• Korean Journal of Food Science and Technology
• /
• 제42권3호
• /
• pp.292-297
• /
• 2010

This study was conducted to determine and compare hardness, thermal properties (by DSC), pasting properties (by RVA) and texture of brown rice and white rice, either lodged or non-lodged, with respect to lodging time. The hardness and the thermal properties of lodged brown rice and white rice decreased with lodging time, while those of nonlodged brown and white rice increased. In addition, the rice kernel hardness and the thermal properties had high correlation coefficients. The pasting properties, with the exception of setback, and the textural properties of lodged brown and white rice decreased with lodging time, while those of non-lodged brown and white rice increased.

• Journal of Digital Policy
• /
• 1권1호
• /
• pp.15-20
• /
• 2022

Recently, the healthcare field is trying to develop a model that can improve service quality by reflecting the requirements of various industrial fields. In this paper, we propose an Internet of Behavior (IoB) environment model that can process users' healthcare information in real time in a 5G environment to improve healthcare services. The purpose of the proposed model is to analyze the user's healthcare information through deep learning and then check the health status in real time. In this case, the biometric information of the user is transmitted through communication equipment attached to the portable medical equipment, and user authentication is performed through information previously input to the attached IoB device. The difference from the existing IoT healthcare service is that it analyzes the user's habits and behavior patterns and converts them into digital data, and it can induce user-specific behaviors to improve the user's healthcare service based on the collected data.

• Korean Journal of Applied Biomechanics
• /
• 제19권1호
• /
• pp.179-186
• /
• 2009

This works studied to compare gas analyzer with accelerometer and the estimation of energy expenditure based on different attaching position of tri-axial accelerometer such as waist and top of the foot Based on the fact that oxygen intake increases more radically linearly during walking more than 8.0km/hr. 9 male subjects performed walking and running on the treadmill with speed of $1.5{\sim}8.5km$/hr and $4.5{\sim}13.0km$/hr, respectively. Commercially available Nike + iPod Sports kit was used to compare energy expenditure with sensor module attached to their foot. Actual energy expenditure was determined by a continuous direct gas analyzer and two multiple regression equations of walking and running mode for different attaching position were developed. Results showed that estimation accuracy of energy expenditure using waist mounted accelerometer was higher than that of the top of the foot and Nike + iPod Sports kit. Results of energy expenditure based on waist and top of the foot showed that the crossover state of energy expenditure occurred at 7.5km/hr. But Nike + iPod Sports kit could not find intersection of energy expenditure in all nine subjects. Therefore the sensor module attached to the waist and separate multi regression equation by walking and running mode was the best to estimate more accurate prediction.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제27권4호
• /
• pp.286-292
• /
• 1991

The authors propose to use the vortex generators in order to improve of the efficiency for the cambered otter boards. The equipments and testing method of this model test was the same as the previous report. This study was tested for 6 models such as the single cambered, the V-shaped cambered and the slotted cambered otter board without and with vortex generators. The results obtained are as follows: \circled1 C sub(L) of the single cambered model otter board with vortex generators was increased about 10% in comparison with that of model without vortex generators, C sub(D) decreased 2%, and L/D increased 5~20%. \circled2 L/D of the V-shaped cambered model otter board with vortex generators was increased 10~20% in comparison with that of model without vortex generators. \circled3 C sub(L) of the two slotted cambered model otter board with vortex generators was increased about 20% within an angle of attack 25$^{\circ}$ in comparison with that of without vortex generators, C sub(D) increased 5~20%, and L/D was higher than prototype within an angle of attack 20$^{\circ}$. \circled4 The separation point of the model otter boards with vortex generators was removed back ward a little in comparison with that of the model without vortex generators. \circled5 Flow speed difference of the back side to the front side of model otter boards with vortex generators was increased a little in comparison with that of the models without vortex generators. \circled6 The size of separation zone in case of the model otter boards with vortex generators was decreased about 10% in comparison with that of the models without vortex generators.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제42권3호
• /
• pp.311-322
• /
• 2022

