• Title/Summary/Keyword: 부피성

Search Result 1,687, Processing Time 0.031 seconds

The Efficiency and Performance of Porous Film Containing Freshness Maintenance Ingredients (신선도 유지성분을 포함한 다공성 필름의 성능과 효능)

  • Kim, Kyeong-Yee;Lee, Eun-Kyung
    • Food Science and Preservation
    • /
    • v.16 no.6
    • /
    • pp.810-816
    • /
    • 2009
  • To identify effective food packaging compounds that could significantly affect the freshness of stored food, the efficiency and performance of porous polypropylene film containing mustard oil as a freshness maintenance ingredient was studied by GC-MS analysis and storage testing of bread. AITC (allyl-isothiocyanate)-emitting properties of films impregnated with mustard oil were evaluated by GC-MS. AITC was extracted from mustard oil, and used as a vapor as an effective antimicrobial agent. Films were prepared under four different conditions (the film types were abbreviated 25SF1, 25SF2, 50LF, and IAF) and the amounts of AITC inside vinyl packs constructed using the four films were measured. The results showed that the 25SF2 film (width 25 mm, length 20 cm) yielded a greater amount of AITC than did the 50LF film (width 50 mm, length 20 cm). We confirmed that the amount of gas emission showed better between layer and layer of the film side than the internal film. In storage testing using various films at $35^{\circ}C$ for 25 days, 25SF2 film provided excellent preservation of bread compared with 50LF film. This was in line with the fact that 25SF2 film yielded the highest amount of AITC. Emission capacities AITC of 2 cm film were measured using bottles various volumes (43 mL, 500 mL, 1000 mL) and both closed and open systems. The AITC content of the film in 43 mL bottle was much higher than that yielded by other films in the closed system, and AITC was rapidly emitted, with relatively low residual gas emission after 4 days in an open system. Mustard oil is a useful freshness maintenance ingredient hence, analysis of AITC emission kinetics from various films were helpful to develop films with optimal antimicrobial effects, and will allow application of such films in food packaging systems.

THE CERVICAL ISLAND FLAP FOR INTRAORAL RECONSTRUCTION FOLLOWING EXCISION OF ORAL CANCER -REPORT OF 3 CASES- (구강암 적출후 경부 도상 피판을 이용한 구강내 결손부의 재건 -3 치험례-)

  • LEE, Seong-Geun;LIM, Jong-Soo;KIM, Kyung-Hyun;JEON, So-Yeun;CHO, Young-Sung;SHIN, Sang-Hun;CHO, Young-Cheol;SUNG, Iel-Yong;KIM, Uk-Kyu;KIM, Jong-Ryoul;CHUNG, In-Kyo;YANG, Dong-Kyu
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.20 no.3
    • /
    • pp.263-268
    • /
    • 1998
  • Many myocutaneous flaps have been used for the reconstruction of intraoral defects caused by the excision of oral cancer. Among these myocutaneous flaps, cervical island flap has been introduced by Farr et al. Although different in detail, this flap was designed as the platysma myocutaneous flap by Futrell et al in the supraclavicular site. Since many authors applied this flap to cover intraoral defect, they discussed deeply the blood supply of this flap. To improve further flap survival, it was modified by Tashiro et al. This flap makes its vascularity highly reliable. The amount of tissue needed for reconstruction can be accurately planned. The surgical and reconstruction procedure can be performed simply, rapidly, and effectively. Oral functions including deglutition, speech, and denture fitting are not compromised. With it's minimal deformity, new donor fields is not necessory. Of course, we keep in mind that this flap has limitations in patients where much bulk of tissue defects is needed and more than 3000 rad radiation due to the metastasis of neck lymph node is exposed. In three patients with intraoral squamous cell carcinoma($T_{1-3}N_0M_0$), we performed induction chemotherapy with FP regimen including pepleomycin. Thereafter, we ablated oral cancer and peformed reconstruction of intraoral defects with cervical island flap designed by Tashiro et al. Due to these significant benefits and minimal limitations, we have found that this flap is adequate for reconstruction of most intraoral defects following cancer ablation.

