• The Journal of the Acoustical Society of Korea
• /
• v.5 no.1
• /
• pp.3-10
• /
• 1986

원통형 압전세라믹을 이용하여 2종류의 하이드로폰을 제작한 결과를 제시하고 있다.한 종류는 방사선 방향으로 단일 분극화된 압전소자의 양 끝을 금속캡으로 밀폐하여 제작되었고, 다른 종류는 신 호대 잡음비를 높이기 위해 원통형 소자의 전극을 4부분으로 나누어 교번 분극화하여 유기된 전압이 합 해지도록 제작하였다. 특성을 측정한 결과, 4- 교번 분극화된 하이드로폰이 단일 분극화된 경우보다 40Hz~1000Hz 주파수 범위에서 전기적 잡음 등가음 압이 평균 10dB정도 낮아지게 되어 그 성능이 향상 되었다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.10a
• /
• pp.52-53
• /
• 1995

전해질용액에 있는 이온교환막을 통해 전류가 흐를 때 막표면에는 경계층이 형성된다. 희석실쪽 막표면에서 전해질의 농도는 감소하고 농축실쪽에서 증가 하는 농도분극현상이 일어난다. 이와 같은 농도분극현상은 전류밀도에 벼놔를 주어 에너지 소비를 증가시키고 막표면에 스케일을 형성할 수도 있다. ED에서는 농축실보다는 희석실쪽의 농도분극현상이 더 많은 관심을 갖게 되며 이 부분 연구가 활발하게 진행된다. 따라서 전기 투석을 이용한 물질분리는 항상 한계전류밀도이하에서 이루어져야 하는데 i$_{lim)$은 막자체의 성능 외에도 용액의 종류및 농도, 온도, pH, 전압등에 의해 변화한다. 따라서 i$_{lim)$이 각 변수에 의해 얼마만큼 변화하는지를 살펴봄으로써 임의의 환경에서 i$_{lim)$을 추정할 수 있는 모델을 제시하고자 한다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.3
• /
• pp.211-217
• /
• 2003

Recently, with rapid development in marine and shipbuilding industries such as marine structures, ships and chemical plants for ship, there occurs much interest in the study on corrosion characteristics played an important role in mechanical design. This paper was studies on the corrosion characteristics of chromium plating in the marine environment. Under the various specific resistance, the electrochemical polarization test of chromium plating was carried out. And thus corrosion potential, polarization resistance, corrosion current density, control efficiency of corrosion and polarization control behavior of chromium plating are investigated. The main results are as the followed : 1. The polarization resistance of Cr plating and Ni become higher than that of base metal, also and these material become low with decrease of the specific resistance. 2. As the specific resistance decreases, the corrosion current density of Cr and Ni plating is lower than that of base metal. 3. The corrosion reaction of Cr plating, Ni plating and base metal vs. specific resistance is cathodic control.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.6
• /
• pp.569-576
• /
• 2012

In general, aluminum alloys forms the passive film($Al_2O_3$, $Al_2O_3{\cdot}3H_2O$) in neutral solution. However, the passive film created on the surface will be destroyed by chloride ions contained in sea water so the corrosion will occur. In this study, in order to solve the problem of corrosion under a seawater environment, potentiostatic protection techniques were applied to Al-4.5%Mg-0.6%Mn aluminum alloy in seawater. At polarization experiments, active state were observed at anodic polarization and concentration polarization by reduction of dissolves oxygen and activation polarization were found at anodic polarization. As a results of potentiostatic experiment, calcareous deposit were created much more as applying time increase from the turning point of the concentration polarization and activation polarization and crevice corrosion was partially observed between calcareous deposit and surface of base metal. Overall potentiostatic anodic polarization experiment was difficult to apply potentiostatic corrosion protection technology by occurrence of active state, whereas potentiostatic cathodic polarization experiment examined optimum corrosion protection condition of -1.1 V~-0.75 V within the range of concentration polarization considered various applying time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2065-2070
• /
• 2010