This study performed 4-point flexural tests of reinforced concrete to which was attached a distributed optical fiber sheet and carbon fiber reinforced polymer (CFRP) sheets in order to assess the effect of the CFRP sheets and the applicability of a BOTDR sensor simultaneously. To evaluate the reinforcing effect, various degrees of CFRP sheet attachment were manufactured, and to evaluate the sensing ability, strains obtained from a BOTDR sensor were compared with strains measured from electric resistance strain gauges that were attached to the concrete surface. From the results, the reinforcing effects were evidently different according to the attachment type of the CFRP sheets, and it was confirmed that the main influencing factor on the reinforcing effect was the type of attachment rather than the attachment area. The reinforced concrete structural behavior was visualized with strains measured from the BOTDR sensor as load increased, and it was identified that load was concentrated in the CFRP reinforced area. Strains from the BOTDR sensor were similar to those from the electric resistance strain gauge; thereby a BOTDR sensor can be effective in the analysis of structural behaviorsof massive infrastructure. Finally, the strain from a BOTDR sensor was high where CFRP sheet fall-off occurs, and it would therefore be efficient to track local damage locations of CFRP sheets by utilizing a BOTDR sensor.

• Journal of the Korean Orthopaedic Association
• /
• 제56권6호
• /
• pp.498-503
• /
• 2021

Purpose: The aim of this study were to find ideal entry point of straight antegrade humeral intramedullary nail (SAHN) for the treatment of proximal humerus fracture in Korean and to analyze anatomical conformity using computed tomography. Materials and Methods: From May 2014 to October 2016, the study was conducted retrospectively on 74 Korean patients who had taken computed tomography on both normal and affected shoulder joint as result of shoulder injury. The mean age of the patients was 64.5 years (range, 22-95 years). Radiologic evaluation was done using multiplanar reconstruction technique of the computer tomography on normal proximal humerus. We located ideal entry point of SAHN as the point where humerus intramedullary center axis and humeral head meet. Distance between the entry point and local anatomical landmark was measured. We defined the critical distance as the distance between entry point and the most medial point of the supraspinatus attachment site. For adequate fixation and avoidance of injury to rotator cuff, critical distance should be over 8 mm according to Euler, and we defined the critical type when it is less than 8 mm. Critical distance, sex, age, height, body weight, body mass index was evaluated for the statistical significance. Results: The ideal entry point was as follows: the mean anteroposterior distance, the sagittal distance to the lateral margin of bicipital groove, was 11.5 mm and the mean mediolateral distance, the coronal distance to the lateral margin of grater tuberosity, was 20.5 mm. The mean critical distance, distance from the entry point to the just medial to insertion of the supraspinatus tendon, was 8.0 mm. Critical type with critical distance less than 8 mm was found in 41 in 74 patients (55.4%). Conclusion: The ideal entry point of SAHN in Korean was located on 11.5 mm posteriorly from the lateral margin of bicipital groove and 20.5 mm medially from lateral margin of greater tuberosity. More than half of the cases were critical type. Since critical type can possibly cause rotate cuff injury during nail insertion on entry point, surgeon should consider anatomical variance before choosing surgical option.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제18권1호
• /
• pp.1-12
• /
• 2005

An analytical procedure to analyze reinforced concrete (RC) beams subject to monotonic loadings is proposed on the basis of the moment-curvature relations of RC sections. Unlike previous analytical models which result the overestimation of stiffnesses and underestimation of structural deformations induced from ignoring the shear deformation and assuming perfect-bond condition between steel and concrete, the proposed relation considers the rigid-body-motion due to anchorage slip at the fixed end. The advantages of the proposed relation, compared with the previous numerical models, are on the promotion in effectiveness of analysis and reflection of influencing factors which must be considered in nonlinear analysis of RC beam by taking into account the nonlinear effects into the simplifying moment-curvature relation. Finally, correlation studies between analytical and experimental results are conducted to establish the applicability of the proposed model to the nonlinear analysis of RC structures.

