• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.35-43
• /
• 2017

The minimum reinforcement ratio is an important design factor to prevent a brittle failure in RC flexural members. A minimum reinforcement ratio is presented by assuming an effective depth of cross-section and moment arm lever in CDC and KHBDC. In this study, it suggests that a rational method for minimum reinforcement ratio is calculated by material model and force equilibrium. As results, a minimum reinforcement ratio using a p-r curve in KHBDC is evaluated about 52~80% of recent design code's value and it induces an economical design. And also, a ductility capacity in case of placing this minimum reinforcement amount is evaluated about 89% of recent design code's value, but ductility in a member is 7 or more, so it has a sufficient ductility capacity. Therefore, it is judged that a minimum reinforcement ratio using p-r curve has a theoretical rationality, safety and economy in a flexural member design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.285-285
• /
• 2015

댐 및 저수지 시설물은 노후화나 안전성 미확보로 인한 파손 또는 붕괴 발생 시 하류부에 막대한 인명과 재산피해 등 치명적인 결과를 초래하게 된다. 이러한 대형 안전사고를 예방하고자 시설물의 안전관리에 관한 특별법에서는 댐 시설물을 규모별로 1, 2종 시설물로 구분하고, 이에 대해 주기적으로 안전점검 및 정밀안전진단을 실시하도록 제도화하는 한편 진단 결과에 따라 보수 보강 등의 안전조치를 의무화하고 있다. 구조물 결함에 따른 보수 보강은 보수재료와 공법 선정시 공법의 적용성, 구조적 안전성, 경제성 등을 종합적으로 검토하여 결정하여야 한다. 손상 부위에 대한 보수 보강은 제한된 예산과 인력을 효율적으로 투자하기 위해 보수재료 및 공법의 선정 뿐만 아니라 보수 보강이 이루어져야 하는 부재에 대한 우선순위를 산정하는 것이 최우선적으로 선행되어야 한다. 안전점검 및 정밀안전진단 세부지침에서는 보수 보강 대책 마련 시안전점검 및 정밀안전진단 결과를 기초로 하여 적정 재료 및 공법을 선정하고, 보수 보강의 수준 및 우선순위를 결정하도록 명시되어 있다. 하지만 우선순위 결정에 대한 가이드라인이 부재하여 불필요한 시공과 비효율적인 예산 투입으로 인해 국가예산의 낭비되고 시설물의 안전까지 위협받게 되는 경우가 발생하고 있다. 따라서 본 연구에서는 시설물의 상태에 따른 적절한 보수 보강 필요성을 판단하고 보수 보강 수준 및 우선순위를 결정하기 위한 방법론을 개발하였다. 댐 시설물에 대한 안전점검 및 정밀안전진단의 종합평가는 평가대상 개별시설에 대하여 상태 평가 및 안전성 평가를 실시한 후 그 결과에 의해 산출된 상태평가지수와 안전성평가지수를 비교하여 평가단계별로 그 결과를 취합하여 종합평가를 실시하고 있다. 따라서 상태평가에 의해 산정된 종합평가 결과를 이용하여 개별 부재의 상태평가값 산정을 위해 하부 단계의 가중치 및 평가 지수 역산하고, 재산정된 가중치 및 평가지수를 이용하여 각 부재에 대한 보수 보강 우선순위를 산정하고자 하였다. 개발된 방법론은 점검 진단 책임기술자 및 시설물 관리주체 담당자가 댐 시설물의 개별부재에 대한 보수 보강 실시 여부를 판정할 수 있는 기준으로, 보수 보강에 대한 정책 결정시 경제성을 고려한 신뢰도 있는 기준으로 활용될 수 있을 것으로 기대된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.5
• /
• pp.134-140
• /
• 2017

In this study, the flexural behavior of high strength concrete members with different curing condition of 90 MPa of compressive strength was investigated. Experimental parameters included normal and low temperature curing conditions, tensile steel amount and concrete compressive strength. 8 beam members were fabricated and flexural tests were carried out. Crack spacing, load-deflection relation, load-strain relation and ductility index were determined. Experimental results show that as the amount of rebar increases, the number of cracks increases and the crack spacing decreases. The higher the concrete strength, the smaller the number of cracks, but the effect is significantly smaller than the amount of rebar. As a result of comparison with the proposed average crack spacing in the design criteria, the experimental results are slightly larger than the results of the proposed formula, but the proposed formula does not reflect the concrete strength and curing conditions. The ductility index of normal temperature cured members was 3.36~6.74 and the ductility index of low temperature cured members was 1.51~2.82. The behavior of low temperature cured members was found to be lower than that of normal temperature cured members. As a result of comparing the ductility index with the existing studies similar to the experimental members, the ductility index of the high strength concrete member was larger than the ductility index of the ordinary strength concrete of the previous study. Further research is needed to understand more specific results.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.106-115
• /
• 2011

This study proposed a new methodology for seismic capacity evaluation of low-rise reinforced concrete (RC) buildings based on non-linear required spectrum. In order to verify the reliability of the proposed method, relationships between results obtained using the proposed method and the non-linear dynamic analyses were investigated. Compared with the seismic protection index (Es=0.6) defined in the Japanese Standard, the applicability of the method was also estimated. Research results indicate that the method proposed in this study compares reasonably well with the detailed evaluation methods. Using the seismic evaluation method developed in this study, the seismic capacity category and earthquake damage degree of low-rise RC buildings corresponding to a specific earthquake level can be effectively estimated.