  • PDF

Quality Characteristics of Fresh Noodles With Perilla Leaves (들깻잎을 첨가한 생면의 품질특성)

  • Kim, Chang-Yeol;Choi, Sang-Ho;Kim, Jung-Soo
    • Culinary science and hospitality research
    • /
    • v.18 no.2
    • /
    • pp.182-196
    • /
    • 2012
  • This study investigates the optimal application of perilla leaves to fresh noodles in terms of a variety of beneficial effects and functions such as the anti-microbial function of the leaves. First, we measured the water contents of the fresh noodles and found that the ones added with 7% lyophilized perilla leaf extract showed the maximum water contents whereas the control noodles without perilla leaf extract the minimum. Increasing amount of raw perilla leaf extract or lysophilzed perilla leaves in the fresh noodles elevated the L value and significantly reduced the A value. The mass and volume of the fresh noodles were gradually decreased with raw perilla leaves added. Addition of raw perilla leaf extract and lyophilized perilla leaves decreased the turbidity of the fresh noodles. Hardness of the fresh noodles was increased by the addition of lyophilized Perilla leaves. Next, we tested the effect of the addition of sesame leaves on microbial growth. No microbes were found in the fresh noodles in the absence or presence of sesame leaves at day 0. When the noodles were stored for 3 days, the greatest number of bacteria was detected in the noodles without perilla leaves while addition of perilla leaves lowered the amount of bacteria in the noodles. We then performed the sensory test. For the raw perilla leaf extract addition, the noodles with 9% of extract exhibited the highest in appearance, flavor, color (6.47), texture (6.60), and overall acceptability (7.67). Texture was the highest in the ones with 3% (6.87) and 5% (6.20) of extracts added. Overall acceptability (7.07) was the best when 3% perilla leaves were added. Overall, 9% addition of raw perilla leaf extract or 3% addition of lysophilized perilla leaves showed optimal tastes.

  • PDF

Characteristics of Pelletized Swine Manure Compost (돈분뇨 퇴비의 펠렛가공 효과)

  • Jeong, K.H.;Kim, J.H.;Choi, D.Y.;Park, C.H.;Kwag, J.H.;Yoo, Y.H.;Han, M.S.;Jeong, M.S.;Won, H.H.;Yoon, T.Y.
    • Journal of Animal Environmental Science
    • /
    • v.14 no.3
    • /
    • pp.201-210
    • /
    • 2008
  • Farmers directly spread the livestock manure compost on their arable land as an organic fertilizer. However, there are some difficult problems to solve. first, we are unsure of whether the livestock manure compost can meet the nutritional demand of plant. Second, application of the current powered livestock manure compost to crop land is very difficult work due to heavy weight of compost and its powdered shape. For this reason, this study was carried out to develope high quality pelletized livestock manure compost. In pelletizing process with composted manure, the optimal water content for pelletizing was around 30$\sim$40%. When rice bran was mixed with 5% as a bonding agent on volume basis, the pelletizing effect was remarkably improved. On a dry matter basis, the contents of N and P of manure compost were 1.31%, and 0.58%, respectively. After pelletizing, the contents of compost pelleted were 1.37% and 0.54%, respectively. The same parameters of pelletized compost made by screw type Instrument were 1.37% and 0.53%, respectively. The other hand, N and P content of pelletized compost made by pellet mill type instrument were 1.06% and 0.18%, respectively.

  • PDF

Improved Breast Irradiation Techniques Using Multistatic Fields or Three Dimensional Universal Compensators (Multistatic Field또는 3차원 공용보상체를 사용한 유방의 방사선 조사법의 평가)

  • Han Youngyih;Cho Jae Ho;Park Hee Chul;Chu Sung Sil;Suh Chang-Ok
    • Radiation Oncology Journal
    • /
    • v.20 no.1
    • /
    • pp.24-33
    • /
    • 2002
  • Purpose : In order to improve dose homogeneity and to reduce acute toxicity in tangential whole breast radiotherapy, we evaluated two treatment techniques using multiple static fields or universal compensators. Materials and Methods : 1) Multistatic field technique : Using a three dimensional radiation treatment planning system, Adac Pinnacle 4.0, we accomplished a conventional wedged tangential plan. Examining the isodose distributions, a third field which blocked overdose regions was designed and an opposing field was created by using an automatic function of RTPS. Weighting of the beams was tuned until an ideal dose distribution was obtained. Another pair of beams were added when the dose homogeneity was not satisfactory. 2) Universal compensator technique : The breast shapes and sizes were obtained from the CT images of 20 patients who received whole breast radiation therapy at our institution. The data obtained were averaged and a pair of universal physical compensators were designed for the averaged data. DII (Dose Inhomogeneity Index : percentage volume of PTV outside $95\~105\%$ of the prescribed dose) $D_{max}$ (the maximum point dose in the PTV) and isodose distributions for each technique were compared. Results : The multistatic field technique was found to be superior to the conventional technique, reducing the mean value of DII by $14.6\%$ (p value<0.000) and the $D_{max}$ by $4.7\%$ (p value<0.000). The universal compensator was not significantly superior to the conventional technique since it decreased $D_{max}$ by $0.3\%$ (p value=0.867) and reduced DII by $3.7\%$ (p value=0.260). However, it decreased the value of DII by maximum $18\%$ when patients' breast shapes fitted in with the compensator geometry. Conclusion : The multistatic field technique is effective for improving dose homogeneity for whole breast radiation therapy and is applicable to all patients, whereas the use of universal compensators is effective only in patients whose breast shapes fit inwith the universal compensator geometry, and thus has limited applicability.

