• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.1
• /
• pp.31-40
• /
• 2005

High temperature - high pressure apparatus was developed to simulate nickel fewite corrosion products which were main compositions of the radioactive crud in the nuclear power plant. Corrosion product similar to the crud was obtained by a tube accumulator system. Nickel alloy (Inconel 690) and carbon steel (SA106 Gr. C) were corroded at 270 $\^{circ}C$ in the corrosion product generator. Ni ions and Fe ions dissolved by corrosion reaction were able to be transported to the accumulator because the crud generation mechanism was the solubility change with temperature. To evaluate the properties of simulated corrosion products, scanning electron microscope (SEM) observation and EDAX analysis were performed. SEM observation of corrosion product showed the needlelike or crystal structure of oxide depending on precipitating location. The crystal oxide was the nickel ferrite, which was similar to the crud in nuclear power plants.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.393-396
• /
• 2008

The purpose of this paper is to find out quantitatively the relationship between the surface shape and the mechanical properties of corroded reinforcement. Three-dimensional measurements were carried out on the surface shape of variously corroded reinforcements and parameters expressing the characteristics of the shape, which included the maximum decrement of sectional area of reinforcement, its distribution along the axis. It was investigated that which parameters could correspond to the mechanical properties of corroded reinforcement and it was confirmed that the maximum decrement of sectional area of reinforcement could express the mechanical properties most appropriately. Finally, this paper proposes a constitutive model of corroded reinforcement for analyzing the structural behavior of reinforced concrete structures considering the localized corrosion of by finite element method.

• Applied Biological Chemistry
• /
• v.9
• /
• pp.153-159
• /
• 1968

In this paper the auther investigated the chemical properties, process of humification and type of humic acid in soils which were reclaimed by farming for cultivation in Kangwondo. The results obtained in this studies were summarized as follows: 1. General chemical components of these soil were similar to the ordinary soil but C.E.C. and humus contents were found much more 2. Humic acid and fulvic acid which were extracted with NaOH from soil were greater than those of Na-pyrophosphate(Na-p.) and NaF. Hmus contents and PQ% were increased much more in the upper layer than in the lower layer. 3. Degree of humification of humic acid extracted with NaOH. was very similar to those extracted with Na-pyrophosphate. Humification degree of humic acid extracted with NaF was lower than humic acid which were extracted with NaOH and Na-pyrophosphate. But humification degree of humic acid extracted with NaOH was similar to that with Na-pyrophosphate. Humic acid in B soil and the upper layer was higher than A, C soil and the lower layer of soil, in humification degree. 4. Humic acids extracted with NaOH and Na-pyrophosphate from soil were fractionated by Mg into two parts ${\alpha}$ type and ${\beta}$ type humic acid. Humic acids of ${\alpha}$ and ${\beta}$ type extracted with NaOH were higher than these of Na-pyrophosphate in humification degree. In this soil the humification degree of humic acid was not changed during the period of cultivation. 5. ${\alpha}$, ${\beta}$ type humic acid extracted with NaOH were very similar to the humic acid extracted with Na-pyrophosphate in shapes of absorption curves.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.217-218
• /
• 2009

최근 경량화, 리사이클성, 기기의 소형화, 내환경성 등의 이점을 가지고 있는 알루미늄 합금이 여러 분야서 재인식 되고 있다. 그러나 이런 알루미늄 합금이 부식 환경에 노출 될 경우 음력부식균열이 발생할 수 있게 된다. 이러한 음력부식균열의 발생은 알루미늄의 기계적 특성에 안 좋은 영향을 미치므로 제품의 품질저하, 수명 단축, 효율저하, 재해발생 등 직간접적으로 광범위한 피해를 입게 되기에 부식에 대한 많은 연구가 진행이 되고 있다. 이 중에 고비강도용 알루미늄 압출소재인 Al 6xxx계 합금의 열처리 및 조성 변화에 따른 음력부식 균열의 거동에 대해 연구하였다. 응력부식균열 시험은 SSRT시험으로 많이 하고 있는데, 이 시험은 인장시편을 부식 환경 하에 노출하면서 천천히 일정한 변형속도로 당기는 시험이다. 본 연구에서는 Strain rate를 ${10^{-6}}s^{-1}$ 부식용액은 1M-NaCl + 0.6M-$Na_{2}SO_{4}$ + 0.3%-$H_{2}O_{2}$을 사용하여 시험을 하였다. 그러나 시험에 대한 분석은 Tafel polarization curve, SEM, OMS를 이용하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.37-37
• /
• 2014

