• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.128-137
• /
• 2012

In high multistory buildings, hybrid coupled shear walls can provide an efficient structural system to resist horizontal force due to wind and seismic loads. Hybrid coupled shear walls are usually built over the whole height of the building and are laid out either as a series of walls coupled by steel beams with openings to accommodate doors, elevator walls, windows and corridors. In this paper, the behavior characteristics of hybrid coupled shear wall system considering connection details is examined through results of an experimental research program where 5 two-thirds scale specimens were tested under cyclic loading. Such connections details are typically employed in hybrid coupling wall system consisting of steel coupling beams and reinforced concrete shear wall. The test variables of this study are embedment length of steel coupling beam and wall thickness of concrete shear wall. The results and discussion presented in this paper provide fundamental data for seismic behavior of hybrid coupled shear wall systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1370-1375
• /
• 2001

Substructure coupling or component mode synthesis may be employed in the solution of dynamic problems for structure. The model is partitioned into several subdomains. and a generalized Craig-Bampton representation is derived. In this paper the mode sets(normal modes. constraint modes) have been employed for model reduction. A generalized model reduction procedure has been described. Those reduction methods which adapt constraint modes have been described in detail. As examples. a flexible structure and a 10 DOF damped system are analyzed. Comparison with a conventional reduction method based on a complete model has been made via eigenpairs and dynamic responses.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.839-842
• /
• 2009

통신선에 장애를 유발할 수 있는 전자유도 대책을 위해서 국가 기술기준에 의한 유도전압 한계치가 정해져 있고, 현장 유도 대책 상 이 제한치를 초과할 때에 필요한 것이므로 정부 고시의 기술 근거에 의해 유도전압을 계산하여 이에 대한 조치를 시행하고 있다. 전자유도 현상에 있어서 피유도원인 통신선간의 커플링 관계에 있어서 중간 차폐를 줄 수 있는 성분에 대한 계수치를 적용할 수 있다. 이러한 차폐성을 줄 수 있는 시설과 관련하여 여러 가지 기유도원 또는 피유도원 시설 구조상의 요소들에 대한 차폐치가 주어져 있다. 그러나 지중 매설물에 대한 차폐효과에 대하여는 별도로 제시되지는 못하고 있다. 이와 관련 지중 매설물 중 광역상수도관에 의한 차폐성을 확인하기 위한 현장 측정을 통하여 비교 연구하였다. 유도원과 병행하여 광역상수도관이 매설된 지역에서 광역상수도관이 병행하는 부분과 일정 정도의 이격되어 병행하는 부분의 경계점에서 양단에 발생하는 유도 전압을 동시 비교 측정함으로써 그 차폐효과에 대한 현장 데이터를 확보하였다. 현장의 여러 조건변수들의 종속성을 정규화하고 광역상수도관의 독립적 변수에 의한 차폐성을 분석하여 제시한다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.82-92
• /
• 2022

This study aims to investigate the effect of total electrochemical cell resistance (TECR) on electrochemical impedance (EI) measurements of reinforced concrete (RC) by electrochemical impedance spectroscopy (EIS) using a three-electrode system. A series of experimental study is performed to measure electrochemical behavior of a steel bar embedded in a concrete cube specimen, with a side length of 200 mm, in various experimental conditions. Main variables include concrete dry conditions, coupling resistance between sensing electrodes and concrete surface, and area of the counter electrode. It is demonstrated that EI values remains stable when the compliant voltage of a measuring device is sufficiently great compared to the potential drop caused by TECR of concrete specimens. It is confirmed that the effect of the coupling resistance of TECR is far more influential than other two factors (concrete dry conditions and area of the counter electrode). The results in this study can be used as a fundamental basis for development of a surface-mount sensor for corrosion monitoring of reinforced concrete structures exposed to wet-and-dry cycles under marine environment.