• Journal of the Korean Geotechnical Society
• /
• v.27 no.11
• /
• pp.17-25
• /
• 2011

In this study, we considered the bearing capacity of strip footing over clay layers partially replaced by sand. The FEM analysis is performed to calculate the ultimate bearing capacity. Partial replacement is defined by multiples of footing width(B) and inclination of sides. The cases(B'=inf.) of sand layers equal to clay layers are preferentially conducted. The baring capacity of B'=inf. is comparative value for bearing capacity of partial replacement layers. ${\beta}$ is the ratio of ultimate bearing capacity of B'=inf and partial ultimate bearing capacity replacement. ${\beta}$ is used to analyze the characteristic of bearing capacity of clay layers partially replaced by sand. Each of the three undrained shear strengths of clay and friction angles of sand is considered. The result of this analysis shows that ${\beta}$ depends on sand depth.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.10
• /
• pp.777-788
• /
• 2006

This paper describes a displacement mapping technique which represents protruded shapes on the surface of an object. Previous approaches for image-based displacement mapping can represent only shapes depressed from the polygon surface. The proposed technique can represent shapes protruded from the underlying surface in real-time. Two auxiliary surfaces which are perpendicular to the underlying surface are added along the boundary of the polygon surface, in order to represent the pixels which overflow over the boundary of the polygon surface. The proposed approach can represent accurate silhouette of protruded shape. It can represent not only smooth displacement of protruded shape, but also abrupt displacement such as perpendicular protrusion by means of adding the supplementary texture information to the steep surface of protruded shape. By per-pixel instructions on the programmable GPU this approach can be executed in real-time. It provides an effective solution for the representation of protruded shape such as high-rise buildings on the ground.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.490-498
• /
• 1993

A variety of methods for measuring the velocity from an image sequence use the relationship between the spatial and temporal gradients of image brightness function. In most situations, an additional constraint is required because the velocity is not determined uniquely by a above relationship. Horn and Schunch proposed a constraint that the velocity field should vary smoothly over the image. This requirement, however, forces the velocity field to vary smoothly even across motion boundaries. To complement this probe, Nagel introduced and 'oriented smoothness' constraint which restricts variations of velocity field only in directions with small or no variation of image brightness function. On the other hand, Paquin and Dubois proposed a different type of constraint that the velocity is constant in a small area of image. But, this constraint also creates difficulties at motion boundaries which large variations in velocity field often occur. We propose the method to overcome these difficulties by utilizing the information of discontinuities in image brightness function, and present the experimental results.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.49-55
• /
• 2020

Experimental investigations were conducted to understand the multi-staged combustion characteristics of a swirl-stabilized double cone premixed burner nozzle used for industrial gas turbines for power generation. Multi-staged combustion is implemented by injecting the fuel through the existing manifold of the side slots as well as through the apex of the cone with two fuel injection angles which are slanted or axial. NOx and CO emissions, and wall temperature distributions were measured for various fuel distributions and operating conditions. Results show that NOx emissions are decreased when the fuel distribution to the apex is 3% of the total amount of fuel, which is due to more uniform fuel distribution inside the nozzle, hence less hot spots at the flame. NOx emissions are rather increased when the fuel distribution to the apex is 8% of the total amount of fuel for axial fuel injection by occurrence of flash back in premixing zone of burner.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.1
• /
• pp.97-103
• /
• 1993

This paper presents a quasi-analytical method using integral equations to obtain head distributions in unsaturated porous media with different hydrogeologic properties. One-dimensional soultion algorithms were developed for two cases of boundary conditions at the top: 1) constant head and 2) constant flux. Water table elevation at the bottom was assumed known for both cases. The methodology was applied to a fly ash disposal facility in an alluvium area. The results showed that the pressure head distributions had high nonlinearity with large gradients slightly above the interface of two media which made preliminary numerical solutions implausible. The developed method helped to structure finite element grids for improving convergence and accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1585-1589
• /
• 2009

최근 빈발하는 국지성 호우나 태풍에 의한 집중호우로 도시지역의 내배수불량으로 인하여 저지대 및 지하공간의 침수현상이 빈번히 야기하고 있는 실정이다. 특히 연안이나 외수위의 영향으로 강제배수가 요구되는 지역인 경우에는 개발에 앞서 선결해야할 중요한 재해저감대책 중의 하나이다. 이에 본 연구에서는 연안의 해수면 및 하천 홍수위로 인한 계획단지 내 배수관로의 동수위 산정을 위한 유출모의를 수행하였다. 연안저지대의 순성토 지역인 경우 동수위 계산에 따른 성토량에 의한 비용이 전체 공사비 결정 요인의 가장 큰 부분을 차지하고 있으므로 이에 따른 경제적이면서 치수안전도를 증가시킬 수 있는 계산 방법을 정립하는 것은 선결되어야 할 문제이다. 이를 위해 도시유역에 범용적으로 사용되고 있는 SWMM 모형을 활용하였다. SWMM 모형 중에서 EXTRAN 블록을 통한 유출모의는 관거내 동수경사를 계산하여 배수, 역류, 압력류, 월류까지도 모의할 수 있다. 다양한 조건으로 배수관로의 설계를 통한 동수위와 성토고를 분석하여 조건별 경제성과 치수안전도를 검토할 수 있으나 관로 크기, 경사, 방향 등을 우선하여 변경해가면서 최적안을 확인하였다. 검토된 계산 절차에 따라서 향후 지형적으로 유사한 지역에서의 배수시스템 설계에 적용 및 기존 배수관망 재설계 및 확장 등의 검토에 효과적으로 적용할 수 있을 것이다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.8 no.1
• /
• pp.23-30
• /
• 2005

