• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.129-134
• /
• 1999

This study is related to the investigation of the direct incorporation of $CO_2$ to polymer using quaternary ammonium salt catalysts. Quaternary ammonium salts showed good catalytic activity of $CO_2$ fixation in the synthesis of poly[(1,3-dioxolane-2-oxo-4-yl)methyl methacrylate] [poly(DOMA)] by the direct incorporation of $CO_2$ to poly(glycidyl methacrylate)[poly(GMA)]. Among the salts tested, the ones with higher alkyl chain length and with more nucleophilic counter anion showed higher catalytic activity. The yield of carbon dioxide addition increased with the reaction temperature. Kinetic study was carried out by measuring the variation of $CO_2$, pressure in a high pressure batch reactor. The reaction rate was first order to the concentration of poly(GMA) and $CO_2$, respectively. The rate constant was $0.69L/mol{\cdot}h$ and Henry's constant of $CO_2$ in DMSO at $80^{\circ}C$ was $6.8{\times}10^{-4}mol/L{\cdot}KPa$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.6
• /
• pp.69-77
• /
• 2002

To acquire the dynamic response and design the controller of the airship, the longitudinal motion of the airship with respect to the vertical gust, which is the nonlinear system, was studied. The effects of the apparent mass and moment of the airship delay the dynamic response and the settling time, which are slower than those of conventional airplanes. The current object of the airship is designed to cruise at 500~1000m altitude. At that height, the atmospheric conditions are generally unstable by wind gust. In this paper, it has been studied for the case of vertical gust, since the apparent mass effects are dominant in has been studied for the case of vertical gust, since the apparent mass effects are dominant in that plane. In addition to the study of the dynamic responses of the airship, the controller was designed using the PID-controller. When the gust was applied, airship responses were recovered of equilibrium states. However, it takes too ling time for recovery and the speed of airship is reduced. So, the aim in this paper was to fasten the recovery speed and to get back the cruising velocity. The control parameters were determined from the stability mode analysis, and the control inputs were the thrust and the elevator deflection angle.

• Applied Chemistry for Engineering
• /
• v.7 no.6
• /
• pp.1156-1163
• /
• 1996

This study is related to the investigation of the characteristics of quaternary ammonium salt catalyst on the addition reaction of carbon dioxide and glycidyl methacrylate(GMA) to form(2-oxo-1,3-dioxolane-4-yl)methacrylate(DOMA). Among the salts tested, the ones with higher alkyl chain length and with more nucleophilic counter anion showed a higher catalytic activity. Mixed catalysts of NaI and 18-crown-6 showed a good yield of DOMA, but when they are used alone, they showed no catalytic activity. The DOMA monomer was obtained in low polar solvents, while poly(DOMA) could be directly synthesized in aprotic dipolar solvents. Kinetic studies carried out by measuring $CO_2$ pressure in a high pressure batch reactor showed that the reaction rate was first order to the concentration of GMA and $CO_2$ respectively. The rate constant(k) was 0.56L/mol hr and Henry's constant(H') of $CO_2$ in diglyme at $80^{\circ}C$ was $6.5{\times}10^{-4}mol/L{\cdot}kPa$.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.491-497
• /
• 2015

This paper reports an experimental study for evaluating the effect of temperature on the mode I, mode II and mixed-mode interlaminar fracture toughness of adhesive joints with a curved cross-section of filament-wound dome-separated composite pressure vessel. Mode I and mixed-mode interlaminar fracture toughness were evaluated using DCB specimens, while mode II interlaminar fracture toughness was determined using ENF specimens. $[{\pm}10^{\circ}]_6$, $[{\pm}27^{\circ}]_6$ and ($[{\pm}10^{\circ}]_3/FM73/[{\pm}27^{\circ}]_3$) winding specimens with the curved cross-section were considered. In-situ temperature environments were simulated with a range of $-30^{\circ}C-60^{\circ}C$ using an environmental chamber and furnace. Experimental results on the effect of temperature indicate that interlaminar fracture toughness tends to be high at low temperature and is degraded with increase in temperature. For specimen types, it was found that interlaminar fracture toughness of $[{\pm}10^{\circ}]_3/FM73/[{\pm}27^{\circ}]_3$ winding specimens considered as adhesive joints of dome and helical part was higher than other specimens.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.451-454
• /
• 2000

