• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.6
• /
• pp.9-18
• /
• 2019

This study derives load characteristics and analyzes the safety of plowshares operating in dry fields. We mounted a three-blade, reversible plow on a 23.7 kW tractor and measured the plow's tractive force as well as the torque from the engine output shaft on the rear axle under various working speeds (L4, M1, M2, M3). We chose a Korean test site of Seomyeon, Chuncheon with sandy soil texture, as determined using the USDA method. We constructed the load spectrum for torque and tractive force using measured data and derived the fatigue life of the plowshare from a stress-cycle (S-N) curve of the plow material. Our results show that the M3 gear maximizes the driving shaft torque loads and, applying the tractive force load spectrum, creates a cumulative damage sum of $4.14{\times}10^{-5}$. Considering sampling time, we estimate a fatigue life of 805 hours while using the M3 gear. When using the other working speeds, however, all of the stress levels fell within the endurance limits and, therefore, our model predicts infinite plowshare lifetimes. For this analysis, we used a yield strength of 1,079 MPa for the plowshare and static safety factors, analyzed using the maximum stress, between 6.83 and 8.63 under each working speed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.2
• /
• pp.117-125
• /
• 2000

The waveform and spectrum analysis of Tursiops truncatus(bottlenose dolphin) sonar signals were carried out on the basis of data collected during the dolphin show at the aquarium of Cheju Pacificland from October 1998 to February 1999. When greeting to audience, the pulse width, peak frequency and spectrum level from the five dolphins'sonar signals were 3.0ms, 4.54kHz and 125.6dB, respectively. At the time of warm-up just before the show, their figures were 5.0㎳, 5.24kHz and 127.0dB, respectively. During the performance of dolphins, with singing, peak frequency ranged 3.28∼5.78kHz and spectrum level ranged 137.0∼142.0dB. With playing ring, pulse width, peak frequency and spectrum level were 7.0㎳, 2.54kHz and 135.9dB, and when playing the ball, the values were 9.0㎳, 2.78kHz and 135.2dB, respectively. The values determined from the five dolphins during jump-up out of water were : pulse width 2.0㎳, peak frequency 4.50kHz and spectrum level 126.8dB. When they responded to trainer's instructions, the values were 2.25㎳, 248kHz and 148.7dB, respectively, and greeting to audience, the peak frequency and spectrum level were 5.84kHz and 122.5dB. During swimming under water, peak frequency and spectrum level were determined to be 10.10kHz and 126.8dB. It was found that there exited close consistencies in pulse width, frequency distribution and spectrum level between whistle sounds and dolphin's sonar signals. Accordingly, the dolphins can be easily trained by using whistle sound based on the results obtained from the waveform and spectrum of the dolphin's sonar signals.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2067-2069
• /
• 2003

본 연구는 진동 신호의 전력 스펙트럼 밀도(PSD)해석을 이용하여 베어링 초기 고장을 검출할 수 있는 기법을 제시하였다. 외륜, 내륜, 볼에 대하여 각각 폭 0.3 mm의 미소한 흠을 낸 베어링을 이용하여 고장 특성 주파수 패턴 및 부하변동에 따른 영향을 분석하고 고장검출이 용이한 고장 주파수 대역을 설정하였다. 실험결과로부터 제시된 검출기법이 유도전동기 베어링 초기 고장에 적용 가능함을 입증하였다.

• Journal of Biosystems Engineering
• /
• v.23 no.5
• /
• pp.417-426
• /
• 1998

This study was intended to investigate the characteristics of loads acting on the transmission of agricultural tractors during plowing, rotavating and transporting operations. A survey was conducted to determine working speeds and transmission gears most frequently used for each operations. The transmission loads were measured at the input shaft of the transmission gear box during each operations. Time histories of the measured torque loads were converted into a load spectrum and analyzed with respect to the S-N curve of the shaft material to estimate the partial damages on the transmission. Finally, comparison of the relative damages and severeness of each operation was presented and discussed.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2146-2147
• /
• 2011

전기화재의 원인인 아크 신호는 전류 돌입형, 비선형 및 전류 단속형 부하들의 정상상태와 유사한 전류파형을 갖는다. 이러한 부하들에서 아크를 정확하게 검출하기 위해서는 아크 유무를 정확히 판단 할 수 있는 시스템이 필요하며 이러한 시스템에서 아크검출을 정확히 하는 필터가 중요하다. 본 논문에서는 UL1699의 직렬 아크 발생장치로 아크를 발생시키고 시간 및 주파수 영역에서 아크 전류파형을 분석하였다. 분석결과 아크전류파형은 시간영역에서는 영점전류의 처짐 현상(shoulder)이 발생하고 주파수영역에서는 60Hz의 고조파 성분을 제외한 전대역의 주파수에 걸쳐서 스펙트럼이 증가하였다. 본 논문에서 제시된 아크 검출용 필터는 이러한 특징들 중 주파수 영역의 특징을 검출한다.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.531-533
• /
• 2000

