• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.4
• /
• pp.296-305
• /
• 2013

For the purpose of evaluating the prevalence of malocclusion and self-esteem in adolescents, 1,380 middle-school students in the Yangsan area were surveyed by oral examination and questionnaires and the obtained results were as follows: The distribution of 1st molar occlusion by Angle's classification was 69.0, 19.4, 10.6% for Class I, II and III respectively. In the horizontal relationship, the prevalence of normal overjet and crossbite was 86.9% and 5.6% respectively whereas larger and extremely larger overjet was found in 6.6% and 0.8%. In the vertical relationship of anterior teeth, normal, deep overbite and openbite was shown in 94.1%, 4.7%, and 1.2%. For the midline discrepancy, the distribution of groups with 0~1 mm, 2~4 mm and over 5 mm was 98.2%, 1.4%, and 0.4%. Crowding only in the maxilla was found in 9.6%, while that only in the mandible and in both arches was 14.1% and 24.1% respectively. Spacing only in the maxilla was seen in 3.0%, while that only in the mandible and in both arches was 2.4% and 1.7% respectively. Significant difference in self-esteem was revealed in female and malocclusion groups of crossbite and openbite(p < 0.05).

• Korean Journal of Culture and Social Issue
• /
• v.20 no.4
• /
• pp.347-364
• /
• 2014

The present study was conducted to investigate how emotional expression change, test delay, and background influence on face recognition. In experiment 1, participants were presented with negative faces at study phase and administered for standard old-new recognition test including targets of negative and neutral expression for the same faces. In experiment 2, participants were studied negative faces and tested by old-new face recognition test with targets of negative and positive faces. In experiment 3, participants were presented with neutral faces at study phase and had to identify the same faces with no regard for negative and neutral expression at face recognition test. In all three experiments, participants were assigned into either immediate test or delay test, and target faces were presented in both white and black background. Results of experiments 1 and 2 indicated higher rates for negative faces than neutral or positive faces. Facial expression consistency enhanced face recognition memory. In experiment 3, the superiority of facial expression consistency were demonstrated by higher rates for neutral faces at recognition test. If facial expressions were consistent across encoding and retrieval, memory performance on face recognition were enhanced in all three experiments. And the effect of facial expression change have different effects on background conditions. The findings suggest that facial expression change make face identification hard, and time and background also affect on face recognition.

• Journal of Korean Medical classics
• /
• v.18 no.4 s.31
• /
• pp.15-26
• /
• 2005

