• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.304-310
• /
• 2004

Resistance performance of small size fishing vessel is experimentally investigated to find out the effect of fore-body shape and trim for the better hull from development. The tests are performed for five different cases in the high speed circulating water channel(CWC). Wave patterns are observed to investigate the relation between the resistance performance and the wave characteristics.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1459-1461
• /
• 2007

본 논문은 침수된 전기설비에 인체가 접촉하였을 때 인체 각 부위에 미치는 전기적 특성을 연구하였다. 인체 저항은 C. J. Andrews 가 제시한 모델을 기초로 하였으며, 침수액의 저항은 100[${\Omega}$], 1[$k{\Omega}$], 10[$k{\Omega}$]로 변화시켰다. 침수액의 저항을 변화시켜 ATP draw로 시뮬레이션 하여 인체 각 부위에 흐르는 전압, 전류를 측정하여 비교 분석 한 결과 충전부 촉수 전의 가슴 - 허리 사이에는 침수액 저항값이 증가 할수록 전류값이 감소하였으나, 충전부 촉수 후에는 오히려 증가하는 경향이 나타났다. 인체 각 부위별 전압값은 침수액 저항이 증가 할수록 감소하는 경향을 보였다.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.375-379
• /
• 2006

The keel attached on bottom of hull part prevents yacht from flowing sideway by sailing posture. The keel remove a heel moment and make the force of stability. The selection of suitable keel is important bemuse it has an influence on the safety. Also the appendage attached on bottom of keel part lower ballast weight center and have influence on hull stability. The optimum shape about the keel is very important. So this study has compared with characteristics of resistance depending on the shape of the lower part of fin keel in the same surface of water submersion, we have attached three different types of models of lower part of fin keels to the model ships using circulating water channel and analyzed resistance characteristics per shape to arrive at the optimum shape of reduction of resistance.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.235-239
• /
• 2006

The keel attached on bottom of hull part prevents yacht from flowing sideway by sailing posture. So this study has compared with characteristics of resistance depending on the shape af the lower part of fin keel in the same surface af water submersion, we have attached three different types of models of lower part of fin keels to the model ships using circulating water channel and analyzed resistance characteristics per shape to arrive at the optimum shape of reduction of resistance.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.3
• /
• pp.39-44
• /
• 2015

We investigated the effect of CNT-Ag composite pad on the contact resistance of flip-chip joints, which were formed by flip-chip bonding of Cu/Au chip bumps to Cu substrate metallization using anisotropic conductive adhesive. Lower contact resistances were obtained for the flip-chip joints which contained the CNT-Ag composite pad than the joints without the CNT-Ag composite pad. While the flip-chip joints with the CNT-Ag composite pad exhibited average contact resistances of $164m{\Omega}$, $141m{\Omega}$, and $132m{\Omega}$ at bonding pressures of 25 MPa, 50 MPa, and 100 MPa, the flip-chip joints without the CNT-Ag composite pad had an average contact resistance of $200m{\Omega}$, $150m{\Omega}$, and $140m{\Omega}$ at each bonding pressure.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.3
• /
• pp.385-395
• /
• 2011

The flexural strength of composite HSB hybrid I-girders under positive moment is investigated by the moment-curvature analysis method to evaluate the applicability of the current AASHTO LRFD design specification to such girders. The hybrid girders are assumed to have the top flange and the web fabricated from HSB600 steel and the bottom flange made of HSB800 steel. More than 6,200-composite I-girder sections that satisfy the section proportion limits of AASHTOL RFD specifications are generatedby the random sampling technique to consider a statistically meaningful wide range of section properties. The flexural capacities of the sections are calculated by the nonlinear moment-curvature analysis in which the HSB600 and HSB800 steels are modeled as an elastoplastic, strain-hardening material and the concrete as CEB-FIP model. The effects of ductility ratio and compressive strength of concrete slab on the flexural strength of composite hybrid girders make of HSB steels are analyzed. Numerical results indicated that the current AASHTO-LRFD equation can be used to calculate the flexural strength of composite hybrid girders fabricated from HSB steel.

• Journal of Venture Innovation
• /
• v.4 no.3
• /
• pp.89-108
• /
• 2021

This study purposed to investigate the double mediating effect of the resistance and the job stress between the acceptance and the flourishing in organizational change. The survey has executed on 300 employees. The acceptance of organizational change was positively related to the flourishing, negatively to the resistance of organizational change and the job stress. The resistance of organizational change was positively related to the job stress, negatively to the flourishing. The job stress was negatively related to the flourishing. The resistance of organizational change was meditating the acceptance to change and the job stress, and the acceptance to change and the flourishing. The job stress on the acceptance to change and the flourishing partially mediated as well as the resistance to change and the flourishing. The resistance to change and the job stress double meditated the acceptance to change and the flourishing. The implications, limitations of this study for future research were discussed.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.267-268
• /
• 2020

본 논문에서는 오픈소스를 이용하여 작은 전자장치부터 첨단 정밀 항공우주 비행장치에 까지 사용하는 릴레이의 기능시험을 누구나 손쉽게 수행할 수 있는 시험장치를 제안한다. 제안 시험장치는 전원부, 측정부, 시현부 및 연결부로 구성되며, 전원부는 릴레이 각각의 코일에 전압을 제공하고, 측정부는 릴레이 코일의 저항측정, 입력전압측정 및 릴레이 접점의 접점저항을 측정을 하기위한 부분이며 시현부는 릴레이의 정상유무를 시각적으로 나타내는 부분이며 마지막으로 연결부는 릴레이와 시험장치간의 연결을 담당한다. 제안한 시험장치는 항공 정비 실습용 뿐 아니라, 릴레이를 사용하는 모든 업체의 수입검사 부서 및 조립부서에서도 오픈소스를 이용하기 때문에 저렴하게 꾸미고 용이하게 사용할 수 있다는 장점 및 확정가능성을 가진다.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.1
• /
• pp.61-72
• /
• 2011

In this study, the structural details of steel girder-abutment joints with shear connectors and tie bars were suggested to improve the rigid behavior and crack-resisting capacity of the joints in integral bridges. Experimental loading tests of steel girder-abutment joint specimens with the proposed and empirically constructed structural details were carried out, and the capacities and behavioral characteristics of the joints were evaluated through loading tests. Based on the results of the loading tests, it was estimated that all types of tested joints can be applied to the steel girder-abutment joints because they have sufficient stiffness and crack-resisting capacity under the required design and yield loads. According to the initial stiffness, crack propagations, and load-strain relationships, however, the joints with shear connectors and tie bars showed better structural behaviors compared to the empirically constructed joint.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.157-162
• /
• 2012

A planing craft is designed specifically to achieve comparatively high speed on the surface of the water. The frictional resistance of planing craft can be reduced further by injecting air to the craft's bottom. In this paper, the resistance characteristics of high speed planing crafts with & without air injection at the bottom were compared by sea model-test method. As a result, we conformed that planing craft with air injection has much greater the effect of resistance reduction.