• Journal of the Korean Electrochemical Society
• /
• v.7 no.2
• /
• pp.100-107
• /
• 2004

The nano or micro sized structures of conducting polymer had been prepared by synthesizing the desired polymer within the pores of template of nano or micro porous membrane filter. In this study, we had tried to fabricate conducting polymer microstructures on an electrode by using electrochemical deposition adopting template synthesis. Our attention was focused on two different things, attaching template on the electrode and fabricating microstructures only at limited areas of the electrode. A conducting polymer, PEDiTT (poly 3,4-ethylenedithi-athiophene) solution was blended with PVA(polyvinyl alcohol) solution and used as an conducting adhesive. After attaching template membrane, the electrode were immersed in 0.5M pyrrole in 0.1M KCI solution, and electrochemical polymerization was performed. The growth process of the microstructures studied by SEM. The electrochemical fabrication of conducting polymer was performed by using two-electrode system. A large working electrode and a micro scale disc electrode were used for the confined area synthesis. Polymerization potential was 4V in an electrolytic solution made of KCI in deionized water. The optimum polymerization conditions were, i.e. (4V/100sec) for $250{\mu}m$ electrode and (6V/30 sec) for $10{\mu}m$ electrode.

• Journal of Yeungnam Medical Science
• /
• v.7 no.2
• /
• pp.39-48
• /
• 1990

Congenital duodenal obstruction in the newborn infant may be due to a variety of causes. Duodenal obstruction often presents with bilious vomiting and upper abdominal distention. Diagnosis is usually established on plain x-ray of the abdomen by the classic finding of the double-bubble. In the period July 1986 to June 1990, 16 patients with congenital duodenal obstruction were operated and the following results were obtained. 1. Sixteen patients were comprised of 11 males and 5 females, the ratio of male and female was 2.2:1. 2. Thirteen patients(81%) had been admitted to our hospital during one month of life. 3. Congenital duodenal obstruction was in 16 cases; malrotation in eight(50%), annular pancreas in six(38%), type 1 atresia in one(6%), and wind-sock anomaly in one(6%). 4. There were two premature patients and six patients of small for gestational age. 5. Overall, bilious vomiting, occurring in three fourths, was the single most frequent presenting complaint. 6. Polyhydramnios occurred in two of the patients. 7. Diagnosis was possible with clinical symptom and simple abdomen. 8. The operative procedures performed were ; duodenoduodenostomy in five, duodenojejunostomy in two, excision of wind-sock membrane in one, and Ladd's procedure in eight. 9. A total of ten asociated congenital anomalies were found in six patients. 10. Postoperative complications occurred in five cases(31%).

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.438-443
• /
• 2002

본 연구는 수도작에서 토양과 식물체의 분광반사특성과 영상처리를 이용한 기계시각 잡초검출 센서를 개발하기 위한 기초연구로서 분류하고자 하는 대상체들의 분광반사율을 조사하여 주요한 파장을 선정하고 선정된 파장을 이용한 판별분석을 통해 각 대상체에 대한 분류 정확도를 중심으로 잡초검출 가능성을 조사하기 위하여 수행하였으며, 실험으로부터 얻은 결론은 다음과 같다. 1. 토양과 식물체를 구분하는데 효과적인 파장은 마른 토양의 경우 680 nm, 배수 토양에 있어서는 810 nm로 선정하였고, 토양을 배제한 후 벼와 잡초를 구분하기에 효과적인 파장은 580, 680 nm로 선정하였다. 2. 토양과 식물체를 구분하기 위한 판별분석 결과 2가지 토양상태 모두 식물체와 완전히 구분 가능한 것으로 나타났다. 벼와 잡초를 구분하기 위한 실험에서, 벼는 98%의 분류정확도로 구분이 가능하였고, 잡초는 83%의 분류정확도로 구분이 되는 것으로 나타났다. 따라서 차후 분광학적 원리를 이용한 센서를 제작할 때 본 연구에서 선택한 주요 파장과 판별함수를 이용하여 장치를 구성하고 알고리즘을 제작한다면 벼, 잡초, 토양을 효과적으로 구분이 가능할 것으로 판단되었다. 3. 컬러 CCD 카메라를 사용하는 경우에 있어 식물체와 토양을 구분하기 위해 3 종의 파장 중 630 nm 파장만의 이용을 고려하여 그 분류성능을 분석한 결과, 식물체와 토양은 소수의 관측치를 제외하고 완전히 구분이 가능했고, 벼와 잡초를 구분한 결과에서는 비교적 높은 분류능력을 가진 것으로 나타나 차후 컬러 CCD 카메라를 이용하여 장치를 구성하는데 좋은 기초가 될 것으로 판단된다. 배양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을

• Journal of Korean Society of Transportation
• /
• v.27 no.5
• /
• pp.97-111
• /
• 2009