Peritoneal Protein Loss in Nephrotic Syndrome on Peritoneal Dialysis (복막 투석 중인 신증후군 환자의 복막을 통한 단백 소실)

  • Ahn, Yo-Han;Jung, Eui-Seok;Lee, Se-Eun;Lee, Hyun-Gyung;Lee, So-Hee;Kang, Hee-Gyung;Ha, Il-Soo;Jung, Hae-Il;Choi, Yong
    • Childhood Kidney Diseases
    • /
    • v.13 no.2
    • /
    • pp.189-196
    • /
    • 2009
  • Purpose : The pathophysiologic mechanism of nephrotic syndrome is not yet known clearly. At least in some cases, certain 'circulating factors' are thought to increase the glomerular protein permeability. Considering the systemic effect of the circulating factor on peritoneal membrane, we evaluated the loss of protein through peritoneal membrane in patients on peritoneal dialysis due to the end stage renal disease (ESRD) caused by steroid resistant nephrotic syndrome (SRNS). Methods : We retrospectively reviewed the medical records of 26 pediatric patients on peritoneal dialysis ensued during the period from 2001 to 2007 at our clinic. Twelve patients had SRNS, while 14 patients had ESRD caused by the congenital anomalies of urinary system. Results : While the other parameters including nPNA indicating the adequacy of protein intake were similar between the two groups, serum albumin was lower in SRNS patients than the non-SRNS patients ($3.7{\pm}0.3$ g/dL vs. $4.0{\pm}0.4$ g/dL, P=0.021). Peritoneal protein loss was higher in SRNS patients than in non-SRNS patients ($3,044.4{\pm}837.6\;mg/m^2$/day vs. $1,791.6{\pm}1,244.0\;mg/m^2$/day, P=0.007). The protein permeability of the peritoneal membrane measured by the ratio of total protein concentration in dialysate to plasma was twice as high in SRNS patients as the non-SRNS ($1.06{\pm}0.46%$ vs. $0.58{\pm}0.43%$, P=0.010). After 1 year, peritoneal protein loss increased in both patient groups, but to a significantly greater degree in non-SRNS patient (P=0.023). Conclusion : The results of our study support the notion that in nephrotic syndrome there are some 'circulating factors' with the systemic effect. Since the greater protein loss through peritoneal membrane in SRNS was confirmed in this study, more meticulous nutritional support and close monitoring on the nutrition are required in these patients.

High-Rate Phosphorous Removal by PAC (Poly Aluminum Chloride) Coagulation of A2O Effluent (생물공정 처리수의 PAC (Poly Aluminum Chloride) 응집에 의한 고효율 인 제거 특성)

  • Hwang, Eung-Ju;Cheon, Hyo-Chang
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.31 no.8
    • /
    • pp.673-678
    • /
    • 2009
  • High-rate phosphorous removal by PAC (poly aluminum chloride) coagulation of A2O effluent was investigate to meet the stringent requirement of wastewater discharge from municipal wastewater treatment plant. A series of jar tests were conducted to find optimum coagulation condition and to enhance removal efficiency. The optimum volumetric concentration of PAC was 30 ppm (2.81mol Al/mol P by mol ratio). Only 17.2% of soluble P was removed for 30 minutes' settling without PAC addition, while this increased to 30.3% by dosing 10ppm PAC. It even increased conspicuously from 49.3% to 88.4% by increasing PAC dose from 20 ppm to 30 ppm. 92.4% of total P was removed by 30 ppm PAC, and the effluent concentration (0.3 mg/L) was acceptable for discharge. The optimum value of coagulation time, settling time, and pH were 4minutes, 20 minutes, and 7.0, respectively. It was not necessary to control pH of raw sample whose pH was 7.0. Soluble P removal was remarkably enhanced at pH 7.0. This implied that sweep floc formation by $Al(OH)_3$ was the main mechanism of coagulation for soluble P removal. Influent and effluent of secondary clarifier were tested for coagulation, and the effluent was better for high-rate P removal. It resulted in 0.18 mg/L of P and 95.4% of P removal by coagulation. It was favorable to recycle the treated water to coagulation tank and the optimum recycle ratio was 0.3.