배전계통에서 전력전자 설비의 증가는 고조파 왜곡현상과 더불어 그로 인해 발생되는 계통 설비와 운용에 미치는 영향에 대한 관심의 증대를 가져오게 하였다. 그러므로, 최근에 고조파 연구는 전력계통의 분석과 설계에 있어 중요한 관점이 되고 있다. 고조파와 관련된 컴퓨터 시뮬레이션들은 전력계통에서 전압 왜곡현상을 나타내는 방법으로 사용되어져 왔으며, 많은 디지털 컴퓨터 프로그램들이 고조파 분석을 위해서 사용되고 있다. 주파수 스펙트럼 분석에 있어서, SuperHarm을 이용한 컴퓨터 시뮬레이션은 다른 프로그램을 사용하는 것보다 효과적인 방법이다. 본 연구에서는 SuperHarm을 이용한 컴퓨터 시뮬레이션으로 비선형 부하인 가변속 구동장치의 부하 변동에 따른 고조파 전압 분포를 살펴보고, 고조파 저감을 위해 필요한 최적의 고조파 필터를 설계하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.189-191
• /
• 2005

본 연구는 Z-source 인버터롤 단상 능동전력필터에 적용하여 전원 측 고조파 전류를 보상하기 위한 방법을 제시하였다. Z-source 능동전력필터는 연료전지를 dc전원으로 하고 있으며, 단상 p q이론에 의해 보상기준전류가 연산된다. PSIM 시뮬레이션에 의하여 제안된 방법의 보상성능을 확인하였으며, 부하전류와 전원전류에 대한 파형 및 스펙트럼을 비교 검토하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.308.1-308.1
• /
• 2013

여름철 건축물의 냉방 부하 저감 및 자동차 실내의 온도 상승을 억제하기 위하여 일반적으로 단열필름이 사용되고 있다. 실제 시중에 유통되고 있는 단열필름은 크게 유기물 기반의 제품과 무기물 기반 제품으로 나뉘고 있다. 본 연구에서는 유기물 기판의 단열 필름은 내구성이 거의 없기 때문에 무기물 기반의 제품을 위주로 연구를 진행하였다. 단열 필름의 단열 효과가 어느 정도인지를 정확히 알기 위하여 UV-Vis 스펙트럼 분석을 실시하였다. 항온 항습 장치를 이용하여 고온고습 조건에서 무기물 기반의 단열 필름의 성능 변화를 통하여 내구성 실험을 실시하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.1
• /
• pp.9-17
• /
• 2005

We studied the characteristics of impedance and electromechanical coupling coefficient in ZnO and AIN thin films by using resonance frequency spectrum method. The response peak of impedance decreased with the decrease of thickness of piezoelectrics, the number of mode of response peak decreased with the decrease of substrate thickness. An error of Kt² estimated from input Kt² increased as the thickness of piezoelectrics decreased and the thickness of substrate increased. Also, the error was increased in case of a large acoustic impedance of substrate. It was found that the composite resonator operating in optimized condition could be designed through the resonance frequency spectrum analysis of composited resonator consisted of piezoelectric thin film and substrate.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.6
• /
• pp.35-42
• /
• 2000

In this paper, AE(Acoustic Emission) signals detected from the growth of the electrical tree in an epoxy resin under ac high-voltage application were analysed to diagnose the insulation deterioration of cast-resin power transformer. Frequency spectra of AE signals generated from the magnetizing and the load currents in the actual operating cast-resin power transformer of 500[kVA] under distribution system of 22.9[kV] were also analysed to distinguish the AE signals due to void discharges from the magnetic circuit noises in the core of the transformer. As the experimental results, we could distinguish the AE signals whether those signals were caused due to the void discharges or due to the magnetic circuit noises by analyzing the frequency spectrum of AE signals. The frequency spectra of AE signals generated from the cast-resin power transformer in operation due to both the magnetizing and the load currents appeared in the range of 40-120[kHz], but the frequency band of AE signals emitted from the void discharges in an epoxy resin sample was about 50[kHz] to 230[kHz].