유증기 처리 설비에서 발생하는 황화합물의 황산화 현상에 따른 부식손상은 설비의 안전운영 및 유지보수 공정에 영향을 미치는 주요 원인이며, 이에 대한 대책이 필요한 실정이다. 본 연구에서는 실제 유증기 가스 및 설비공정 상에서 발생되는 침출수를 채취하여 각각의 성상을 분석하고 부식을 일으킬 수 있는 황산화 현상에 대한 연구를 수행하였다. 또한, 발생 유증기의 액화에 따른 침출수의 배관부식 영향성을 확인하기 위하여 배관용 강관재료에 대한 무게감량시험 및 전기화학시험을 통해 침출수 pH 조건에 따른 부식경향성을 평가함으로써 유증기 처리설비의 부식방지 대안을 제시하고자 한다.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.533-539
• /
• 2013

The electrochemical corrosion and passivation of Ni rotating disk electrod in borate buffer solution was studied with potentiodynamic and electrochemical impedance spectroscopy. The mechanisms of both the active dissolution and passivation of nickel and the hydrogen evolution in reduction reaction were hypothetically established while utilizing the Tafel slope, impedance data, the rotation speed of Ni-RDE and the pH dependence of corrosion potential and current. Based on the EIS data, an equivalent circuit was suggested. In addition, carefully measured were the electrochemical parameters for specific anodic dissolution regions. It can be concluded from the data collected that the $Ni(OH)_2$ oxide film, which is primarily formed by passivation, is converted to NiO by dehydration under the influence of an electrical field.

• Journal of the Korean Chemical Society
• /
• v.58 no.5
• /
• pp.437-444
• /
• 2014

The electrochemical corrosion and passivation of Co-RDE in borate buffer solution was studied by Potentiodynamic and electrochemical impedance spectroscopy. The mechanisms of both the active dissolution and passivation of cobalt and the hydrogen evolution in reduction reaction were hypothetically established while utilizing the Tafel slope, the rotation speed of Co-RDE, impedance data and the pH dependence of corrosion potential. Based on the EIS data, an equivalent circuit was suggested. In addition, the electrochemical parameters for specific anodic dissolution regions were carefully measured. An induction loop in Nyquist plot measured at the open-circuit potential was observed in the low frequency, and this could be attributed to the adsorption-desorption behavior in the corrosion process.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.5-14
• /
• 2017

Humic acid was used soil amendment or functional fertilizer in Korean agriculture, and its cation exchangeable capacity was high enough to increase soil buffering from plant toxicant. This study was conducted to evaluate effects of humic acid powder (HA) on composting of livestock manure (LM) and of its application on growth of lettuce. Treatments were designed as follows; livestock manure compost (LM+sawdust+bark+castor meal; Control), control+0.1% HA (0.1% HA), control+0.5% HA (0.5% HA), control+1.0% HA (1.0% HA), control+3.0% HA (3.0% HA), and control+5.0% HA (5.0% HA). The changes of temperature, water content, organic matter content, total nitrogen and ratio of organic matter and nitrogen in HA treatments were similar to those of control. Although pH of 3.0% HA and 5.0% HA blending with HA and LM was lower than those of others, it unaffected by HA blending during composting. Humic acid content of HA treatments was increased by 1.7~4.4 folds than that of control. As compared with odor index, 3.0% HA and 5% HA were decreased than control for composting time. Application of 3.0% HA increased the dry weight of lettuce by about 7% than that of control.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.907-910
• /
• 2008

Recently sewage facilities mainly consisted of concrete structures are being deteriorated seriously by biochemical reaction originated from sulfur-oxidizing bacteria. To prevent biochemical corrosion of the sewage concrete, antibiotics which inhibit growth of sulfur-oxidizing bacteria have to be developed and applied necessarily. In this study, we are going to introduce technology which biochemical corrosion of sewage facilities concrete could be controlled effectively by antibiosis of antimicrobial concrete

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.4
• /
• pp.84-91
• /
• 1985

Acute angle etching Process of thermally grown silicon dioxide layer has been Proposed by depositing a thin layer of silicafilm on the thermal oxide layer. As densification temper-ature of silicafilm is varied from 175$^{\circ}C$ to 1,15$0^{\circ}C$, taper angles from 3$^{\circ}$ to 40$^{\circ}$ are ob-tained. Analytical model of the acute angle etching process has also been presented and etched profile equations of the silicon dioxide layer have been derived using format's principle of lease time. Etched profiles obtained from scanning electron microscope analysis show good agreement with the theoretically calculated profiles.