통과연구(通過硏究)${\ulcorner}$의학입문(醫學入門)${\lrcorner}$중대어삼음삼양각자이육기배속원리(中對於三陰三陽各自以六氣配屬原理), 육기납지(六氣納支), 절기방위(節氣方位), 표본음양속성(標本陰陽屬性), 경맥납지(經脈納支), 맥체(脈體), 치법(治法), 중기등진행분류급고찰(中氣等進行分類及考察), 득출결론여하(得出結論如下) : 1. 삼음삼양적속성여지지적배속불일치(三陰三陽的屬性與地支的配屬不一致). 태양화궐음수연이지지여진술화사해(太陽和厥陰雖然以地支與辰戌和巳亥), 인신상배속(寅申相配屬), 단시실제상표본적음양속성여납지적원리시부동적(但是實際上標本的陰陽屬性與納支的原理是不同的). 인차(因此), 재구별표본음양적특성상(在區別標本陰陽的特性上), 절기(節氣), 방위등불능성위일정기준(方位等不能成爲一定基準). 2. 삼음삼양본기적오행속성화경맥납지(三陰三陽本氣的五行屬性和經脈納支), 유가능불일치(有可能不一致). 양명조금지본(陽明操金之本), 불시수양명대장(不是手陽明大腸), 실제상족양명위재시본(實際上足陽明胃才是本), 소양상화지본(少陽相火之本), 역불시수소양삼초(亦不是手少陽三焦), 실제상족소양담재본(實際上足少陽膽才本). 3. 삼음삼양안조종화규율기치법각이(三陰三陽按照從化規律其治法各異). 제일(第一), 표여본적음양속성상반시용반치법(標與本的陰陽屬性相反時用反治法). 소음본열표한(少陰本熱標寒), 태양본한표열(太陽本寒標熱), 차한열부정(且寒熱不定), 고태양열인한용(故太陽熱因寒用), 이소음한인열용(而少陰寒因熱用). 제이(第二), 표여본적음양속성상동시용정치법(標與本的陰陽屬性相同時用正治法). 태음표본균한(太陰標本均寒), 소양표본균열(少陽標本均熱), 고태음한인한용(故太陰寒因寒用), 색인색용(塞因塞用), 이소양통인통용(而少陽通因通用). 제삼(第三), 표여본적음양속성상반(標與本的陰陽屬性相反), 차여중기적음양속성부동시(且與中氣的陰陽屬性不同時), 불능용정치혹반치법(不能用正治或反治法), 응구종어중진행치료(應驅從於中進行治療). 즉불능구니어궐음화양명적소정치법(卽不能拘泥於厥陰和陽明的所定治法), 응수기종중진행치료(應隨機從中進行治療). 4. ‘소음태양(少陰太陽) 종본종표(從本從標)’ 재응용어치료시(在應用於治療時), 가해석여하(可解釋如下): 제일(第一), 혹자종본(或者從本), 혹자종표(或者從標). 제이(第二), 혹자종본(或者從本), 혹자종표(或者從標), 단치료상유기선후지별(但治療上有其先後之別). 제삼(第三), 소음한인열용(少陰寒因熱用). 태양열인한용(太陽熱因寒用), 고동시구종어표본(故同時驅從於標本). 5. 재(在)‘양명궐음(陽明厥陰) 부종표본(不從標本) 종호중(從乎中)’적(的)‘종호중(從乎中)’, 가이해위재치법운용중가이(可理解爲在治法運用中可以)‘수기취중(隨機取中)’지의(之意).

• Journal of the Korean Society of Radiology
• /
• v.10 no.4
• /
• pp.285-290
• /
• 2016

The purpose of our study was to retrospectively evaluate the cause of a decreased calcium score of follow-up studies on coronary artery calcium scores (CACs) computed tomography (CT). The subjects were healthy 100 people(85 males $60.6{\pm}6.9$ years, 15 females $67.2{\pm}7.3$ years). The subjects decreased CACs were divided into 4 subgroups depending on Agatston classification, minimal (1-10), mild (11-100), moderate (101-400), severe (400<). As a result of decreased CACs were scan location disagreement 51%, motion artifact 26%, equipment changes 14%, operator mistakes 5%, input miss 2%, image loss 1%, arrhythmia 1%. In the mild group, the most common decreased CACs were 49 people. In the minimal group, the most significant variation reduction has occurred to 6 people. Scan location disagreement was considered a partial volume effects due to the scan starting position. It showed less than 100 CACs a high variation (19.7%) in more than 100 CACs, a lower variation (2.2%), these could be seen that the variation range is different that can be tolerated according to the calcification score. Motion artifact factor was found in 26%, which is so closely related to the preceding tests that affect the higher heart rate like this pulmonary function test, exercise stress test.

• Korean Journal of Cognitive Science
• /
• v.20 no.1
• /
• pp.51-77
• /
• 2009

Using a modified Posner's cue-target paradigm, we investigated whether negative cues attract more attention than neutral cues in anxious people. Previous studies used commonly an unbalanced proportion of valid and invalid trials(75% vs. 25% respectively). But in the present study, an equivalent proportion of valid and invalids trials was used for measuring detection speed of cues without participant's expectancy caused by the unbalanced proportion. Emotional words(Experiment 1) and facial expressions(Experiment 2) were used as cues for target locations. The result of Experiment 1 and 2 showed that threatening cues facilitated target detection in valid trials and interfered with it in invalid trials in anxious participants and a, reverse response patterns were found in non-anxious participants. This indicates that threatening cues attract more attention to the cued location in anxious people and in contrast, non-anxious people avoid threatening stimuli. In Experiment 3, we investigated the difference of validity effect across anxiety levels. The results showed that anxious participants gave less attention to cued location when the cues were non-informative whereas non-anxious participants gave more attention to cued locations in the same condition. We discussed two kinds of cognitive bias caused by anxiety levels: attentional bias and proportion related bias.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.39-47
• /
• 2012

