• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.895-902
• /
• 2007

Rotating machinery has two typical faults with clearance, one is partial rub and the other is looseness. Due to these faults, non-linear and non-stationary signals are occurred. Therefore, time-frequency analysis is necessary for exact fault diagnosis of rotating machinery. In this paper newly developed time-frequency analysis method, HHT(Hilbert-Huang Transform) is applied to fault diagnosis and compared with other method of FFT, SFFT and CWT. The results show that HHT can represent better resolution than any other method. Consequently, the faults of rotating machinery are diagnosed efficiently by using HHT.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.882-885
• /
• 2002

Assessing the condition of air insulation by measuring electromagnetic wave generated in it by partial discharges gives warning of developing faults and breakdown which may give some bad effects to other thing concerned with it. Electromagnetic wave are taken from UHF antenna with 20k ~ 2GHz frequency range. The signal waveform and FFT(Fast Fourier Transform) results from UHF antenna for PD(partial discharge) generated from two different electrode(needle-plane, needle-needle) configurations are shown and it is processed by using PRPD($\Phi-q-n$ distribution) method. Cumulative pulse sequence during 100 period is compared with PRPD method. This also will show the possibility of making apparent distinction between two PD sources.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.1-2
• /
• 2014

In this paper the partial switching PFC converter which is based on predictive control is proposed. In terms of satisfying the harmonic standard, the predictive control shows a similar performance to the conventional average current mode control PFC in the normal input condition. Moreover, the current harmonic characteristic is insensitive to the distorted input voltage. With predictive control method, novel on-line partial switching strategy is suggested in this paper. Depending on the operating condition, the partial switching PFC converter can boost its output voltage. Also when its efficiency needs to be improved, according to load condition, the partial switching can be achieved. The proposed strategy is proved by the results of FFT and the loss analysis using PSIM 9.0.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.369-371
• /
• 2001

이 논문에서는 디지털 시그널 프로세싱에 적합하지 않은 RISC타입의 DB-X 마이크로콘트롤러를 이용하여 MP3 플레이어를 구현한 방법을 제안한다. DB-X 에는 DSPA 모듈이 있어 FIR, FFT 등 계산이 많이 요구되는 부분을 DSP 수준으로 빨리 연산해 줄 수가 있으며 SSI 모듈이 있어서 44.1khz의 샘플링 주기를 가지는 D/A 코덱과 연결할 수가 있다. 또한 SSI와 음성 데이터가 저장되어 있는 메모리 사이를 CPU 부담없이 데이터를 전송하기 위한 DMA 모듈이 있어 MP3 데이터를 프레임 단위로 디코딩할 때 더블 버퍼링 기법을 쉽게 사용할 수가 있다.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.560-562
• /
• 2002

This paper describes measurement and diagnosis methods for electromagnetic wave using a VHF(Very High Frequency) antenna. In the laboratory partial discharges are generated on a needle-plate and a plate-plate configuration. The detected electromagnetic wave is analyzed by FFT(Fast Fourier Transform). We propose a methode to classify creeping partial discharge and corona partial discharge that are detected in three frequency bands.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.99-106
• /
• 2002

For the development of a ultra-precision CNC polishing system including on-machine measurement system, we study a corrective polishing algorithm. We calculated unit removal profiles for various flat type polishing tools and polishing tool positions. Using these results we simulate the corrective polishing process based on dwell time control. We calculate dwell time distributions and residual error of the polishing simulation method and the FFT calculation method. We test corrective polishing algorithm with an optical glass. The target removal shape is a sine wave that has amplitude 0.3 micro meters. We find this polishing process has a machining resolution of nanometer order and is effective for sub-micrometer order machining. This result will be used for the software development of the CNC polishing system.

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.403-405
• /
• 2001

This paper presents the detection method of partial discharge in metal clad switchgear(MCS) using electromagnetic technique. Two antennas are located in the inside and outside of the MCS, and electromagnetic waves detected by these antennas are analyzed and compared by FFT method in order to identify an insulation abnormality. As a result of the experiment by the proposed method, we show the detection possibility for partial discharge in the MCS. The proposed method is expected to apply to insulation condition observation and an accident prevention in the MCS effectively.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.39-42
• /
• 2010

본 연구에서는 두 파장을 이용한 광적용적맥파(photoelectric plethysmography, PPG)의 시스템을 기반으로 산소포화도 및 다양한 맥파 관련 건강정보를 분석할 수 있는 시스템에 관하여 연구하였다. 광적용적맥파를 이용한 산소포화도 측정을 위해 서로 다른 두 파장의 빛을 이용하여 비 침습적 맥파 측정 방식으로 손가락 끝 부분에서 측정하고, 혈액 내 헤모글로빈의 빛 대한 광흡수도의 차이를 분석하여 검출하였다. 또한 정확한 분석을 위하여 두 파장의 빛을 순차적으로 제어하는 스위칭 기법을 사용하고, 조직을 통과한 두 파장의 빛을 분리하기 위하여 수광부에 시간의 차이를 두어 각 파장에 대한 광전용적맥파를 측정하였다. 본 연구에서는 산소포화도를 측정하기 위한 방법으로 서로 다른 두 파장을 이용한 광전용적맥파 측정기기를 설계하고, 측정 결과의 정확성 및 유의성에 대한 검증하였다.

• Journal of Integrative Natural Science
• /
• v.3 no.1
• /
• pp.43-48
• /
• 2010

본 논문은 지역 부분영상을 이용한 실시간 CCTV결합 시스템에 고나한 연구로써 프레임에 관한 결합 인식방법을 제안한다. 제안된 알고리즘은 기존에 비해 결합속도를 줄이고 이에 따라 전체적인 인식률을 높이는 것을 목표로 하고 있다. 기존 방법인 SIFT알고리즘은 특허가 있고 처리속도가 늦기 때문에 본 논문에서 개선된 지역영상 재생성 방식을 이용하여 실질적으로 CCTV 처리속도에 맞추어 속도를 높였다. 논문은 지역화 이미지를 이용하여 인식률과 속도를 바탕으로 전체적인 시스템 구현과 함께 알고리즘을 소개하는 것으로 구성되어 있으며 실제 실험을 통한 성능을 비교 평가 하였다. 실시간으로 동작하는 CCTV에 적용시킴으로 각각의 화면이 아닌 Inline System으로 감시자의 신체적 피로를 줄이고 경제적인 효과를 볼 수 있고 일반 사용자들도 쉽게 사용할 수 있는 저비용 시스템을 구축하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.169-172
• /
• 1999

Recently, the wavelet transform has been a new and powerful tool for signal processing. It is more suitable specially for the feature extraction and detection of non-stationary signals than traditional methods such as, the Fourier Transform(FT), the Fast Fourier Transform(FFT) and the Least Square Method etc. because of the characteristic of the multi-scale analysis and time-frequency domain localization. The wavelet transform has been developed for the analysis of PD pulse signal to raise in the progress of insulation degradation. In this paper, the wavelet transform was applied to one foundational method for feature extraction. For the obtain experimental data, a computer-aided partial discharge measurement system with a single acoustic sensor was used. If we are applying to the neural network method the accumulated data through the extracted feature, it is expected that we can detect the PD pulse signal in the insulation materials on the on-line.