Journal of Korean Society of Environmental Engineers
/
v.29
no.7
/
pp.833-838
/
2007
In this study, adhesion and transport of bacteria in positively-charged media was investigated with batch and column experiments. Bacterial species used in this study was Escherichia coli ATCC 11105(length: 2.2 ${\mu}m$, diameter: 0.6 ${\mu}m$) and media used were quartz sand(particle size distribution: 0.5-2.0 mm, mean diameter: 1.0 mm) and iron-coated sand. Batch results indicate that bacterial adhesion increased as the content of iron-coated media increased. At iron-coated media 0%(quartz sand 100%), around 46% of bacteria was adhered to media while at iron-coated media 100%(quartz sand 0%) about 97% was attached. Column results also show that bacterial adhesion was enhanced with an increase of iron-coated media content. As the iron-coated media content increased from 0 to 100%, bacterial adhesion increased from 8 to 94%. The experimental results demonstrate that positively-charged media could influence transport of bacteria in porous media.
Kim, Kwang Soo;Park, Hyun Chul;Jun, Tae Hwan;Lee, Ju Haeng;Kim, Il Ho
Journal of Korean Society of Environmental Engineers
/
v.35
no.10
/
pp.749-755
/
2013
The purposes of this research are to know the optimal gab and electric pressure (voltage) of electrode-plates coated with activated carbon and also to study their arrangement through dust removal efficiency. From the experimental results of attached dust mass at different electrode-plate gab, the frequency of attachment and detachment of dust was more increased as electrode-plate gab was closer. In attached dust mass per unit area of electrode-plate, the farther electrode gab, the more increased. But in total attached dust mass, the closer electrode gab, the more removed. From the experimental results, the optimal electrode arrangement in dust removal chamber was considered that the forward parts of chamber need to be increased the number of electrode-plate, the backward parts to be increased them. The dust attachment have no relation with electric pressure while showing high removal efficiency under condition of 5 kV of voltage and 2 cm of electrode-plates gab.
Journal of the Korean Society of Clothing and Textiles
/
v.27
no.12
/
pp.1368-1373
/
2003
본 연구에서는 견직물에 강경한 촉감을 부여하여 한복지 뿐만 아니라 현대의 패션경향에도 부합되는 소재를 개발하고자 하였다. 견직물에 강경성을 부여하기 위하여 의마가공용 폴리우레탄 수지를 이용하여 수지농도와 큐어링온도에 따른 수지부착율을 조사하였고, 여기에 수반되는 물리적 특성의 변화를 살펴보았다. 또한 가공된 견직물의 세탁에 대한 내구성도 살펴보아 동시에 실용가능성도 검토하였다. 이상의 연구를 통해 다음과 같은 결과를 얻었다. 1. 의마가공용 폴리우레탄 수지를 견직물에 처리할 경우 수지 농도가 증가할수록 수지 부착량이 증가하였다. 2. 열처리온도를 변화시켜 수지부착량의 변화를 살펴본 결과 열처리 온도가 증가할수록 수지의 부착량이 감소하여 본 실험에 사용된 수지의 적정 열처리 온도가 160-18$0^{\circ}C$인 것을 고려해 볼 때 견직물의 경우 17$0^{\circ}C$의 열처리 온도가 적절한 것으로 나타났다. 3. 수지 처리된 견직물의 역학적 특성치의 변화를 살펴본 결과 RT, EM, MIU값은 감소하는 경향을 가지며, LT, B, 2HB, G, 2HG, 2HG5값은 증가하는 경향을 나타내어 폴리우레탄 수지처리로 의마가공 효과를 갖는 견직물을 얻을 수 있었다. 4. 수지 처리된 견직물의 역학적 특성치는 물세탁 후에도 크게 변화가 없어 세탁에 대한 내구성을 지니고 있는 것으로 나타났다.
