• Applied Biological Chemistry
• /
• v.43 no.4
• /
• pp.285-290
• /
• 2000

This research was carried out to investigate the runoff pattern of nutrients by rainfall from the paddy field located at the southwest of Korea. Effective rainfalls were 17.0 and 21.2 mm for irrigation and non-irrigation period, respectively. The first runoff in paddy field was 6.3-33.7 mm (average=12.9 mm) and 5.9-12.5 mm (9.2 mm) for irrigation and non-irrigation period, respectively. And runoff ratio was 0.59-1.36 and 0.57-0.86 for irrigation and non-irrigation period, respectively. During irrigation and non-irrigation period, the outflow increased significantly with the precipitation. Pattern of precipitation-runoff differed between irrigation and non-irrigation period, as affected by precipitation intensity, hydrological condition, and cropping. There existed a linear relationship between the runoff loading of N and P and precipitation. During the irrigation and non-irrigation period, runoff loadings of N and P were not significantly different. However, there was significant difference in case of total suspended solids.

• Journal of Korean Society on Water Environment
• /
• v.29 no.5
• /
• pp.674-680
• /
• 2013

Basic studies for the treatment of particulate organic substances contained in wastewater by flotation have been conducted. Four kinds of plastics were chosen as the possibly existing organic particles in wastewater and the Zisman plots for these substances were constructed by measuring the contact angle of liquids on their surfaces. The critical surface tensions for these organic substances were estimated based on the constructed Zisman plot and the floatability of organic substances were regarded to be related with their molecular structure. The existence of dissolved organic substances such as a surfactant was observed to affect the extent of flotation of particulate organics. In addition, the consideration of work of adhesion was thought to be better than adopting the critical surface tension as the analytical basis in the operational design of flotation process of organic particles.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.15-20
• /
• 2003

During operation process of SIES(Selective ion exchange system) at Kori Unit 2, it was impossible to remove radionuclides such as ion form and Ag-110m, etc., because activated carbon and ion exchange resin of this system are fouled easily by suspended solids and oils in liquid radwaste that was flowed in this system. In this study, an experiment to improve quality of water which was flowed in SIES was performed. and design data of Scale-up pretreatment process were secured. Also, each module design for Microfiltration and Nanofiltration unit of the pretreatment process for SIES was performed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.583-583
• /
• 2013

화학 기상 증착법(Chemical Vapor Deposition)이나 플라즈마 식각(Etch) 등의 반도체 공정에서 챔버 내벽의 상태에 대한 모니터링은 매우 중요하다. 챔버 벽면에 증착된 유기 또는 무기 물질이 다시 떨어져 나와 불순물 입자 형성의 원인이 되며, 플라즈마를 원하지 않는 상태로 바꾸어 놓아 공정 조건이 달라질 수도 있기 때문에 반도체 제조 수율 저하를 초래하기도 한다. 본 연구에서는 챔버 벽면이 증착되는 환경에서 평판형 탐침을 삽입하여, 증착된 박막의 두께측정 기술을 개발하였다. 전기적으로 부유된 평판 탐침에 정현파 전압을 인가하고 이 경우 플라즈마로부터 들어오는 전류의 크기 및 위상차 측정을 통해 대략적인 증착 박막 두께를 측정 하였다. 플라즈마와 챔버 벽 사이에 존재하는 쉬스의 회로 모델을 적용하여 플라즈마 상태에 무관하고, 가스 종류 및 유량, 입력 전력, 챔버 내부 압력등의 외부 변수에도 독립적으로 측정이 가능하였다. 본 연구는 반도체 장비에서 내벽 모니터링을 통해, PM 주기 조정을 최적화 시키는 잣대의 역할을 할 수 있을 것이다. 더 나아가, 반도체생산 수율 향상에 많은 도움이 될 것이다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.86-96
• /
• 2002