• Magazine of the Korea Concrete Institute
• /
• v.1 no.2
• /
• pp.93-100
• /
• 1989

철근콘크리트부재의 강도는 여러 가지 요인으로 인하여 변이를 보이고 있다. 주요 요인들은 콘크리트나 철근의 강도 및 역학적 특성의 변이, 시공오차등이다. 이들중 콘크리트의 강도는 상대적으로 높은 불확실성을 가지며, 다양한 요인(배합, 운반, 타설, 양생등)에 의해 변화정도가 영향을 받는다. 본 연구에서는 국내 철근콘크리트 구조물이 가지는 신뢰도의 수준을 분석하기 위한 기초자료 조사로서, 현장에서 타설되는 콘크리트를 설계강도별로 직접채취하여 습윤양생과 현장조건양생을 통하여 콘크리트의 28일 압축강도의 확률적 특성을 분석하였다. 분석된 결과를 이용하여 현장타설 부재내에서의 콘크리트의 압축강도를 추정하였다.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.249-259
• /
• 2011

In this study, the distortional behaviors of tub-section steel girders subjected to torsional loading were analyzed, and predictor equations were developed for estimating the member forces induced in the internal bracing system installed in the steel tub girders. Torsional loadings originated either by eccentric vertical loading or girder curvature were decomposed into the pure torsional force component that does not affect the distortional box deformation, and into the distortional force component that directly induces box distortion. The axial member forces induced in the internal cross frames were formulated as a function of the magnitude of torsional loading through the analytical investigation of the interactions between the distortional force component and internal cross frames. To verify the proposed equations, three-dimensional finite element analysis (3D FEA) was conducted for the straight simple-span girder and the three-span continuous girder samples. Very good agreement was found between the member forces from the FEA and the proposed equations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1707-1721
• /
• 2014

Half-depth panels were developed with the merits of CIP (Cast In Place) decks and precast decks for constructability and fast construction. In this paper, details of half-depth panels with pre-tensioning were suggested. For evaluation of structural performance, five half-depth panel specimens were fabricated and static tests were conducted. The cross-sections of these specimens were composed of pre-tensioned half-depth panels and pre-tensioned two-span half-depth panels. Test parameters were the amount of the prestressing force and the longitudinal reinforcements. Static tests on simply-supported slabs showed that ultimate strength was 1.55 times greater than calculated nominal strength. The flexural strength was only 10 % increased and the influence on crack width control was negligible when the member of tendons was increased twice. For two-span continuous specimens, the ultimate strength increased 1.2 times and 1.38 times respectively as the reinforcement was additionally provided. The verified half-depth panels by this research can be effectively utilized for the fast replacement or construction of bridges.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1306-1312
• /
• 2000

This study was conducted to examine the effects of levels of flavoring materials on the sensory characteristics of chicken feet Jokpyun (Korean traditional gel type food) and to determine the optimum levels. Consumer desirability of Jokpyun flavored with different levels of black pepper and ginger was evaluated. Optimum levels of variables were obtained using response surface methodology. The levels were 0.33% and 0.1% for black pepper and ginger extract, respectively. The shelf-life of the optimized Jokpyun at $4^{\circ}C$ was determined as 6 days. Addition of powdered chicken broth in the Jokpyun preparation at the level of 1.5%(w/w) markedly increased boiled chicken flavor without resulting in undesirable properties.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.205-215
• /
• 2017

This study presents an example of conceptual design for hollow circular section multi-column tower system subjected to 10MW level wind load by introducing a method based on member utilization that examine both structural stability and economical efficiency. The basic assumptions for the proto type of a multi-column tower that can replace a single-cylinder tower were suggested and structural models were constructed following the assumptions and analyzed for identifying member forces. Based on the calculated member strengths and acting loads, the member utilization of the proposed multi-column tower structures were calculated for axial force, shear, bending and torsion and evaluaed for suitability as a wind tower. Design parameters such as steel tube dimensions, slenderness ratio, and number of floors for braces was proposed in the acceptable range of member utilization for conceptual design of multi-column wind towers.

• Korean Journal of Childcare and Education
• /
• v.6 no.1
• /
• pp.1-21
• /
• 2010

This study examined Korean immigrant elderly's generativity and care-giving experiences of their grandchildren according to their level of generativity. In-depth interview and participant observation method were used. First, this study used Loyola Generativity Scale in order to find Korean immigrant elderly's generativity level. 4 grandparents were selected as a group of low generativity level and 4 grandparents as high level. Grandparents with low generativity level showed non-voluntary care-giving, severe care-giving stress, guilty feeling for their adult children and shame for their ancestors, anxiety for the unstable future, lack of self-care, and lack of social assistance. Grandparents with high generativity level showed voluntary care-giving, positive reaction for the reversed parental care, feeling of usefulness for care-giving, hope for the future, existence of self-care, and existence of social assistance. Further discussion and suggestions were made from the study results.