The opinion of user on a certain product is expressed in positive/negative sentiments for specific features of it. In some cases, they are expressed for a holistic part of homogeneous specific features, or expressed for product itself. Therefore, in the area of opinion mining, name of opinion features to be extracted are specific feature names, holonyms for theses specific features, and product names. However, when the opinion target is described with product name or holonym, sometimes it may not match feature name of opinion sentence to true opinion target intended by the reviewer. In this paper, we present a method to extract opinion targets from opinion sentences. Most importantly, we propose a method to extract true target from the feature names mismatched to a intended target. First, we extract candidate opinion pairs using dependency relation between words, and then select feature names frequently mismatched to opinion target. Each selected opinion feature name is replaced to a specific feature intended by the reviewer. Finally, in order to extract relevant opinion features from the whole candidate opinion pairs including modified opinion feature names, candidate opinion pairs are rearranged by the order of user's interest.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.444-444
• /
• 2013

변형 다중양자우물은 전자 소자와 광전자 소자에 응용할 수 있는 가능성 때문에 연구가 많이 진행되고 있다. 합성 물질들의 초격자를 연속적으로 증착, 성장하는 디지털 합금은 다중양자우물을 활용한 광전자 소자에서 응용가치가 상당히 높다. 현재 디지털 합금을 이용한 다중양자우물의 성장과 관련한 연구가 활발히 진행되고 있고, 특히 InzGaxAl1-z-xP/InAlP 다중양자우물은 광전자 소자로서의 응용가치가 부각되고 있다. 그러나 InzGaxAl1-z-xP/InAlP 다중양자우물의 성장 및 광학적 성질에 대한 연구는 많이 진행되었으나, InzGaxAl1-z-xP/InAlP 다중양자우물에서의 변형효과를 고려한 전자적 성질에 대한 연구는 미흡하다. InzGaxAl1-z-xP/InAlP 다중양자우물에 대한 전자적 성질의 연구는 광소자의 성능 향상을 위해 매우 필요하다. 본 연구에서는 디지털 합금 성장 방법으로 형성한 InzGaxAl1-z-xP/InAlP 다중양자우물의 부띠 사이 천이와 전자 분포를 고찰하였다. 온도에 따른 광루미네센스의 측정을 통해 InzGaxAl1-z-xP/InAlP 다중양자우물에서 나타나는 부띠 사이의 천이를 관찰하였다. 가변 메시 유한 차분법을 이용한 이산적 모델을 통해 변형효과가 다중양자우물 구조에서 부띠에 주는 영향을 조사하였다. 격자의 불일치로 인한 변형 효과와 8-band envelope function approximation을 고려한 슈뢰딩거 방정식을 사용하여 InzGaxAl1-z-xP/InAlP 다중양자우물에서의 전자 부띠 에너지와 에너지 파동 함수를 계산하였다. 계산한 부띠 사이 천이 에너지와 광루미네센스 측정에서 보인 엑시톤 천이 에너지를 비교하였을 때, 작은 차이 값이 나타났다. 증착과정에서의 이종접합사이에서 발생하는 불확실성을 고려한다면 이 차이 값은 오차범위 안에 포함되며, 계산 값과 실험 값이 잘 일치하는 것으로 볼 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.2
• /
• pp.113-121
• /
• 2005

