diameter and total length of sewer, and HS-1 station ranked the first.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.282-287
• /
• 2012

This study was carried out to clarify the effects of the application of pesticide by different spray nozzle types on pesticide residues. The average droplet size and discharge rate were investigated when the manual compressed sprayer with two head disk type nozzle and the knapsack engine powered sprayer with two head fan shape nozzles were used. The fan type nozzles were classified into three types by the number of orifice in the nozzle. Three type nozzles tested were fan with one orifice, fan with two orifices and fan with three orifices. Fan (trade name : D-3) with 2.4 L/min. of the discharge rate and $76{\mu}m$ of the average droplet size while maintaining constant pressure $1.1{\pm}0.2$ MPa, and fan D-35 with 2.6 L/min. and $90{\mu}m$ while maintaining constant pressure $1.0{\pm}0.2$ MPa were appropriate. The orifice size of D-3 was 0.65 mm length ${\times}$ 0.45 mm width and the orifice size of D-35 was 0.62 mm length ${\times}$ 0.46 mm width. The residue levels of imidacloprid on perilla leaves among four applications by four different nozzles show significantly difference with 5% significance level. The residue levels $3.76{\sim}3.92mg\;kg^{-1}$ by fan or disk type is smaller than $4.52{\sim}4.92mg\;kg^{-1}$ by fan II or fan III. The residue levels of imidacloprid on perilla leaf were different depend on the spray nozzles type.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.585-592
• /
• 2017

Most sewer lines buried in the city are likely to be collapsed due to serious aging. Also, due to the high concentration of development and high population density and traffic, the collapse of the sewer will cause enormous social and economic damage. Therefore, proactive maintenance is required to prevent accidents caused by deteriorated sewer pipe. In order to utilize limited budget effectively, risk-based prioritization methods should be proposed that simultaneously consider the consequence of failure and the probability of failure. In this study, the method of risk-based prioritization of sewer was examined by reviewing various cases of overseas studies and applied to the urban sub-catchment. First, the impact factors that can be secured through the sewer GIS DB in Seoul were derived, and the weight, sub-criteria, and impact score of each impact factor were determined and the consequence of failure was calculated by weight sum method. In addition, the probability of failure was calculated by dividing the service life by the estimated useful life, and the consequence of failure and the probability of failure were classified into five grades by the Jenks natural breaks classification method. The prioritization method was applied to sub-catchment in the Seoul to derive a risk matrix and a risk grade. As a result, 26% of all subjects were selected as the inspection priority subjects with 4-5 risk grade. Therefore, using the risk-based CCTV prioritization methodology, it will be possible to systematically determine the objects that need investigation first.

• Journal of Korea Water Resources Association
• /
• v.49 no.12
• /
• pp.981-993
• /
• 2016

This study explains the GIS database of flood inundation area developed for Samsung-1 Drainage Sector, Seoul, Korea. The XP-SWMM dual drainage model was developed for the study area, and the time series observed at the watershed outlet was used to obtain the watershed time of concentration and to calibrate the XP-SWMM model. The rainfall scenario was developed by dividing the 40 minute watershed time of concentration into two 20-minute time steps and then applying the gradually increasing 5 mm/hr interval rainfall intensity to each of the time step up to 200 mm/hr, which is the probable maximum precipitation of the study area. The developed rainfall scenarios was used as the input of the XP-SWMM model to obtain the database of the flood inundation area. The analysis on the developed GIS database revealed that: (1) For the same increment of the rainfall, the increase of the flooded area can be different, and this was caused by topographic characteristics and spatial formation of pipe network of the study area; (2) For the same flooded area, the spatial extent can be significantly different depending on the temporal distribution of rainfall; and (3) For the same amount of the design rainfall, the flood inundation area and the extent can be significantly different depending on the temporal distribution of rainfall.

• Journal of Korea Water Resources Association
• /
• v.51 no.1
• /
• pp.81-88
• /
• 2018

The rainfall-runoff model made of sewer networks in the urban area is vast and complex, making it unsuitable for real-time urban flood forecasting. Therefore, the rainfall-runoff model is constructed and simplified using the sewer network of Daerim baisn. The network simplification process was composed of 5 steps based on cumulative drainage area and all parameters of SWMM were calculated using weighted area. Also, in order to estimate the optimal simplification range of the sewage network, runoff and flood analysis was carried out by 5 simplification ranges. As a result, the number of nodes, conduits and the simulation time were constantly reduced to 50~90% according to the simplification ranges. The runoff results of simplified models show the same result before the simplification. In the 2D flood analysis, as the simplification range increases by cumulative drainage area, the number of overflow nodes significantly decreased and the positions were changed, but similar flooding pattern was appeared. However, in the case of more than 6 ha cumulative drainage area, some inundation areas could not be occurred because of deleted nodes from upstream. As a result of comparing flood area and flood depth, it was analyzed that the flood result based on simplification range of 1 ha cumulative drainage area is most similar to the analysis result before simplification. It is expected that this study can be used as reliable data suitable for real-time urban flood forecasting by simplifying sewer network considering SWMM parameters.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.744-748
• /
• 2008

우리의 삶의 터전이 도시화됨에 따라 수문현상에도 많은 변화가 생겼다. 이로 인해 기존의 수문해석을 위한 방법을 대신해 도시화된 유역의 새로운 수문해석 방법의 개발이 불가피하게 되었다. 이에 따라 본 연구에서는 도시유출 모형인 SWMM의 대표적 프로그램인 XP-SWMM을 이용하여 도시유역의 유출모의를 하였다. 대상유역으로 선정한 곳은가양천배수분구로 전형적인 도시 하천 유역모습을 하고 있다. 이 유역의 특성치와 확률강우량 산정 후 XP-SWMM 모형에 적용시켜 재현기간별 첨두홍수량을 구하고, 동일 유역을 HEC-HMS로 모의하여 그 차이를 분석하였다. 도시화가 진행되면서 대규모 시설 등이 들어서면서 도로와 인도가 포장되므로 침투는 감소하고, 따라서 유역내 조도계수가 감소되며, 수로망 정비 등에 의해 유입시간이 빨라져 첨두홍수량이 증가하게 되었다. 이와 같은 변화로 인해 기존 홍수량을 구하기 위한 방법의 변화는 필수 불가결하게 되었다. 따라서 본 연구의 중점과제인 저류지에 의한 홍수조절능력에 대한 분석은 대상 유역내에 일정한 크기의 저류지를 상 중 하류위치에 따라 지점선정 후 그에 따른 홍수량과 침수량의 변화를 비교..분석하여 저류지 위치별 홍수조절능력에 대한 평가를 실시하였다.

• Journal of Korean Society on Water Environment
• /
• v.29 no.6
• /
• pp.730-738
• /
• 2013

In recent years, low impact development (LID) has emerged as an effective approach to control stormwater in an urban area, and watershed and stormwater managers need modeling tools to evaluate alternative plans for controlling stormwater. This study illustrates how to design and evaluate the effect of non-point pollutant management using SUSTAIN which is developed by USEPA. SUSTAIN can provide evaluating, selecting, and placing LID facilities in an urban catchment based on user-defined cost-effectiveness criteria. Also, this paper suggests a minimal methodology for estimating model parameters for modeling an ungauged urban catchment to reflect the situation of typical Korean urban interested catchments which are usually ungauged. In addition, the optimal length of various LID facilities and the optimal number of units in our test catchment are estimated.