Invasive methode and Non-invasive methode are used in blood pressure measurement. The Invasive methode can Set the correct measured blood pressure but, it has patient feels uncomfortable. So most of cases use Non-invasive methode. The Oscillometric method is commonly apply to modem electric sphygmomanometer and using various algorithm. In this paper describe about a algorithm it control and to determinate the cuff pressure, and filtering that data for measure the blood pressure. The communicating with personal computer can pressure deflation is by Solenoid valve and it uses RS-232 system in packet communication. The main using algorithm for blood pressure measurements are maximum amplitude algorithm and oscillometric algorithm. MAA(maximum amplitude algorithm) has various measured oscillation it depend on patient's age, height, weight and arm circumference size. In this paper, 1 studied the various measured oscillation apply to characteristic ratio and can get the result of systolic blood pressure, diastolic blood pressure, mean blood pressure. It was not used same ratio to measuring oscillation. In the MAA(maximum amplitude algorithm), we hope for reduce the difference with the real blood pressure and the measured blood pressure, when it applied with various specific ratio.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2004.11a
• /
• pp.86-100
• /
• 2004

계산을 통한 단백질 상호작용 예측 기법의 중요성이 제기되면서 많은 단백질 상호 작용 예측 기법이 제안되고 있다. 하지만 이러한 기법들이 일반 사용자가 손쉽게 사용할 수 있는 서비스 형태로 제공되고 있는 경우는 드물다. 본 논문에서는 현재까지 알려진 단백질 상호작용 예측 기법 중 예측 기법의 완성도가 높고 상대적으로 예측 정확도가 높은 것으로 알려진 도메인 조합 기반 단백질 상호 작용 예측 기법을 PreSPI(Prediction System for Protein Interaction)라는 서비스 시스템으로 설계하고 구현하였다. 구현된 시스템이 제공하는 기능은 크게 도메인 조합 기반 단백질 상호 작용 예측 기법을 서비스 형태로 만들어 제공하는 기능으로 입력 단백질 쌍에 대한 상호작용 예측이 중심이 된 핵심기능과, 핵심 기능으로부터 파생되는 기능인 부가 기능, 그리고 주어진 단백질에 대한 도메인 정보검색 기능과 같이 단백질 상호작용에 관하여 연구하는 연구자에게 도움이 되는 일반적인 기능으로 구성되어 있다. 계산을 통해 단백질 상호 작용을 예측하는 시스템은 대규모계산이 요구되는 경우가 많아 좋은 성능을 갖추는 것이 중요하다. 본 논문에서 구현된 PreSPI 시스템은 서비스에 따라 적절히 그 처리를 병렬화 함으로써 시스템의 성능 향상을 도모하였고, PreSPI 가 제공하는 기능을 웹 서비스 API 로 Deploy 하여 시스템의 개방성을 지원하고 있다. 또한 인터넷 환경에서 변화되는 단백질 상호 작용 및 도메인에 관한 정보를 유연하게 반영할 수 있도록 시스템을 계층 구조로 설계하였다. 본 논문에서는 PreSPI 가 제공하는 몇 가지 대표적인 서비스에 관하여 사용자 인터페이스를 중심으로 상술함으로써 초기 PreSPI 사용자가 PreSPI 가 제공하는 서비스를 이해하고 사용하는 데에도 도움이 되도록 하였다.있어서 자각증상, 타각소견(他覺所見)과 함께 이상(異常)은 확인되지 않았으며 부작용도 없었다. 이상의 결과로부터, ‘펩타이드 음료’는 경증고혈압 혹은 경계역고혈압자(境界域高血壓者)의 혈압을, 자각증상 및 혈액${\cdot}$뇨검사에도 전혀 영향을 미치지 않고 저하시킨다고 결론지었다.이병엽을 염색하여 흰가루 병균의 균사생장과 포자형성 등을 관찰한 결과 균사가 용균되는 것을 볼 수 있었으며, 균사의 용균정도와 분생포자형성 억제 정도는 병 방제효과와 일치하는 경향을 보였다.을 의미한다. IV형은 가장 후기에 포획된 유체포유물이며, 광산 주변에 분포하는 석회암체 등의 변성퇴적암류로부터 $CO_{2}$ 성분과 다양한 성분의 유체가 공급되어 생성된 것으로 여겨진다. 정동이 발달하고 있지 않으며, 백운모를 함유하고 있는 대유페그마타이트는 변성작용에 의한 부분용융에 의해 형성된 멜트에서 결정화되었으며, 상당히 높은 압력의 환경에서 대유페그마타이트의 결정화작용 과정에서 용리한 유체의 성분이 전기석에 포획되어 있다. 이때 용리된 유체는 다양한 성분을 지니고 있었으며, 매우 낮은 공융온도와 다양한 딸결정은 포유물 내에 NaCl, KCl 이외에 적어도 $CaCl_{2},\;MgCl_{2}$와 같은 성분을 포함하고 있음을 지시한다. 유체의 용리는 적어도 $2.7{\sim}5.3$ kbar 이상의 압력과 $230{\sim}328^{\circ}C$ 이상의 온도에서 시작되었다.없었다. 결론적으로 일부 한방제와 생약제제는 육계에서 항생제를 대체하여 사용이 가능하며 특히 혈액의 성분에 유의한 영향을 미치는 것으로 사료된다. 실증연구가 필요할 것으로 사료된다.trip과 Sof-Lex disc로 얻어진 표면은 레진전색제의 사용으로 표면조도의 개선