Manufacture of the vol-oxidizer with a capacity of 20 kg HM/batch in $UO_2$ pellets using a design model (설계 모델을 이용한 $UO_2$ 펠릿 20 kg HM/batch용 분말화 장치 제작)

  • Kim Young-Hwan;Yoon Ji-Sup;Jung Jae-Hoo;Hong Dong-Hee;Uhm Jae-Beop
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.4 no.3
    • /
    • pp.255-263
    • /
    • 2006
  • Vol-oxidizer is a device to convert $UO_2$ pellets into $U_3O_8$ powder and to feed a homogeneous powder into a Metal Conversion Reactor in the ACP(Advanced Spent Fuel Conditioning Process). In this paper, we propose a design model of the vol-oxidizer, develop the new vol-oxidizer with a capacity of 20 kg HM/batch in $UO_2$ pellets, and conduct a verification for the device. Design considerations include the internal structure, the capacity, the heating position of the device, and the size. The dimensions of the new vol-oxidizer are decided by the design model. We determine a permeability test of the $U_3O_8$ measuring the temperature distribution, and the volume of $UO_2$ and $U_3O_8$. We manufactured the new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets, and then analyzed the characteristics of the $U_3O_8$ powder for the verification. The experimental results show that the permeability of the $U_3O_8$ throughout mesh enhance more than old vol-oxidizer, the oxidation time takes only 8 hours when compared with the 13 hours of the old device, and the average distribution of particle size is $40{\mu}m$. The capacities of new vol-oxidizer for a 20 kg HM/batch in $UO_2$ pellets were agree well with the predictions of design model.

  • PDF

Effect of Natural Tenderizers or Phosphates on Quality Improvement of the Low-grade Seasoned Hanwoo Ribs (천연연화제 및 인산염의 첨가가 저급양념한우갈비의 품질개선에 미치는 효과)

  • Kim, K. J.;Min, J. S.;Lee, S. O.;Jang, A.;Jang, S. H.;Cheon, Y. H.;Lee, M.
    • Journal of Animal Science and Technology
    • /
    • v.45 no.2
    • /
    • pp.309-318
    • /
    • 2003
  • In order to improve the quality of low-grade seasoned ribs, kiwi powder, pear powder and phosphates were studied. To seasoned ribs, 0.1%, 0.3% or 0.5% of kiwi powder was added and their MFI(Myofibrillar Fragmentation Index) values were 341.4, 368.3 and 405.1, respectively. As the amount of kiwi increased, MFI value increased(p<0.001). Also, when 0.5%, 1.0% or 3.0% of pear powder was added to seasoned ribs, their MFI values were increased as the addition levels of pear powder increased. As the amount of kiwi and pear powder were increased, WHC(Water Holding Capacity) decreased(p<0.001). On the other hand, as the amount of phosphates added increased, WHC increased. In drip loss, as the amount of kiwi and pear powder increased, it increased. However, drip loss was decreased as the amount of phosphates increased. For meat color, ‘L’ values of pear treatment groups were similar to those of control and ‘a’ values were higher in the treatment groups of 0.1${\sim}$0.3% kiwi powder, 0.5${\sim}$1.0% pear powder and 0.3${\sim}$0.5% phosphate than those of control. In sensory evaluation, treatment group of 0.3% kiwi powder and 0.5% phosphate showed the highest values in juiciness, tenderness and acceptability among the treatments(p<0.01).

Source Term Characterization for Structural Components in $17{\times}17$ KOFA Spent Fuel Assembly ($17{\times}17$ KOFA 사용후핵연료집합체내 구조재의 방사선원항 특성 분석)

  • Cho, Dong-Keun;Kook, Dong-Hak;Choi, Heui-Joo;Choi, Jong-Won
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.8 no.4
    • /
    • pp.347-353
    • /
    • 2010
  • Source terms of metal waste comprising a spent fuel assembly are relatively important when the spent fuel is pyroprocessed, because cesium, strontium, and transuranics are not a concern any more in the aspect of source term of permanent disposal. In this study, characteristics of radiation source terms for each structural component in spent fuel assembly was analyzed by using ORIGEN-S with a assumption that 10 metric tons of uranium is pyroprocessed. At first, mass and volume for each structural component of the fuel assembly were calculated in detail. Activation cross section library was generated by using KENO-VI/ORIGEN-S module for top-end piece and bottom-end piece, because those are located at outer core with different neutron spectrum compared to that of inner core. As a result, values of radioactivity, decay heat, and hazard index were reveled to be $1.40{\times}10^{15}$ Bequerels, 236 Watts, $4.34{\times}10^9m^3$-water, respectively, at 10 years after discharge. Those values correspond to 0.7 %, 1.1 %, 0.1 %, respectively, compared to that of spent fuel. Inconel 718 grid plate was shown to be the most important component in the all aspects of radioactivity, decay heat, and hazard index although the mass occupies only 1 % of the total. It was also shown that if the Inconel 718 grid plate is managed separately, the radioactivity and hazard index of metal waste could be decreased to 20~45 % and 30~45 %, respectively. As a whole, decay heat of metal waste was shown to be negligible in the aspect of disposal system design, while the radioactivity and hazard index are important.