• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1079-1085
• /
• 2013

Due to the limited power supply resources, it is essential that the minimization of algorithmic operation and the reduction of the hardware logical-resources in the design of the satellite transponder. It is also required that the transponder process the signals of various bandwidth efficiently, that is suitble for the SDR-based implementation. This paper proposes a variable rate down sampler which can provide variable bandwidth and data rate for carrier, ranging and sub-band command signals respectively. The proposed down sampler can provide multiple $2^M$ decimated outputs from a single half band filter with recursive arithmetic architecture, which can minimize the hardware resources as well as the arithmetic operations. The algorithm for hardware implementation as well as the analysis for the passband flatness and aliasing is presented and varified by the FPGA implementation.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.224.1-224.1
• /
• 2012

위성에 사용되는 전자광학카메라는 통상 광기계부와 광전자부 그리고 데이터 전송부로 구성된다. 본 논문에서는 광전자부의 일부 유닛인 카메라제어기의 개발내용을 다루었다. 카메라전자 제어기는 위성체로부터의 명령을 기반으로 광전자부의 가장 중요한 역할인 영상촬영을 비롯한 광전자부 전체의 동작제어, 내부의 텔레미트리 송신 그리고 전자광학카메라의 포커싱 등을 수행하게 된다. 논문에서는 먼저 광전자부 전체 블록 내에서, 개발중인 카메라제어기의 구조 및 기능 등에 대해 설명한다. 그리고 전자 제어신호에 의한 영상밴드간의 커플링을 없애기 위한 밴드간에 전기적으로 분리된 인터페이스에 대한 설명 및 초기 부팅과정과 포커싱제어와 관련된 설계내용 및 시험결과를 기술하였다.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.845-848
• /
• 2001

본 논문에서는 multipath 환경에서 효과적으로 시지연을 추정하기 위한 알고리즘을 제안하였다. 제안된 알고리즘은 전처리 과정으로 웨이블릿 변환을 적용하였으며, 적응 알고리즘으로는 RLS를 계층적인 구조로 나타낸 HRLS(Hierarchical RLS)를 사용하였다. 시지연은 신호 분해과정 이후 각각의 부밴드에서 primary 신호와 reference 신호 사이의 MSE(Mean of Squared Error)를 최소화 시키는 적응 메카니즘을 사용하여 추정하였다. 아울러 모의실험을 통하여 제안된 알고리즘의 성능을 검증하였다.

• Journal of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.92-97
• /
• 1975

The molecular and electronic structures of $TiCl(OC_6H_5)_3{\cdot}C_6H_5OH\;and\;Ti(OC_6H_5)_4{\cdot}C_6H_5OH$ have been studied by employing cryoscopic and electronic spectroscopic methods. The cryoscopic data have shown that the dimeric tetraphenoxytitanium(Ⅳ) phenolate in solid undergoes complete dissociation into monomer in solution and also the chlorocomplex starts dissociation around the concentration of 8 m mole/l. Therefore, these two Ti-complexes are pentacoordinated in dilute solution and the local symmetry of the titanium ion in these complexes seems to be trigonalbipyramid. The electronic spectra of $TiCl(OC_6H_5)_3{\cdot}C_6H_5OH$ and $Ti(OC_6H_5)_4{\cdot}C_6H_5OH$ each show two band, systems, one vibration-structural band characteristic of the aromatic ring in the near UV and another visible band at 26.8 kK, 29.6 kK, respectively, which are assigned as a ligand to metal charge transfer band corresponding to $^1A_1''{\to}^1E'\;or\;^1E''$ transition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.6 no.4
• /
• pp.267-271
• /
• 2013

A new structure of double-resonant cylindrical monopole is proposed for multiple band applications. Multiple band property for the proposed antenna is achieved by adjusting the coupling structure of the antenna base for a double resonance. Measured results of the proposed antenna are compared with those of wire and thick cylinder monopoles.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1113-1119
• /
• 2013