• Food Science and Preservation
• /
• v.22 no.5
• /
• pp.714-720
• /
• 2015

Biji is a tofu by-product made by squeezing the liquid out of the dregs left over from making tofu. The objectives of this research were to break the biji into sub-micron-scale particles and to prepare a biji sub-micron suspension having increased quality characteristics such as antioxidant capacity, polyphenol, dietary fiber, and soluble protein contents, in comparison with untreated biji. Disruption of biji by an ultra-high-pressure homogenization (UHPH) process was used to prepare the sub-micron suspension of biji. UHPH can be used to prepare emulsions or suspensions with extremely small particle sizes. The effect of the UHPH process on biji was studied at 1,000, 1,500, and 2,000 bar. The extraction yield increased up to 1.64 times by breaking the biji to form a sub-micron suspension. The soluble dietary fiber, protein, and free amino acid contents were increased by the UHPH process (p<0.05), in comparison with those of untreated biji. Furthermore, the total sugar, free sugar, and total polyphenol contents of biji were augmented by the UHPH process. Antioxidant activity (ABTS) after exposure to UHPH (1,000-2,000 bar) was well retained (p<0.05). The extraction efficiencies and nutritive components were enhanced by increasing the pressure in the UHPH process.

• Korean small business review
• /
• v.42 no.4
• /
• pp.173-212
• /
• 2020

Interest in sustainable management based on the stakeholder perspective is expanding not only within an organization but also across the supply chain. For large companies that have established networks, sustainability management of the supply chain is now a factor that not only determines the social performance of the company as a whole, but also determines its long-term competitive position. Despite these changes in the business world, especially the proliferation of the sustainable supply chain management (SSCM) system, systematic research on SSCM has been lacking. In particular, there was a lack of empirical analysis on which factors promoted the establishment of the SSCM system for large companies and what's the effects of SSCM. In this regard, this study analyzes i) the impact of the social responsibility pressure of customers as external stakeholders and the CSR orientation of purchasing managers as internal stakeholders on supply chain transparency and partnership cooperation respectively, and ii) whether supply chain transparency and partnership cooperation can enhance corporate reputation. The samples used in this study were 69 large companies representing Korea. The results showed that the social responsibility pressure of customers and the purchasing manager's CSR orientation were positively related to the transparency of the supply chain. However, for partnership cooperation, only the purchasing manager's CSR orientation was found to have a positive and significant effect. Meanwhile, both supply chain transparency and partnership cooperation were positively related to the corporate reputation. At the end of the study, discussions on the implications of the results and future research directions will be presented.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.857-864
• /
• 2013

A laser machining process has been applied in many manufacturing fields and it provides an excellent energy control for treating materials. However, a heat effect during laser machining can deteriorate material properties. Specifically, a thermally induced stress can be a problem in laser-machined structures on a metal surface. In this study, temperature and stress on cold-rolled carbon steel sheet machined with laser hole drilling were explored in an experimental approach and a numerical method. Stresses by temperature gradients inside the materials were generated in fast cooling. The stresses were measured by using a hole-drilling method and the material properties of carbon steel (SCP1-S) were obtained in the experiment. It was found that the stress predicted from the numerical analysis was in agreement with the stresses measured by using the hole-drilling method. The analysis can be applied for evaluating structure characteristics machined with a laser.

• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.621-626
• /
• 2010

In this study, imidazole-based ionic liquid on polystyrene was prepared and its catalytic performance in the cycloaddition of $CO_2$ with allyl glycidyl ether(AGE) to produce allyl glycidyl carbonate was investigated. The ionic liquid was generated on the polystyrene-based polymer through the immobilization of imidazole. The prepared catalyst was characterized using a number of instrumental analysis including EA, FT-IR, TGA and SEM. The immobilized ionic liquid showed very good catalytic activity for the cycloaddition of $CO_2$ with AGE, having 80% of AGE conversion with over 96% of the carbonate selectivity at $120^{\circ}C$ under 1.48 MPa $CO_2$ pressure. The immobilized ionic liquid can be used for the reaction up to four consecutive runs without significant loss of its catalytic activity.