Kim, Tae-Kyung;Ryu, Seo-Young;Park, Yoon-A;Lee, Jong-Jun;Joo, Kwang-Jin;Chang, Kwang-Hyeon;Oh, Jong-Min
Journal of Environmental Impact Assessment
/
v.27
no.6
/
pp.595-603
/
2018
This study was conducted to understand the growth of attached microbial community in small and medium streams of Gyeonggi-do and the removal efficiency of fluoride with changes in growth. The sites monitoring were carried out for 12 weeks at the P1 and P2(P1 is the point where the discharge water flows. P2 is the downstream point of about 2 km flow), and investigated the water quality and the biomass analysis of the attached microbial community. The growth of the attached microbial community increased up to the 7th investigation, and it was observed that detachment phenomenon occurred. Influencing factors about growth of the attached microbial community were flow rate, velocity, and organic material(T-N & T-P). Meanwhile, fluoride content of attached microbial community also tended to increase until the 7th investigation, and decrease from the 8th. It is assumed that fluoride content has also be reduced with the detachment phenomenon of the attached microbial community. It is expected that this will contribute to the evaluation and management of the use of attached microbial community as a means of stream management. The application of techniques using the attached microbial community should include basic investigation of factors that may affect the growth of the attached microbial community and replacement of the attachment plate according to the time of removal.
In this paper, an experimental investigation of bond properties between steel fiber reinforced concrete and glass fiber reinforced polymer reinforcements was performed. The experimental variables were diameter of reinforcements, volume fraction of steel fiber, cover thickness and compressive strength of concrete. Bond failure mainly occurred with splitting of concrete cover. Main factor for splitting of concrete is tension force occurred by the displacement difference between reinforcements and concrete. Therefore, in order to prevent the bond failure between reinforcements and concrete, capacity of tensile strength of concrete cover should be upgraded. As a results of test, volume fraction of steel fiber significantly increases the bond strength. Cover thickness changes the failure mode. Diameter of reinforcements also changes the failure mode. Generally, diameter of reinforcement also affects the bond properties but this effect is not significant as volume fraction of fiber. Increase of compressive strength increases the bond strength between concrete and reinforcement because compressive strength of concrete directly affects the tensile strength of concrete.
Kim, Dong-Yong;Bae, Gwang-Jin;Kim, Jong-Gu;Ju, Jae-Hun;Jo, Yeong-Rae
Proceedings of the Korean Vacuum Society Conference
/
2015.08a
/
pp.110-110
/
2015
표면에너지는 계면특성을 지배하는 핵심인자로 디스플레이의 터치 스크린 패널 공정, 이종소재의 접합, 금속의 클래딩 등 실제 산업에 있어서 매우 중요하다. 표면에너지는 코팅과 본딩 이론에 있어서 기본이 되는 물리량으로 표면에너지가 높을수록 코팅 또는 박막 증착시 코팅, 증착이 용이하며 이종소재의 접합도 쉽게 일어난다. 본 연구에서는 플라즈마 표면처리시 산소 분율의 변화에 따른 기판의 표면에너지와 코팅층과 기판의 부착력의 변화에 대해 연구하였다. 연구의 주요 기판으로 ITO, PET 기판을 사용하였고, 표면 에너지 변화를 확인하기 위해 기판을 상온 상압 플라즈마에 노출시켰다. 플라즈마는 아르곤(Ar)의 공급량을 20 LPM으로 고정하고 산소($O_2$)의 공급량을 0 sccm에서 40 sccm 까지 10 sccm 간격으로 변수를 주었다. 표면에너지 값은 기판 위에 형성된 액체의 접촉각을 통해 도출하였다. 표면에너지 측정 액체로 증류수(deionized water)와 디오도메탄(diiodo-methane)을 사용하였다. 표면에너지는 산소분압이 10 sccm에서 최대값인 76 mJ/m2으로 증가한 후 20 sccm까지 유지하다 다시 직선적으로 감소하였다. 기판에 증착된 크롬 박막의 부착력은 스크래치 테스트를 통해 측정하였다. 표면에너지의 증가와 비례하게 부착력은 증가하였고 표면에너지가 감소하는 범위에서는 부착력도 감소하였다. 기판과 코팅층의 부착력 증가 원인 중 하나인 계면 산화물 층의 생성 여부를 알아보기 위해 auger electron spectroscopy (AES) 분석을 진행하였다. AES 분석을 통해 플라즈마 표면처리시 기판과 코팅층의 계면 산화물층의 두께가 표면에너지의 변화와 비례하게 증가하였다가 감소하는 것을 확인하였다. 산소분압이 10 sccm 이었을 경우 산화물층의 두께가 가장 두꺼웠다. 또한 계면의 화학적 결합 상태를 알아보기 위해 X-ray photoelectron spectroscopy (XPS) 분석을 진행하였으며 산소 분율의 변화에 따라 크롬 산화물의 양이 증가하였다 감소하는것을 확인하였다. 이 연구를 통해 산소를 포함한 플라즈마 표면개질이 기판과 코팅층의 부착력 증가에 영향을 끼침을 확인 할 수 있었다. 또한 이를 응용하여 부착력 증가가 필요한 다양한 분야에서도 쉽게 적용시킬 수 있을 것이다.