The distributions of suspended particulate matter (SPM), chlorophyll a, particulate organic carbon (POC) and nitrogen (PON) and particulate biogenic silica (PBSi) along the salinity gradient were investigated in the Seomjin River estuary from March 1999 to April 2001. Sampling sites were set based on the surface salinity during each cruise rather than geographic locations. Concentrations of SPM were less than 20 mg/L, suggesting relatively low input of terrestrial SPM despite large freshwater discharge through Seomiin River, Chlorophyll a peaks occurred at 5$\~$ 15 psu salinity zone (10$\~$20 km from Nan Cho Island) in November 1999, at 15$\~$25 psu (10$\~$20 km) salinity zone in April 2000 and at 1$\~$15 psu salinity zone (15$\~$20 km) in October 2000 (ca. 8$\~$58%\mu$g/L). Concentrations of POC, PON and PBSi were also high at the same zone. Relatively low ratios of POC to chlorophyll a in mid-salinity zone where POM peak occurred suggests high contribution of living phytoplankton to the total POC. On the other hand, relatively high ratios of POC to chlorophyll $\alpha$ in very low salinity zone and the mouth of estuary indicated relatively high portions of detrital POC. Consequently, the low concentrations of SPM in this estuary and the high concentrations of chlorophyll $\alpha$ and the low ratios of POC to chlorophyll $\alpha$ in the mid-salinity zone suggest that production of living phytoplankton is primary factor in controlling distribution of POM along the salinity gradients in the Seomjin River estuary.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.451-464
• /
• 2008

Three-phase inverse fluidized bed has been widely adopted with its increasing demand in the fields of bioreactor, fermentation process, wastewater treatment process, absorption and adsorption processes, where the fluidized or suspended particles are small or lower density comparing with that of continuous liquid phase, since the particles are frequently substrate, contacting medium or catalyst carrier. However, there has been little attention on the three-phase inverse fluidized beds even on the hydrodynamics. Needless to say, the information on the hydrodynamics and transport phenomena such as heat and mass transfer in the inverse fluidized beds has been essential for the operation, design and scale-up of various reactors and processes which are employing the three-phase inverse beds. In the present article, thus, the information on the three-phase inverse fluidized beds has been summarized and reorganized to suggest a pre-requisite knowledge for the field work in a sense of engineering point of view. The article is composed of three parts; hydrodynamics, heat and mass transfer characteristics of three-phase inverse fluidized beds. Effects of operating variables on the phase holdup, bubble properties and particle fluctuating frequency and dispersion were discussed in the section of hydrodynamics; effects of operating variables on the heat transfer coefficient and on the heat transfer model were discussed in the section of heat transfer characteristics ; and in the section of mass transfer characteristics, effects of operating variables on the liquid axial dispersion and volumetric liquid phase mass transfer coefficient were examined. In each section, correlations to predict the hydrodynamic characteristics such as minimum fluidization velocity, phase holdup, bubble properties and particle fluctuating frequency and dispersion and heat and mass transfer coefficients were suggested. And finally suggestions have been made for the future study for the application of three-phase inverse fluidized bed in several available fields to meet the increasing demands of this system.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.309-316
• /
• 2016

In this study, sewage was fed with up flow direction into a reactor equipped with a screw to circulate media that had lower specific gravity than water. It was observed that the media in the reactor could be circulated by a screw with reverse flow of the sewage feeding from the top to the bottom direction. Under these conditions, concentrations of inflow and outflow pollutants were measured at the filtration unit. Experimental results revealed stable circulation of the media with a screw in the reactor. Circulation of the media in the reactor showed more efficiency in removing the pollutants (particulate matters and organics) than no circulation. The maximum removal efficiencies of suspended solid (SS), chemical oxygen demand (CODmn), and total phosphorus (T-P) were 96%, 72% and 65%, respectively. Improvements for SS, CODmn and T-P removals with circulation of media were 52.38%, 43.14% and 118.12% respectively, compared to those without circulation.