• 한국해양학회지
• /
• 제22권4호
• /
• pp.257-270
• /
• 1987

Fouling communities developing in Jinhae Harbor and Masan Bay were studied by slide and panel immersion test during the period from Dec., 1982 to Nov., 1983. The total viable count of bacteria was estimated more than 1.7${\times}$ 10$\^$4/CFU/$\textrm{cm}^2$ after 15 days of immersion and 46 taxa of benthic diatoms were classified in micro-community. Progressional change of fouling communities was clearly shown and dominant diatom species are Licmophora flavellata, Navicula grevillei, and Nitzschia closterium Major macrofouling organisms are Mytilus edulis, Balanus amphitrite amphitrite, Hydroides ezoensis, and Celleporina sp. Wet weight production of macrofouling organisms exceeds 500g/100cm$\^$2/ after 5months of immersion. Regional defferences in community development are clearly shown in two study areas, and mainly due to the disparities of physicochemical stability and nutritional status of ambient water. Seasonality of larvae and the growth rate are the important factors in fouling community development. Overall process of community development is as follow : bacteria and diatoms-multicellular algae-barnacle, mussels and polychaete-sponge, anemone and ascidian.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.55-55
• /
• 2011

실리카 지지체 위에 은 (silver) 나노 입자를 부착시키는 방법으로는 지지체 표면을 먼저 은입자와 친화성이 큰 amino(-NH2), mercapto(-SH), cyan(-CN) 등의 관능기로 표면처리 하는 방법이 일반적으로 사용된다. 구체적으로 설명하면 첫 단계로 지지체인 실리카입자의 표면을 아민으로 표면 처리 한다. 실리카 입자위에 부착된 아민관능기는 입자 생성의 단계에서 은 (silver) 나노 입자가 붙는 접촉점의 역할과 핵 생성 장소로서의 역할을 하게되고, 아민 관능기의 이런 역할로 실리카 입자 표면에 부착된 핵이 생장하여 입자가 됨으로써 최종적으로 은(silver) 나노 입자가 실리카 지지체위에 부착된 형태의 나노복합체가 형성된다. 분자량이 다른 PVP를 사용하여 제조한, NH2와 SH로 계면처리 된 은-실리카 나노복합체제조를 시도하였다. 사용되는 PVP의 분자량이 증가함에 따라 긴 고분자 사슬에 의하여 생성된 입체장애가 증가하게 되어, 은 핵의 성장에 대한 물리적 장벽이 증가하게 된다. 그러므로 고정화된 은 입자의 크기가 감소하게 된다. 이러한 형상은 NH2기 또는 SH기로 계면 처리된 실리카를 이용하여 제조된 은-실리카 나노복합체 입자들에서 모두 관찰되지만, SH기로 계면처리된 실리카를 사용할 경우 고정화된 은 입자의 수가 더욱 많고, 크기 역시 더욱 균일함을 알 수 있다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제6권4호
• /
• pp.52-66
• /
• 2003

Generally we have difficulty in removing oil using mechanical devices because recovery rate and recovery efficiency decrease remarkably when operating in thin oil films or in oils of very high viscosity In the Present study a series of experiments were carried out to study the effect of operating conditions on the rate of recovery for the spilled oil using a drum type skimmer. For each set of experiments depth of immersion, oil film thickness and the circumferential speeds were varied systematically to find the effects on the recovery rate. The results shows that recovery rate is dependent on the contact angle for the depth of immersion and the highest rate of oil recovery shows in the case of a contact angle of 45°(h/d=0.15). For the removal of spilled oil the optimal circumferential speed can be found as the critical value to reach the saturated recovery rate for a given oil film thickness and depth of immersion. Even in thin oil thickness we have enough recovery rate and recovery efficiency within critical circumferential speed this way.