Though steel reinforcing bars are the most widely used tensile reinforcement, corrosion problems are encountered due to the exposure to aggressive environments. As an alternative material to steel, the fiber reinforced polymers have been used as reinforcement in concrete structures. However, bond strength of FRP rebar is relatively low compared to steel rebar. It has been reported that fibers in matrix can resist crack growth, propagation and finally result in an increase of toughness. In this study, high-strength concrete reinforced with structural fibers was produced to enhance interfacial bond behavior between FRP rebar and concrete matrix. The interfacial bond-behaviors were investigated from a direct pullout test. The test variables were surface conditions of GFRP bars and fiber types. Total of 54 pullout specimens with three different types of bars were cast for bond strength tests. The bond strength-slip responses and resistance of the bond failure were evaluated. The test results showed that the bond strength and toughness increased according to the increased fiber volume.
The relationships among total epiphytes, algal epiphytes and eelgrass ($Zostera$$marina$ L.) were studied at eelgrass medows from July, 1998 to July, 1999 in Yulim-ri, Yeosu, Korea. Epiphytic diatoms on eelgrass leaves were observed from July to December 1998. From the results of this study, we inferred the following three (3) conclusions : 1) As eelgrass grew older, biomass of epiphytes increased, according to relationships between the leaf length and area of eelgrass and biomass (DW, AFDW and Chl. $a$) of epiphytes. 2) According to the ratio of dry weight, ash-free dry weight and Chlorophyll of epiphytes, the algae with calcareous or siliceous skeletons, such as coralline algae or diatoms, were dominated in the epitphytic algae community. 3) The autotrophic index (AI) calculated from AFDW and Chl. $a$ of epiphytes varied from 151 to 375. However, the period of autotrophic community was shorter than heterotrophic community and the value of AI was high. From these results, we inferred that heterotrophic community, including detritus or microorganisms were dominated in the most of research period.
Journal of the Korean Society of Marine Environment & Safety
/
v.15
no.3
/
pp.173-177
/
2009
A total of 3 epiphytic macroalgae were collected from eelgrass bed in Jindong Bay, and Scytosiphon lomentaria and Colpomenia sp. in Phaephyta, Gracilaria sp. in Rhodophyta occurred during study periods. For epiphytic microalgae (diatoms), Cocconeis scutellum and Cocconeis placentula were common species. Seasonal variations of epiphytic algal biomass were marked: the higher epiphytic macroalgae was 3.3 g $DW/m^2$ in November 2003; whereas epiphytic diatoms were 43,153 $cells/m^2$ in June 2003. Diversity and number of epiphytic macroalgae species were the lowest in the study area, compared with those of in other areas such as Koongyang Bay, Dongdae Bay, and Aenggang Bay. These results were therefore likely due to the severe physical characteristics of the intertidal mudflat eelgrass biological characteristics, and the deterioration of water quality.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.