The diluted PMMA treated $SiO_2$ films as an passivation materials for semiconductor devices was researched by using the FTIR spectra. The diluted PMMA solution with various ratios changed the surface of $SiO_2$ film as the hydrophilic, hydrophobic or hybrid type properties. The sample 7 with little carbon content showed dramatically the chemical variation by the FTIR spectra analysis. Beacuse the little carbon with electrons decreased the polarity and surface energy on the $SiO_2$ film, and then became a stable bonding structure and decreased the leakage current. The FTIR spectra can define the detail variation due to the chemical reaction on the organic thin film, and help to research the characteristic of the organic materials.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.125-131
• /
• 2001

A long-term variation of electrode polarization in the MCFC has been analyzed successfully using a single cell with a Au, $CO_2/O_2$ reference electrode Four different cells with different components were operated and their electrode polarizations were analyzed. As published in the literatures, the cathode polarization was larger than that of the anode. The more stable operation of a single cell with the Al-coated cell frame up to 6,000hrs indicates that the corrosion at the cell frame, particularly wet seal area, plays an important role to determine the lifetime of a MCFC. At the initial stage of the cell operation, the voltage of the cell using a cathode stabilized by the $LiCoO_2$ coating was relatively low due to the high cathode polarization. As the cell was operated and the stabilized cathode was lithiated sufficiently, the cathode polarization decreased and the cell voltage was recovered. It was observed that the voltage of the cell using the $Li_2CO_3/Na_2CO_3$ electrolyte fluctuated with operation time and the cathode polarization fluctuated along with the cell voltage quite similarly. Although the mechanisms of the voltage fluctuation were not clear yet, the results imply that the voltage fluctuation was related with a reaction in the cathode side. After testing every single cell, the cathode polarization increased with the steep decrease in the cell voltage. Thus, the cathode should be improved in order to develop more durable MCFC.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.66-72
• /
• 2000

In these days, with development of industry, the use of machines and structures like ships, airplanes, bridges, power plants, and structure for construction has increased and these machines and structures are used in various corrosive environment. Especially, in case of STS 304, which is material for every kind of machine and chemical plant, it makes many problems related with corrosion and as a result of this, there are happening tremendous economic loss. Therefor, in this study, the test for polarization characteristics was carried out to study characteristics of crevice corrosion of STS 304 which is austenitic stainless steel, in NaCl environment.The main results obtained are as follows :1) Part of crevice is corroded, neighboring outside surface of crevice is passivation. 2) In polarization behavior, corrosion potential of STS 304 become more noble as the concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5% that of STS 3.4 become less noble. 3) The current density under corrosion potential was high drained as concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5%, the current density was low drained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05d
• /
• pp.113-118
• /
• 2003

투어멀린(Tourmaline)은 비대칭 쌍극자를 가진 천연 유극성 결정체로 광물 중에서 영구전기분극을 띄고 있는 유일한 물질로써 일명 "전기석"이라고 알려져 있다. 분극에 의한 자체 미약전류(약 $60{\mu}A$)와 함께 음이온 및 원적외선의 발생으로 최근 우리주변에서 건강과 환경을 위한 관심고조의 대상인 육방정계의 압전성 및 초전성을 띄는 붕규산염(주요성분: Mg, Fe, B, Si, Ca)으로, 투어멀린 원석이나 그 복합세라믹체의 면역지수가 ~1000에서 ~400,000 이상인 점을 비롯하여 그 유용성을 이용하려는 새로운 아이디어 신상품들이 계속 개발되고 있다. 뿐만 아니라 물분자를 만나면 수소$(H^+)$와 수산기 $(OH^-)$로 전기분해 하여 친수기와 소수기 부분으로 구분하며, $H^+$와 $OH^-$는 각각 $H_2O$와 결합하여 활성이 강한 hydronium ion$(H_3O^+)$을 생성하고, 물 속에서 계속 불안정한 상태로 존재하는 수산기는 계면활성 작용이 있는 hydroxyl ion$(H_3O_2^-)$을 형성하여 물을 약 알카리성 (pH~7.4)으로 바꿔주며, 물분자 클러스터 세분화와 미네랄을 용출, 공급하여 이 물이 체내에 흡수되면 살균, 항균성의 면역기능을 갖게 되며, 혈액정화 기능과 자율신경 자극으로 교감신경의 흥분을 억제해 준다. 이와 함께 전기분극을 띈 투어멀린 입자는 다른 물질에 비하여 경이적 수치의 원적외선을 발생하여 강력한 열 효과와 높은 침투력으로 인체의 혈액순환 촉진과 혈전용해 작용을 주어 건강과 활력에 도움을 주는 것으로 확인되어 많은 관심을 끌고 있다. 따라서 유익한 이용가치를 인정받고 있는 천연 투어멀린을 단독 형태나 또는 서로 상승효과를 줄 수 있는 유용한 타 물질과 혼합물을 구성하여 성형 또는 EPD 방법으로 전착한 후 소결 처리하여, 소결체의 특성 분석과 함께 물에 대한 전기 화학적 작용 및 항균 효과를 조사, 확인하여 수질개선 효과를 분석하고 그 응용성을 개발, 확보하였다.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.04b
• /
• pp.45-47
• /
• 1997

