• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.117-117
• /
• 2016

일반적인 박막 성장용 CVD는 막 성장 시간이 짧게는 수분에서 수시간 정도 소요하기 때문에 장비에 문제가 발생 할 시 조치를 취하고 다음 현상을 개선하기에 용이 하였다. 그리고 대분분의 장비가 국산화되어 있을 만큼 많은 경험치가 축척되어 있다. 그러나 2, 4 족 화합물 성장용 CVD는 고아학 렌즈 생산용 장비로 국내에서는 아직 생소하고 공정 경험이 없는 새로운 장비이다. 2,4 족 화합물의 특징은 다음과 같다. 2,4 족 화합물은 M, N 이라는 두가 물질이 결합하여 형성한다. 2,4 족 화합물은 높은 융점과 낮은 증기압을 갖니다. 이런 물질들은 고온에서 아래와 같이 평형적으로 반응한다. $$nMN_{(s)}=nM_{(g)}+Nn_{(g)}$$ 화합물인 $MN_{(g)}$의 상태로 존재할 수 있으나 일바적으로 n=2인 4족 원소의 2원자 분자로된 기체가 지배적이다. 증기상을 이용한 성장 공정에서는 구성 원자나 분자를 만들어내는 단계, 이들을 공급원에서 기판까지 수송하는 단계, 기판 위에 흡착하는 단계, 핵의 생성과 단결정을 생성하는 단계, 필요치 않는 구성물을 제거하는 단계를 거쳐 공정이 진행 된다. 각 공정은 성장 물질에 충분한 자유도를 주어야하고 자유도를 주기 위해서는 많은 열에너지가 공급 되어야 한다. 따라서 기존의 박막 성장 공정 보다 성장 속도가 느리고 증착하는 양보다는 버리는 양이 많으며 버려지는 성장물질들은 급격한 온도 변화가 생기는 곳에서 급격히 증착하기 시작한다. 본 성장 공정이 진행되는 압력은 30 torr 부근이며 공정 온도는 $1000^{\circ}C$ 부근이다. 30 torr 영역에서는 열전달이 대기압과 같은 속도로 진행되기 때문에 지속적으로 온도에의해 손상을 받는 부위가 있을 수 있다. 높은 공정 온도와 높은 공정 압력은 내부 구조물로 발생된 열을 빠르게 장비 표면으로 수송하게 되고 그 결과 장비의 연결 부분에 장착된 오링에 손상을 주게 된다. 오링 손상을 방지 하기위해 냉각수 라인을 형성하여 오링을 보호하게 되면 열역학적 기울기가 급격히 발생하는 부분이므로 CVD의 반응 부산물들이 빠른 시간동안 증착하게 되고 막히는 현상이 발생하게 된다. 목표한 두게까지 박막을 성장시키기 위해서는 장시간 공정이 필수이며 장시간 공정을 안정적으로 가져가지 위해서는 배기 라인의 막힘 현상을 해결하여야 한다. 본 논문에서는 막힘 현상의 진행을 시간에 따라 해석하였으며 장시간 공정을 진행하기위해 필요한 요소와 기구적으로 조치가 가능한 방법에 대해 작성하였다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.6
• /
• pp.619-623
• /
• 2008

A lane detection system is one of the major components of intelligent vehicle systems. Difficulties in lane detection mainly come from not only various weather conditions but also a variety of special environment. This paper describes a simple and stable method for the broken lane tracking in various environments. Probabilistic Hough Transform (PHT) and the Least-square method (LSM) are used to track and correct the lane orientation. For the efficiency of the proposed method, two regions of interest (ROIs) are placed in the lower part of each image, where lane marking areas usually appear with less intervention in our system view. By testing in both a set of static images and video sequences, the experiments showed that the proposed approach yielded robust and reliable results.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.459-465
• /
• 1996

Bacillus thuringiensis serovar. darmstadiensis produced bipyramidal endo-toxin. The toxin protein was purified by Renografin-76 step gradient centrifugation and investigated by electron microscope. Analysis of total plasmid DNA patterns showed that four different size of plasmids existed in wild type B. thuringiensis serovar. darmstadiensis. Total plasmids DNA was isolated and transformed into pst I site of pBR322 cloning vector. Ten clones containing crystal toxin gene were forst screened colony hybridization by using PUYBT 9044 probe ontained B. thuringiensis kurskaki HD 1 toxin gene. Cloned-DNA was digested with EcoR1 and HindIII and transformed to pIBI30 sequencing vector. Finally, 2.6kb and 3.6kb size fragments contatined toxin-gene were cloned with restriction analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1923-1932
• /
• 2008

In this paper, We suggest a method, which extract the 3-Dimension location coordinate of object, stat and coil, using Laser sensor. In order to extract the 3-Dimension location coordinate of object, First, we extract the edge of object. Second, extract the z-axis angle of Laser sensor. Third, extract the 2-Dimension location coordinate of object using edge of object and z-axis of Laser senor. Fourth, discriminate between Slat and Coil. The result of study is expected that the help which is considerable to the automation system development of unmanned transportation equipment will become.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.1
• /
• pp.81-89
• /
• 2009

To support dynamic Region-of-Interest(ROI) in JPEG2000, a fast ROI mask generation is needed. In the existing methods of ROI coding, after scanning all the pixels in order and discriminating ROI, an ROI mask has been generated. Our method scans 4 pixels of the corners in one code block, and then based on those informations, scans the edges from the corners to get the boundaries of ROI and background. These informations are consisted of a distributed information of ROI and two coordinates of the pixels, which are the points the edges and the boundaries meet. These informations are transmitted to encoder and supported for fast ROI mask generation. There were no great differences between the proposed method and the existing methods in quality, but the proposed method showed superiority in speed.