Image-based traffic information collection systems have entered widespread adoption and use in many countries since these systems are not only capable of replacing existing loop-based detectors which have limitations in management and administration, but are also capable of providing and managing a wide variety of traffic related information. In addition, these systems are expanding rapidly in terms of purpose and scope of use. Currently, the utilization of image processing technology in the field of traffic accident management is limited to installing surveillance cameras on locations where traffic accidents are expected to occur and digitalizing of recorded data. Accurately recording the sequence of situations around a traffic accident in a signal intersection and then objectively and clearly analyzing how such accident occurred is more urgent and important than anything else in resolving a traffic accident. Therefore, in this research, we intend to present a technology capable of overcoming problems in which advanced existing technologies exhibited limitations in handling real-time due to large data capacity such as object separation of vehicles and tracking, which pose difficulties due to environmental diversities and changes at a signal intersection with complex traffic situations, as pointed out by many past researches while presenting and implementing an active and environmentally adaptive methodology capable of effectively reducing false detection situations which frequently occur even with the Gaussian complex model analytical method which has been considered the best among well-known environmental obstacle reduction methods. To prove that the technology developed by this research has performance advantage over existing automatic traffic accident recording systems, a test was performed by entering image data from an actually operating crossroad online in real-time. The test results were compared with the performance of other existing technologies.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.579-589
• /
• 2021

Five waterlogged wood artefacts were excavated from Suyeong-ri site in Hwaseong, South Korea. The aim of the present study was to identify the species and estimate the date of manufacture and the manufacturing method of these artefacts. The study also aimed to conserve the original shapes of waterlogged wood artefacts by using the vacuum freeze drying method. The two large waterlogged woods were identified as Ulmus spp. and Morus spp., whereas one of the three small waterlogged woods was identified as Abies spp. and the other two as hard pine. Radiocarbon dating using wiggle match dated the manufacturing of these wooden artefacts between BCE 8520-8490 or BCE 8470-8290 in the Neolithic age, and a similar period was also confirmed for seed excavated from a place close to the location where the waterlogged wood artefacts were excavated. The surface of waterlogged wood artefacts had several traces of manufacturing processes - traces of tearing and chopping - were observed. Based on these observations, it was confirmed that stone adz was used to make these wooden artefacts. Thereafter, the waterlogged wood samples were conserved by immersing them into PEG#4,000 of concentration in water from 10% to 40% at room temperature(15~25℃) and subjecting them to vacuum freeze drying. However, the internal moisture was not completely removed in some thick parts of waterlogged woods by applying the general schedule such as raising the shelf temperature as the surface temperature rises. Therefore, additional study is required using the schedule-method for vacuum freeze drying of large waterlogged wood.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.27 no.3
• /
• pp.144-157
• /
• 2022

Noble gases, which are chemically inert and behave conservatively in marine environments, have been used as tracers of physical processes such as air-sea gas exchange, mixing of water masses, and distribution of glacial meltwater in the ocean. For precise measurements of Ne, Ar, and Kr, we developed a mass spectrometric system consisting of a quadrupole mass spectrometer (QMS), a high vacuum preparation line, an activated charcoal cryogenic trap (ACC), and a set of isotope standard gases. The high vacuum line consists of three sections: (1) a sample extraction section that extracts the dissolved gases in the sample and mixes them with the standard gases, (2) a gas preparation section that removes reactive gases using getters and separates the noble gases according to their evaporation points with the ACC, and (3) a gas analysis section that measures concentrations of each noble gas. The ACC attached to the gas preparation section markedly lowered the partial pressures of Ar and CO₂ in the QMS, which resulted in a reduced uncertainty of Ne isotope analysis. The isotope standard gases were prepared by mixing ²²Ne, ³⁶Ar, and ⁸⁶Kr. The amounts of each element in the mixed standard gases were determined by the reverse isotope dilution method with repeated measurements of the atmosphere. The analytical system achieved precisions for Ne, Ar, and Kr concentrations of 0.7%, 0.7%, and 0.4%, respectively. The accuracies confirmed by the analyses of air-equilibrated water were 0.5%, 1.0%, and 1.7% for Ne, Ar, and Kr, respectively.

• Development and Reproduction
• /
• v.12 no.3
• /
• pp.297-303
• /
• 2008

BCL-2 family members are essential protein for the regulation of cell death and survival consisting both antiapoptotic and pro-apoptotic proteins. In the present study, we designed and cloned a new apoptotic molecule MCL-1ES BH3M coding a modified protein of MCL-1L. Compared to MCL-1L protein, MCL-1ES BH3M lacks the PEST motifs known to be involved in MCL-1L protein degradation and has seven mutated residues in BH3 domain critical for dimerization with BCL-2 family members. Overexpression of MCL-1ES BH3M induced death of different cells, and its cell killing effect was not blocked by forced expression of the pro-survival protein MCL-1L. Expression of MCL-1ES BH3M protein led to the activation of caspase 9 and caspase 3, suggesting apoptotic cell death, and confocal fluorescent microscopic analyses showed that MCL-1ES BH3M was partially localized in mitochondria. In conclusion, we reported a new apoptotic molecule and determined its cell death activity in cells.

• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.292-298
• /
• 2003

In this study, the photooxidation and ozonation of humic acid (HA) in aqueous solution were conducted and the treated HA samples at different reaction time were analyzed using ultrafiltration techniques to evaluate the change of their molecular size distributions with its DOC removal. Molecular size distribution of untreated HA showed 41.5% in higher molecular size fractions (>30,000 daltons) and 15.2% in much smaller molecular size fraction (<500 daltons). As UV irradiation time was increased, it was observed that the degradation of the large molecules of the fraction of >30,000 daltons into much smaller molecules was increased. In UV system, the HA molecules of the fraction of <500 daltons became significantly more and its percentage was increased from 35.3% (UV only irradiation) to 58.9% ($UV/TiO_2$) and 87.8% ($UV/H_2O_2$) in the presence of the photocatalysis. Otherwise, ozonation of HA produced mainly the fraction of medium molecular size ranging from 3,000 to 30,000 daltons with much lower portion (<~7%) in the fraction of <500 daltons. In ozone only system, the fraction of 30,000~10,000 daltons occupied in 41.5% at 60 min of ozonation time. In $O_3/H_2O_2$ system, the fraction of 30,000~10,000 daltons and 10,000~3,000 daltons occupied in 38.9% and 36.2% respectively. Based on these results, we suggested applicable treatment process which could be combined with $UV/H_2O_2$, $UV/TiO_2$ and $O_3$, $O_3/H_2O_2$ system for more effective removal of humic acid in water treatment.

• Development and Reproduction
• /
• v.14 no.4
• /
• pp.281-286
• /
• 2010

Recent evidence has revealed that the intratesticular injection of hypertonic saline(20%) resulted in a chemically castrated state such as nadir testosterone levels in rats. To confirm the efficacy of this simple saline-injection method further, we investigated the changes in the gross and microscopic anatomy of testis. Our study comprised three groups; intact(control) group, orchidectomy group and saline-injection (experimental) group. Single dose of hypertonic saline (sterilized, $750{\mu}{\ell}/testis$) were directly administered into both testis of adult rats (about 300 g BW). Bilateral orchidectomy was performed at the same day of saline injection. Following 30 days post-injection, reproductive tissues were surgically removed, weighed and fixed for histological examination. The body weights were not changed in both orchidectomy group and saline-injection group when compared to those in intact group. The wet weights of testis were significantly decreased in saline-injection group when compared to those in intact group. The wet weights of epididymis and seminal vesicle and prostate were significantly decreased in orchidectomy group and saline-injection group when compared to those in intact group. Macroscopically, the testes exerted slight atrophy and the tunica albuginea seemed to be intact in saline injection group. Histologically, however, larger parts of testicular tissue underwent necrosis and were barely recognizable after hematoxylin-eosin staining. In the same section, only the opposite part of the injection site was stained showing abnormal state of cell layers mostly fibrosis and infiltrated leukocytes. Sloughing of immature germ cells from the basement membrane along with shedding cells in the intraluminal space was notable in most seminiferous tubules from the saline injected testis. The present study confirmed that the direct injection of hypertonic saline into testis can induce a castration-like, testosterone-depriving effects on accessory sex organs. Our findings suggest that the efficacy of this less expensive and minimally invasive method seems to be almost even with that of conventional orchidectomy and chemical castration, though more in-depth evaluation should be supported.

• Korean Journal of Materials Research
• /
• v.11 no.7
• /
• pp.556-561
• /
• 2001

We prepared a new a SOS(silicon-on-silicide) wafer pair which is consisted of Si(100)/1000$\AA$-NiSi Si (100) layers. SOS can be employed in MEMS(micro- electronic-mechanical system) application due to low resistance of the NiSi layer. A thermally evaporated $1000\AA$-thick Ni/Si wafer and a clean Si wafer were pre-mated in the class 100 clean room, then annealed at $300~900^{\circ}C$ for 15hrs to induce silicidation reaction. SOS wafer pairs were investigated by a IR camera to measure bonded area and probed by a SEM(scanning electron microscope) and TEM(transmission electron microscope) to observe cross-sectional view of Si/NiSi. IR camera observation showed that the annealed SOS wafer pairs have over 52% bonded area in all temperature region except silicidation phase transition temperature. By probing cross-sectional view with SEM of magnification of 30,000, we found that $1000\AA$-thick uniform NiSi layer was formed at the center area of bonded wafers without void defects. However we observed debonded area at the edge area of wafers. Through TEM observation, we found that $10-20\AA$ thick amourphous layer formed between Si surface and NiSix near the counter part of SOS. This layer may be an oxide layer and lead to degradation of bonding. At the edge area of wafers, that amorphous layer was formed even to thickness of $1500\AA$ during annealing. Therefore, to increase bonding area of Si NiSi ∥ Si wafer pairs, we may lessen the amorphous layers.