정밀여과 및 한외여과에 의해 단백질 등과 같은 거대분자 물질을 분리정제할 경우 피할 수 없는 문제점은 막에 의해 분리된 거대부자들이 막표면에 쌓이는 농도분극(concentration polarization)현상과 이 누적된 거대분자가 막과의 상호작용에 의해 막표면 또는 막세공 내에 비가역적으로 침적되는 막오염(membrane fouling)현상이 일어난다는 점이다. 특히 막표면 또는 막세공 내에 분리대상 물질이 비가역적으로 침적되어 발생되는 막오염은 상대적으로 가역적 침적 과정인 농도분극보다 제어 또는 억제가 어려워 최근의 막분리 분야 연구의 상당 부분이 막오염 유발요인의 해석, 막오염을 효율적으로 제어 또는 억제하기 위한 방법의 연구에 집중되고 있다. 본 연구에서는 단백질 용액의 정밀여과시 단백질 변성이 막오염에 미치는 영향을 체계적으로 규명하기 위한 연구의 일환으로서 BSA를 분리대상 물질로하여, BSA용액을 미리 기계적 Shear(펌프 및 sonification), 열, 화학적 방법(pH 및 변성제)으로 변성시킨 후, 이 용액을 대상으로 회분식 정밀여과 실험을 수행하여 단백질 응집체 형성이 막투과량 감소에 미치는 영향을 실험적으로 검토하였으며, 각각의 막투과량 감소 특성을 아래의 4가지 blocking filtration law로서 해석하였다: complete blocking law, intermediate blocking law, standard blocking law, cake filtration law.

• Electrical & Electronic Materials
• /
• v.7 no.1
• /
• pp.32-41
• /
• 1994

In this study, the TSC spectroscopy has been applied to investigate the influence of structural change due to a process of curing reaction on the electrical properties of epoxy composites cured with acid-anhydride. Five TSC peaks appeared in -160-250[.deg.C]: in the low temperature region below glass transition temperature(T$\_$g/), three relaxation mode peaks due to action of side chains, substitution group or terminal groups have been observed, a peak associated with T$\_$g/, appeared in 110[.deg. C] and p peak due to ionic space charges located in 150[.deg.C]. Each peak was separated into elementary peaks by the partial polarization procedure, and the distribution of activation energy and relaxation time were analized to clearify the origin of each peak. Also, overaboundantly added hardener separated a .betha. peak near 10[.deg. C] into two peaks of .betha.$\_$1/(10.deg. C) and .betha.$\_$2/(20.deg. C) according to increasement of forming field, and the separated hardener was oxidated thermally with increasing surrounding temperatures. The expansion of the free volume need in molecular motion and the reduction of the structural packing density through thermal oxidation process increased TSC between .alpha. peak and .betha. peak and decreased T$\_$g/.