Proceedings of the Korean Geotechical Society Conference
/
2007.09a
/
pp.115-123
/
2007
설계 하중이 큰 대형 구조물의 기초로 많이 사용되는 현장타설말뚝은 현장에서 지반을 굴착하여 조립된 철근망을 삽입한 후, 콘크리트를 타설하여 제작되므로 복잡한 시공 과정과 현장의 특수한 지하수 및 지반 조건으로 인하여 현장타설말뚝의 내부에는 결함이 포함될 수 있다. 발생 가능한 대표적인 결함으로 연약한 말뚝 선단, 말뚝체 콘크리트의 품질 저하, 말뚝과 지반의 접촉 불량, 주 철근의 부식 등이 있으며, 이들 결함을 감지하기 위한 건전도 시험법으로 공대공초음파 검층, 충격반향시험, 충격응답시험, 감마-감마 검층법 등이 있다. 결함은 말뚝의 수평지지력을 감소시키며, 일반적으로 발생하는 비대칭단면 결함에 의한 응력 집중현상과 수평 하중에 의한 휨모멘트는 연직지지거동에 영향을 준다. 따라서 결함을 감지하고 평가하는 것이 현장타설말뚝의 품질관리에 있어 매우 중요하다.
Proceedings of the Korea Concrete Institute Conference
/
2009.05a
/
pp.301-302
/
2009
Uncertainties in carbonation process of concrete structures are treated by probability-based durability analysis for carbonation using Monte Carlo simulation technique. The results requires the minimum cover thickness of 53mm for 10% of corrosion probability under 4mm/$year^{0.5}$ of carbonation coefficient. The more researches on statistical properties of design variables may give reliable durability analysis/design methods for carbonation of concrete structures.
석탄가스화 기술은 석탄을 고온/고압 조건에서 가스화 반응시켜 CO와 $H_2$가 주성분인 합성가스(syngas)로 전환시키는 기술이다. 그러나 가스화 반응으로 인해 합성가스 내에는 불순물인 $H_2S$, COS, $NH_3$ 등의 오염 물질이 발생하게 되며, 가스터빈의 부식, 촉매의 피독, 전극의 성능 저하 현상 등을 일으켜 효율을 저하시키게 된다. 이에 본 연구에서는 FeMgO 촉매를 제거용매로 사용하여 $H_2S$를 효과적으로 제거하기 위하여 Lab-scale 탈황 설비를 제작하였으며, 석탄 가스화 운전에 연계하여 합성가스 내 포함된 산성가스 정제 특성에 관한 연구를 진행하였다.
Proceedings of the Korean Society of Soil and Groundwater Environment Conference
/
2002.09a
/
pp.191-194
/
2002
Humic acid, fulvic acid and humin present in volcanic ash soil were isolated by IHSS standard procedure and their characteristics were analyzed as a basic study to evaluate the effect of humic substances on the behaviour of pollutants in contaminated surface soil. The volcanic ash soil contained 42.1 % of total organic matter based on the oven-dried soil, and humin, humic and fulvic acids corresponded to 67.5 %, 15.2 %, 7.6 % of TOM respectively. Structural informations of the humic fractions were obtained from their elemental analysis and IR, CPMAS C-13 NMR spectral analysis and the differences among them are discussed with their C/H, O/C ratios and distributions of carbon types in the molecules.
The chemical and geometric effects of weld on flow-accelerated corrosion (FAC) of SA106 Gr.C low alloy steel pipe in 3.5wt% NaCl and simulated feedwater of nuclear power plant have been investigated by using rotating cylinder electrode. Polarization test and weight loss test were conducted and compared at rotating speed of 2000rpm (3.14m/s) with the variables of chemical and geometric parameters. The results showed that the chemical effects were relatively larger than the geometric effects, and the welded parts were the local anode and preferentially corroded, which could be explained by the differences between microstructural and compositional parameters. On the other hand, under active corrosion conditions, the heat affected zone were severely corroded and microstructural effects became the important role in the whole process.
Proceedings of the Korean Society of Precision Engineering Conference
/
1994.10a
/
pp.150-155
/
1994
종래의 초내열합금은 원자력산업과 우주항공산업등에 주로 사용되었으며, 산업이 고도화되어짐에 따라 각종 산업기계와 자동차 분야에까지 광범위하게 사용되어지고 있다. 대표적인 초내열합금으로서의 인코넬(Inconel)은 인성과 Creep 특성이 우수하고, 특히 고온강도가 높고 화학적으로도 안정하여 부식에도 강한 장점을 지니고 있어 항공기 부품재료로서 최근 각광을 받고 있다. 본 연구에서는 일반적으로 사용되어지고 공구재종인 코팅초경합금공구와 세라믹 공구를 사용하여 초내열합금인 인코넬 600을 절삭가공하여, 절삭저항,공구의 파손 및 마모,칩의 용착현상등의 가공성에 영향을 주는 요인에 대하여 검토함으로써, 공구의 종류에 대ㄷ응하는 적절한 절삭영역을 설정하는 것을 목적으로 하였다.
