• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.145-148
• /
• 2004

수중음향 시스템에서는 빔형성(Beamforming) 기법을 이용하여 목표물로부터 신호를 수신하고 이에 대한 정보를 얻어낼 수 있는데, 이러한 빔형성에 있어서 주엽(Mainlobe)의 빔폭(Beamwidth)과 부엽(Sidelobe)의 크기(Level)를 설계자가 목표하는 값에 최적화 시킬 수 있는 방법을 찾는 것이 무엇보다도 중요하다 최근 연구된 빔형성 기법의 대표적인 결과 중 하나로는 Phi1ip의 Weighting Function Method를 들 수 있다. 이러한 Phi1ip의 방법은 목표 주엽폭과 부엽 준위를 정하고 이를 적응필터 설계방식과 유사하게 적응시켜 나가는 과정을 이용한다. 그러나 이 방법은 주엽폭과 부엽 준위간의 상관관계로 인해서 원하는 부엽준위에 다다르지 못하거나 결과값을 얻는데 상당한 시간이 소요되는 경우가 자주 발생하는데, 이러한 단점을 보완하기 위하여 본 논문에서는 부엽 준위에 미치지 못하는 일부에 대하여 부분 최적화를 시켜 비교적 쉽게 설계를 만족시키는 새로운 알고리듬을 제안하고자 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.8
• /
• pp.570-575
• /
• 2004

In the underwater acoustic systems. we can receive signals and retrieve information about a target by using a beamforming method. The most important thing in the beamforming is finding the way to optimize the mainlobe beamwidth and the sidelobe level to the desired value. One of the prominent results of beamforming method. which has been studied. is Philip's weighting function method(1) . Philip's method adaptively adjusts its weights of array to meet the desired mainlobe beamwidth and sidelobe level. It is very similar to the design method in adaptive filter. However. this method cannot easily bring us to the desired sidelobe level due to complementary relation between mainlobe beamwidth and sidelobe level. In this paper, we propose a new algorithm using partial constrained adaptation. This method makes us circumvent the above problem and meet the specification of design easily. The proposed algorithm presents a Pattern synthesis that designer can easily control the mainlobe beamwidth and the sidelobe level to the desired value while calculation time to converge is decreasing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.684-692
• /
• 2016

In this paper, a non-offset longitudinal shunt slot excited by an asymmetry compound iris on the broad wall of a rectangular waveguide is presented as an element for a waveguide slot-array antenna(WSAA). By properly adjusting the iris dimension, a resonance of the slot at a desired frequency can be achieved. The proposed resonant slot has some advantageous properties, such as a wide range of normalized resonant conductance, and minimum change of phase in the waveguide at the resonance. In addition, when the slots are arrayed for a waveguide slot antenna, the unwanted cross-polarization level can be reduced because each slot is placed in a straight line. A $8{\times}1$ WSAA with -20 dB side-lobe level(SLL) is designed, fabricated, and tested experimentally. The measured results are well agreed with the simulated ones and have an SLL of -18.13 dB and a cross-polarization level of -48.85 dB at 9.41 GHz, which was improved by about 15 dB of that of the conventional longitudinal slot array antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.414-423
• /
• 2015

Array error analysis and correction of active array antenna are described in this paper. Array elements composed of radiator and TR(Transmit & Recive) module have error(magnitude and phase difference among array elements) which affects SLL(Side Lobe Level). Error affectedness level depends on ideal SLL according to antenna aperture weighting, number of array elements and antenna effective aperture. To satisfy required SLL, correction of array elements is necessary; adopted differently per errors, and weighted differently per shapes of antenna and required SLL. Errors of every individual element had been defined, performance of the antenna with or without error correction had been estimated and proved through near field test.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.40-45
• /
• 1996

In this paper, a nonlinear optimal design technique is presented to find an optimal beam pattern. With this technique, the beam width is minimized with respect to a given maximum allowable side-lobe level considering the self- and mutual radiation impedances of vibrators. The proposed method is applied to design a planar array consisting 37 vibrators which are symmetric in X, Y and $45^{circ}$ axes. The results show that significantly low side-lobe level maintaining a main beam width can be obtained using this method.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.110-115
• /
• 2001

In this paper, we propose a beamformer adequate for the nested away that is generally used for multiple frequency band signal processing. The nonisotropic beam pattern of channel in this array causes two problems: the bearing-estimate error of mainlobe and the difference between design and output in sidelobe level. By separating the time delay among channel signals and the time delay among sensor signals in channel, we can remove the effects of the nonisotropic beam pattern of channel in the beamformer output. Through this process, a method to correct simultaneously these problems is proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.9B
• /
• pp.1676-1682
• /
• 1999

In this paper, the double circular array microstrip patch antenna was designed to minimize the side lobe in which a cooperate feeding network was used to supply the same amplitude and equi-phase to each antenna element. Eight microstirip patch antenna(MPA) elements were arrayed with $45^{\circ}$ interval in the inner circle and the outer circle respectively. The simulation results showed that when the radii of the inner circle and the outer circle were 0.7 $\lambda$0 and 1.45 $\lambda$0, the side lobes of beam pattern were minimized. As the results of the measurements, the return loss of the designed antenna was -14.5[dB] at 11.75[GHz] in the input terminal. When the level of the main lobe was normalized at 0[dB], those of the first and the second side lobe were -18[dB] and -26[dB] respectively. The radiation patterns agree well with the simulated patterns.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.105-111
• /
• 2019

In this paper, a performance analysis of waveguide broad-wall slot array antenna for millimeter-wave seeker in Ka-band was performed as using near-field measurement. The measurement of slot array antenna was conducted in both far-field and near-field. And the validation of near-field test in millimeter band was confirmed. It was confirmed that the beam pattern characteristics including beam width and side lobe level of the slot array antenna that performed the verification were the same. Differenced in the side lobe level of azimuth and elevation beam pattern were verified to be less than 1dB. Additionally, the new antenna aperture distribution was extracted as using back-projection method modifying the near-field data and then introduced the method conducting performance analysis of array antenna.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.155-158
• /
• 1998

본 논문에서는 2차원 평면 배열에서 소자들간의 간섭 영향을 빔 설계 기법을 제안한다. 실제적으로 빔을 구현할 때, 소자간 간섭이 전체 빔 패턴을 변화시키게 되어 성능을 저하시킬 수 도 있다. 따라서 보다 정확하게 빔을 설계하기 위해서는 소자간의 간섭 영향을 고려한 빔 설계 기법이 필요하게 된다. 본 논문에서는 특성을 알고 있는 소자로 구성된 평면 배열에서 다른 소자에 의한 간섭을 예측한 후 이것을 각 소자의 가중치에 포함 시켜 원하는 사양의 빔을 설계할 수 있도록 한다. 빔 설계방법으로는 선형 최소자승법을 이용하여 빔의 부엽준위의 위치와 크기를 변화시키면서 원하는 조건의 빔 가중치를 얻어내는 알고리듬을 도입하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1351-1358
• /
• 2012

In this paper, an analytical technique is proposed for the design of interleaved thinned planar array with well-behaved and predictable sidelobes. The interleaved arrays are composed of thinned planar subarrays based on cyclic difference sets(DSs). Becauce sidelobes of thinned planar subarrays based on DS are predictable by DS parameters, the subarrays exhibit very similar sidelobe levels by utilizing DS and complementary DS with similar autocorrelations each other. The combinatorial method also allows the design of interleaved placements with simultaneously optimum peak sidelobe levels(PSLs) of subarrays using cyclic shift-a property of DSs. The optimized PSLs of the interleaved array are -12.47 dB and -10.34 dB.