• Economic and Environmental Geology
• /
• v.47 no.1
• /
• pp.39-48
• /
• 2014

In coastal region, estuaries have complex environments where dissolved and particulate matters are mixed with marine water and substances. Suspended sediment (SS) dynamics in coastal water, in particular, plays a major role in erosion/deposition processes, biomass primary production and the transport of nutrients, micropollutants, heavy metals, etc. Temporal variation in suspended sediment concentration (SSC) can be used to explain erosion/sedimentation patterns within coastal zones. Remotely sensed data can be an efficient tool for mapping SS in coastal waters. In this study, we analyzed the variation in SSC in coastal water using the Geostationary Ocean Color Imager (GOCI) and Landsat Enhanced Thematic Mapper Plus (ETM+) in Gyeonggi-bay. Daily variations in GOCI-derived SSC showed low values during ebb time. Current velocity and water level at 9 and 10 am is 37.6, 28.65 $cm{\cdot}s^{-1}$ and -1.23, -0.61 m respectively. Water level has increased to 1.18 m at flood time. In other words, strong current velocity and increased water level affected high SSC value before flood time but SSC decreased after flood time. Also, we compared seasonal SSC with the river discharge from the Han River and the Imjin River. In summer season, river discharge showed high amount, when SSC had high value near the inland. At this time SSC in open sea had low value. In contrast, river discharge amount from inland showed low value in winter season and, consequently, SSC in the open sea had high value because of northwest monsoon.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.4
• /
• pp.439-445
• /
• 2008

Sawdust is considered one of the cheapest and abundantly available adsorbents, and it is not necessary to regenerate. The spent sawdust can be incinerated or reused as a fuel. The sawdust adsorption can be applied to the removal of color and metal cations from the wastewater. The aim of this study was to evaluate the adsorptive capacities of sawdust with respect to color, COD, SS, turbidity, metal cation from textile wastewater. Langmuir, Freundlich, BET and Sips adsorption isotherm were obtained for the sawdust adsorption of Fe(III). The effects of particle size and amount of sawdust on the adsorption of Fe(III) were also studied. COD, SS, color, turbidity and Fe(III) removal efficiencies were examined at the continuous fixed-bed adsorption test. It was showed the removal efficiencies of SS 50.0%, Fe(III) 25.0%, turbidity 79.4%, color 48.6% and COD 50.9%. In addition, the changes of surface structure between before and after adsorption were investigated through SEM analysis. It is confirmed that the waste sawdust can be successfully used as an adsorbent for wastewater treatment.

• Korean Journal of Ecology and Environment
• /
• v.53 no.1
• /
• pp.91-101
• /
• 2020

Stormwater runoff is known as a major non-point water pollution source that transports heavy metals, which have accumulated in road surface, to stream and coastal area. Dissolved and particulate metals in stormwater runoffs have been investigated to understand the outflow characteristics of heavy metals during rainfall events and to identify their pollution sources. The concentration of dissolved Co and Ni decreased after the outflow with high concentrations at the beginning of the rainfall, and other metals showed different characteristics depending on the rainfall and rate of discharge. Particulate metals showed a similar trend with the temporal variation of suspended solids concentration in stormwater runoffs. The results of geo-accumulation index (I_geo) indicated that the stormwater runoffs from industrial region were very highly polluted with Cu, Zn and Cd. As a result of comparing the metal concentrations of <125 ㎛ for road dust near the study area, Cu, Zn and Cd were originated from inside of metal manufacturing facilities rather than traffic activities at road surface and these metals accumulated on the surface area of facilities were transported to the water environments during stormwater event. The average discharged amounts of heavy metals for one rainfall event were Cr 128 g, Co 12.35 g, Ni 98.5 g, Cu 607.5 g, Zn 8,429.5 g, As 6.95 g, Cd 3.7 g, Pb 251.75 g, indicating that metal runoff loads in the stormwater runoffs are closely related to surrounding industry types.