고강도 알루미늄합금은 중량이 가벼우면서 인장강도와 항복강도가 높고 가공성, 성형성이 좋아 항공기, 자동차, 선박 등 수송용 재료로 각광을 받고 있으며, 이 중 Al-Zn-Mg계(7000계) 알루미늄 합금은 용접 구조물용 경량소재로 활용범위가 높다. Al-Zn-Mg계 알루미늄 합금은 고온에서 용체화 처리후 저온으로 급냉시킨 재료를 자연시효 또는 인공시효처리를 하여 이 때 석출되는 시효 석출물에 의해 강도를 증가시킨 석출 경화형 합금이다. 그런데, 7000계열 알루미늄합금은 적절한 열처리 작업을 통해 최적의 기계적 성질이 얻어지도록 합금설계가 되어있기 때문에 구조물 제작시 용접에 의한 ARC 열을 받게 되면 열이력(thermal cycle)에 의해 모재의 미세조직이 변화하고 용접 결함이 발생하며 강도의 약화와 함께 내식성 등이 저하한다. 따라서 고강도 알루미늄합금의 용접성을 향상시키기 위해서는 용접부의 미세조직거동과 용접부에 발생하는 용접결함의 현상을 조사하여 용접용 고강도 합금에 필수적으로 요구되는 용접성에 대한 검토가 충분히 이루어져야 한다. 따라서 본 고에서는 알루미늄합금, 특히 7000계열 알루미늄합금에 주목하여, 용접방법, 각종 결함과 대책, 용접부의 시효경화와 응력부식균열 및 기계적 성질 등을 지금까지 보고된 각종 자료를 기초로 하여 3회에 걸쳐 기술하고자 한다.
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.324-324
/
2013
자동차의 경량화 요구에 따라 비중이 큰 기존의 철계 금속재에서 비중이 낮은 알루미늄 합금 및 마그네슘 합금의 경량 금속 재료로 대체 적용하는 것이 요즘의 추세이다. 마그네슘 판재 성형의 경우 윤활제로 인한 마그네슘 판재의 부식이 발생할 수 있다. 이를 개선하기 위해 윤활제의 사용을 최소화 혹은 제로화가 가능하게 하는 진공 플라즈마 표면처리 기술이 시급하다. 본 연구는 무윤활 마그네슘 판재성형을 위한 금형 표면처리 기술로서 각각 질화처리, 비정질 탄소 코팅 공정기술에 관한 연구를 수행하였다. 플라즈마 질화처리는 기존의 질화방법에 비교하여 비교적 저온에서 짧은 시간에 표면에 백화현상이 발생하지 않는 대면적 플라즈마 질화공정 기술 구현이 가능하였으며, 비정질 탄소 코팅 공정은 모재와의 밀착력을 높이기 위한 공정 조건을 연구하였다. 각각의 표면처리된 금형을 이용하여 성형테스트를 실시하고 이 때의 마그네슘 판재의 성형성을 관찰하였다. 따라서 본 연구의 최종 목표는 무윤활 상태에서 마그네슘 판재가 성형이 가능한 금형 진공 표면처리 방법을 개발하는 것이다.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.24
no.8
/
pp.21-26
/
2010
Recently, since the prevalence of electric driving transfer system arouse the electric corrosion of neighboring underground metal establishment, the problems caused by that kind of electric corrosion became very serious. In this paper, we studied about a theoretical concept and concrete concepts of electric corrosion and tried suggested an optimistic chemico-electrical measures on the electric corrosion of underground metal establishments.
One of the most serious promblems in the concrete structures is cracking failure due to the several complicated reasons. These cracks are not only serious structural problems, but also lower the durability and deteriorate the structural shape, which cause the reinforcement rust in the open air and sea water. An analytical study was undertaken to investigate the cracking problems in the one of concrete caissons using Finite Element Method. This caisson is modelled with plate elements and truss elements for the walls and lifting cables respectively and analyzed in the every construction stages, such as lifting, moving, sinking, filling, towing, setting, and proposed reasonable construction methods for the concrete caisson structures.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.