In order to resolve a common numerical integration inaccuracy of meshfree methods, we introduce an improved natural clement method called Petrov-Galerkin natural element method(PG-NEM). While Laplace basis function is being taken for the trial shape function, the test shape function in the present method is differently defined such that its support becomes a union of Delaunay triangles. This approach eliminates the inconsistency of tile support of integrand function with the regular integration domain, and which preserves both simplicity and accuracy in the numerical integration. In this paper, the validity of the PG-NEM is verified through the representative benchmark problems in 2-d linear elasticity. For the comparison, we also analyze the problems using the conventional Bubnov-Galerkin natural element method(BG-NEM) and constant strain finite clement method(CS-FEM). From the patch test and assessment on convergence rate, we can confirm the superiority of the proposed meshfree method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1179-1183
• /
• 2007

관망 내에서 흐름의 연속 방정식과 운동량 방정식을 상 미분으로 전개하여 해석한 특성선 방법은 주로 가압 관망체계(Pressurized Pipeline System)에서의 부정류 해석(Unsteady Analysis)에 사용 된다. 그러나 이특성선 방법은 천이류 해석을 위한 관망 재구성 과정에서 Courant수 조건의 만족을 위한 관의 재배열에 천문학적인 계산용량과 시간이 필요하다는 단점이 있다. 이는 현장 적용 시 압력파 전파속도의 불확실성과 연계되어 상당한 장해요소가 되고 있다. 이에 대안적인 방법으로서 임펄스응답법이 개발되었다. 이는 경계지점에서 복소수 유량에 대한 복소수 수두의 비율로써 정의된 관망에서의 수리임피던스를 역퓨리에 변환에 적용하여, 주파수 영역의 수치를 시간 영역으로 변환하여 응답함수를 산출한 후, 산출된 응답함수와 구해진 경계지점에서의 유량과의 적분을 통하여 임의의 지점에서의 수두 및 유량을 계산하는 방법이다. 임펄스 응답법은 관 부속물관의 특성을 기술하는 수학적 표현의 난해함으로 인해 지금까지는 단일관에 대한 연구에만 국한되어 왔다. 본 연구에서는 임펄스응답법을 수리구조물이 부착된 관망에 적용하여 다양한 조건에서 천이류 분석을 시행하였다. 즉, 에어챔버 및 서지탱크와 같은 수리구조물을 각각에 대한 수리임피던스를 구하고, 가지관 및 통합 관성항으로 취급하여 수리구조물을 처리하였다. 그리고 이러한 결과를 특성선방법과 비교하여 그 적절성을 검증하였는데, 특성선 방법에 의한 모의 결과와 비교하였을 때, 일치하는 결과를 나타내었다. 임펄스응답법에 의한 모의 결과에서 감쇄효과를 과대평가하는 경향이 관찰되었다. 이는 임펄스 응답법의 가정에 기인한 것으로써 난류 상태의 흐름에서 상당한 불일치를 가져올 수 있으나, 수리 구조물에 의한 수격압이 감쇄되는 과정에서 대부분 흐름이 층류 상태로 전환된다고 가정 할 때는 상당한 적용성이 있다. 본 연구는 수리구조물이 부착된 관망의 해석함에 있어서 임펄스응답법의 적용이 가능함을 보였고, 이는 보다 복잡한 관망에서의 천이류 해석이 가능함을 시사한다.

• The KIPS Transactions:PartD
• /
• v.15D no.4
• /
• pp.505-512
• /
• 2008

In order to do requirement-based testing of embedded system, we must have correct requirement specifications. But, natural language requirements of a client have ambiguity, inaccuracy, and inconsistency. To solve these problems, natural language requirements are modeled with modeling language such as UML and Simulink. During a modeling phase, the requirements are rearranged and retranslated in use-case. These activities are disadvantages of modeling. In this paper, we propose the technique, which is how to model a embedded system requirement into a model without rearranging and retranslating. This technique 1) represent a embedded system requirement with graphical language, and 2) model a requirement into a model. Because this technique only describes "what-to-do" of the requirement, this technique is useful to not only the low-level requirements but also the high-level requirements. We show some example systems modeled by REED, which has adopted this technique.