• Journal of the Korean Society of Radiology
• /
• v.18 no.3
• /
• pp.231-237
• /
• 2024

Brain injury causes persistent disability in survivors, and epidural hematoma(EDH) and subdural hematoma (SDH) resulting from cerebral hemorrhage can be considered one of the major clinical diseases. In this study, we attempted to automatically segment and hematomas due to cerebral hemorrhage in three dimensions based on computed tomography(CT) images. An improved GVF(gradient vector flow) algorithm was implemented for automatic segmentation of hematoma. After calculating and repeating the gradient vector from the image, automatic segmentation was performed and a 3D model was created using the segmentation coordinates. As a result of the experiment, accurate segmentation of the boundaries of the hematoma was successful. The results were found to be good even in border areas and thin hematoma areas, and the intensity, direction of spread, and area of the hematoma could be known in various directions through the 3D model. It is believed that the planar information and 3D model of the cerebral hemorrhage area developed in this study can be used as auxiliary diagnostic data for medical staff.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.73-82
• /
• 1997

Regional myocardial blood flow (rMBF) can be noninvasively quantified using N-13 ammonia and dynamic positron emission tomography (PET). The quantitative accuracy of the rMBF values, however, is affected by the distortion of myocardial PET images caused by finite PET image resolution and cardiac motion. Although different methods have been developed to correct the distortion typically classified as partial volume effect and spillover, the methods are too complex to employ in a routine clinical environment. We have developed a refined method incorporating a geometric model of the volume representation of a region-of-interest (ROI) into the two-compartment N-13 ammonia model. In the refined model, partial volume effect and spillover are conveniently corrected by an additional parameter in the mathematical model. To examine the accuracy of this approach, studies were performed in 9 coronary artery disease patients. Dynamic transaxial images (16 frames) were acquired with a GE $Advance^{TM}$ PET scanner simultaneous with intravenous injection of 20 mCi N-13 ammonia. rMBF was examined at rest and during pharmacologically (dipyridamole) induced coronary hyperemia. Three sectorial myocardium (septum, anterior wall and lateral wall) and blood pool time-activity curves were generated using dynamic images from manually drawn ROIs. The accuracy of rMBF values estimated by the refined method was examined by comparing to the values estimated using the conventional two-compartment model without partial volume effect correction rMBF values obtained by the refined method linearly correlated with rMBF values obtained by the conventional method (108 myocardial segments, correlation coefficient (r)=0.88). Additionally, underestimated rMBF values by the conventional method due to partial volume effect were corrected by theoretically predicted amount in the refined method (slope(m)=1.57). Spillover fraction estimated by the two methods agreed well (r=1.00, m=0.98). In conclusion, accurate rMBF values can be efficiently quantified by the refined method incorporating myocardium geometric information into the two-compartment model using N-13 ammonia and PET.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1829-1834
• /
• 2006

In this raper in order to recover sharp object boundaries we propose a new efficient stereo matching algorithm in which window size is varied to the distance from the boundaries of object. To this end, the processing region is divided into small subregions with a same area and the disparities of the center pixels in the subregions are calculated using a area-based algorithm with multiple windows. From the this disparity map we can find the edges of the contracted objects. The disparities of original image are obtained using the gradient constraint that means the disparity of the center pixel is similar to the ones of the remaining pixels in the subregion. from the experimental results it is found that the proposed algorithm is very good for recovering sharp object boundaries compared to the similar different algorithm.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.623-632
• /
• 2008

In this paper, we used the color transfer function and the opacity transfer function for the internal 3D object visualization of an image volume data. In transfer function, creating values of between boundaries generally is ambiguous. We concentrated to extract boundary features for segmenting the visual volume rendering objects. Consequently we extracted an image gradient feature in spatial domain and created a multi-dimensional transfer function according to the GPU efficient improvement. Finally using these functions we obtained a good research result as an implementing object boundary visualization of the graphic hardware based 3D texture mapping.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.162-163
• /
• 2006

XLPE is used to insulator for Ultra High Voltage power cable. It is easy to processing also has a good insulating property. The study for diagnosis of lifetime and improvement is proceeding continuously. In this paper, it is investigated partial discharge distribution according to slope of needle electrode 0, 20, $40^{\circ}$. Applied voltage is 0.5 [kV/s] by step form for inception voltage. As the result of study, we conformed that increase of slope led to reduce of discharge number and total discharge quantity.