A numerical scheme is proposed which is applicable to the evaluation of wave field containing floating structures, and the method is utilized to estimate the effect of the floating breakwaters to be installed in Wonjeon port near Masan. The model is based on the mild-slope equation which is widely accepted for the calculation of wave modulation near shores and an additional term is introduced to consider the wave scattering associated with the thin floating structures such as floating breakwaters. The tranquility in Wonjeon port with the floating breakwater in the east side is calculated and compared with the one with a bottom-fixed breakwater. The present method is believed to provide an efficient way of quantitative measurement of the performance of floating breakwaters.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.631-638
• /
• 1995

In this study, mechanical characteristics test of Functionally Gradient Materia (FGM) was performed by means of Modified Small Punch (MSP) Test with FGM; NiCrAlY-8YSZ and PSZ-Ni. To determine fracture mechanic factor, it was carried out MSP test that has possibility with small specimen (10*10*0.5 mm$^{t}$ ) and AE test to analyze micro fracture mechanism. As a result, fracture behavior became varied from brittle fracture to ductile as the content of Ni(or NiCrAlY) composition was increased and fracture energy was increased too. AE characteristics demonstrated that AE technique can detect the onset of fracture processes and AE energy was suddenly increased in the vicinity of maximum load. Since Young's modulus, fracture stress and fracture toughness was determined by MSP test, it can be known that the composition of NiCrAly 75%/8YSZ25% has the best mechanical property and furthermore this result is supported with fracture surface observation.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.269-272
• /
• 2002

창원시 북면과 대산면 강변 여과 취수 지역에서의 탄성파 조사를 통한 충적 대수층의 특성 규명은, 탄성파 조사가 충적 대수층의 수리지질학적 정보를 획득하는데 매우 유용한 방법임을 보여주었다. 특히 굴절법 탐사는 충적층 지하수위 추정에 뚜렷한 효과가 있음을 보여주었으며, 고해상도 반사법 탐사의 경우도 퇴적 구조를 잘 반영하는 것으로 나타났다. 조사된 지역의 지하수위는 하천수위에 비해 약 2m 이상 높은 것으로 나타났으며, 이는 조사된 시기의 지하수가 하천 방향으로 거동하고 있음을 시사한다. 하천 방향의 지하수위 최대 경사는 약 2/100 였으며, 실제 전반적인 조사 지역내의 충적층 지하수위 수두 경사는 이보다 작은 값일 것으로 사료된다. 또한 점토 및 실트질 지층이 조사 지역에 협재하고 있으나 이들의 수평적인 연속성은 한계가 있어 대표적인 대수층인 자갈 혼재층이 부분적으로만 피압 상태에 있을 것으로 판단된다. 한편, 햄머 진원을 이용한 고해상도 반사법 탐사의 경우, 약 40m 전후 심도의 충적층 하부 기반암의 상부를 뚜렷하게 보여주기에는 한계가 있다고 판단되며, P파의 속도와 주파수 문제로 인한 수직 해상력의 한계는 S파 등을 활용한 조사를 통해 보완할 필요가 있다고 사료된다

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.228-228
• /
• 2020

과거 무분별하게 획일화되어 개발되었던 하천 개발 사업으로 인해 수질오염과 생태계 훼손으로 하천의 건천화 현상이 발생함에 따라 최근 하천복원 사업이 적극적으로 계획·추진되고 있다. 수생태계의 건강성과 종적 연속성을 회복하기 위한 하천복원사업에 앞서 하천환경의 현상태에 대한 평가는 매우 중요한 부분이다. 유럽과 미국에서는 드론을 활용하여 하천관리 및 재해 피해조사가 활발하게 이루어지고 있었다. 국내의 센서기술과 무선통신 기술의 발전으로 인해 실시간 수집 가능한 정보의 범위가 늘어남에 따라 국내 하천환경 분야에서는 드론을 활용하여 획득된 원격탐사(RS) 자료와 지리정보 데이터베이스를 접목한 하천 공간조사 연구가 증가하고 있는 추세이다. 본 연구에서는 2019년 국토부에서 제시한 하천환경 평가체계에 따라 국내 도시하천중 하천복원사업을 시행하였던 청미천 지역에 대해 현장 조사와 UAV 영상, 항공영상을 활용하여 하천환경평가 결과를 비교하고자 한다. 하천환경평가체계 지침서는 캐나다(2013) 온타리오 하천평가기법을 참조하였으며, 급경사/중경사/완경사로 구분되며 사전조사와 현장조사 야장으로 구성되나 본 연구에서는 물리 평가지표만을 대상으로 하였다. UAV를 이용하여 촬영한 영상을 PIX4D 프로그램을 활용하여 정합한 후 획득된 색체정보를 활용하여 하천환경평가를 실시하였으며, 항공영상은 국토지리정보원의 국토정보플랫폼 국토정보맵에서 다운받은 자료를 활용하였다.