In this letter, a new approach is proposed for the design of a multi antenna for MIMO wireless devices. The proposed antenna covers various LTE(Long Term Evolution) service bands: band 17(704~746 MHz), band 13(746~787 MHz), band 5(824~894 MHz), and band 8(880~960 MHz). The proposed main antenna consists of a conventional monopole antenna with an inverted L-shaped slit for wideband operation. The proposed the LTE sub antenna is based on a switch loaded loop antenna structure, with a resonance frequency that can be controlled by capacitance of a logic circuit. The tuning technique for the LTE Rx antenna uses a RF MEMS(Micro-Electro mechanical system) to match the impedances to realize the bands of interest. Because the two proposed antennas are polarized orthogonally to each other, the ECC(Envelope Correlation Coefficient) characteristic between two antennas was measured to be very low (below 0.06) with an isolation characteristic below -20 dB between the two antennas in the operating overall LTE bands. The proposed antenna is particularly attractive for mobile devices that integrate LTE multiple systems.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.96-100
• /
• 2001

본 논문에서는 skeleton slot 복사기를 이용하여 GSM 900과 GSM 1800에서 사용할 수 있는 이중대역 안테나를 설계 및 제작하여 측정 결과를 비교 분서하였다. 기본적인 skeleton slot 구조에서는 낮은 밴드의 2배 이상의 주파수에서는 수평 빔폭이 일정치 않고, 정재파비 특성이 불량하였으나, 급전부와 측면 방사부분의 다중경로 형성 및 절곡 구조를 이용하여 이를 해결하였다. 안테나의 크기는 반사판이 190$\times$190(mm), 복사기는 154$\times$106(mm), 높이는 33mm로 하여 현재 서비스 사업자틀이 주로 사용하는 크기로 구성하였다. 구성 재질은 1mm 두께의 알류미늄판을 이용하며, 이를 NCT로 타공 및 절곡하여 제작하였기 때문에 대량 생산 시 단가를 낮출수 있다. 실측결과 900MHz 대역에서 13.7%, 1800MHz 대역에서 16.4%의 -l0dB 반사손실 대역폭을 만족하고, 방사패턴도 대역별로 $\pm$1$^{\circ}$이내의 일정한 양상을 보여 이중대역 안테나로서의 요구를 만족하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.65-68
• /
• 2008

This paper verified the lateral resisting capacity of CFT column-RC flat plate connection in comparison with general RC column-flat plate connection and detected moment capacity and ductility capacity of connection according to lateral force-displacement ratio. We made and tested specimens which have different variables respectively and as a result derive a following conclusion. In CFT specimen a critical section was extended and initial stiffness and moment increased 35%, 25$^{\sim}$35% respectively in comparison to general RC column specimen. In all specimens generally shear governed behaviors and in CFT specimen complemented with seismic band, flexure behavior region of slab was extended and also ductility ratio and energy absorptance increased.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.395-401
• /
• 2005

In this paper, the high-band codec for bandwidth scalable wideband speech codec is proposed. The wideband input speech signal is separated into low-band signal and high-band signal, and the low-band signal is encoded by the standard narrow-band speech codec and the high-band signal is encoded by the proposed codec. In the high-band codec. the signal is transformed into frequency domain by MLT on a subframe basis, and MLT coefficients are splitted into magnitude and sign for quantization. The magnitudes of MLT coefficients are arranged into several time-frequency bands and each band is quantized in 2D-DCT domain, where the low-band information is utilized for better performance. The sign of MLT coefficient is quantized based on a priority selection process with the weighting measurement. The objective and subjective performance of wideband speech codec including the proposed high-band codec is measured, and it is confirmed that the proposed codec has better performance than 32kbps G.722.1.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.41-46
• /
• 2023

Design of W-band TE10 to TEM mode converter for radial power combiner is proposed in this paper. The proposed structure is used with generally available pin to realize TEM mode and is designed to convert TE10 to TEM mode gradually using 2-step impedance transformer and back short. The pin of proposed mode converter is well bonded to the housing so that environment conditions such as vibration or shock are not affected. The proposed mode converter, in a back-to-back configuration, has less than 1.55 dB insertion loss and more than 10 dB return loss from 92.5 GHz to 97.7 GHz. Proposed converter is expected compact radar and various applications requiring for high power and stable environment conditions.