• 한국기계가공학회지
• /
• 제20권3호
• /
• pp.40-46
• /
• 2021

An automatic transmission of automobiles enables comfortable driving experience with lower transmission shifting jerks. However, the assembly structure is more complicated and requires additional components with lower efficiency than the manual transmission system. Extensive research has been conducted to improve the overall transmission efficiency by optimizing each component of the automatic transmission assembly. This study focuses on enhancing the friction torque of double angular contact ball bearings used in automatic transmission. The friction torque of the bearing varies with the operating conditions such as the operational load and rotating speed. Since reducing the friction torque of the bearing tends to deteriorate the durability of the bearing, it is necessary to design the bearing having a minimum required friction torque by determining the durability life of an automatic transmission assembly, In this study, the theoretical life and friction torque of conventional and newly-developed bearings are calculated. The difference in the friction torque between the new and existing bearings are also evaluated.

• 한국의학물리학회지:의학물리
• /
• 제18권3호
• /
• pp.118-125
• /
• 2007

본 연구에서는 온보드 영상장치(On-Board Imager; OBI, Varian Medical Systems, USA)의 kV X선 영상 및 전자조사문 영상(Electric portal image), 디지털화재구성 영상(Digitally reconstructed radiographic image) 내 관심지점에서의 기하학적 일치성 여부를 평가하고자 하였다. 이를 위해 상용화된 IMRT 팬텀(Wellhofer, Germany)에 포함된 부품의 윗면 및 왼쪽면에 각 3개씩 총 6개의 볼베어링을 부착하여 위치 확인용 팬텀을 제작하였다. 각 영상의 획득을 위해 팬텀을 전자조사문 영상을 이용하여 각 방향에서 정확하게 중심이 일치하도록 셋업한 후 직교하는 kV X선 영상 및 전자조사문 영상을 획득하여 각 볼베어링의 절대 위치를 비교하였다. 또한 2차원-2차원 정합 후 보정 결과의 정확성 평가를 위하여 팬텀의 중심을 정확히 회전중심점에 일치시킨 후 갠트리 각도 $315^{\circ}$에서 획득된 전자조사문 영상을 기준 영상으로 한 뒤 카우치를 각 방향으로 $-5{\sim}5\;mm$ 임의로 이동한 후 OBI에서 지원하는 2차원-2차원 정합 기능을 이용하여 셋업 오차를 보정하도록 하였다. 이후 다시 갠트리 각도 $315^{\circ}$에서 전자조사문 영상을 획득한 후 기준 전자조사문 영상과 비교하였으며 이 과정을 10회 반복하였다. 연구 결과 kV X선 영상과 전자조사문 영상, 디지털화재구성 영상 간 볼베어링 중심의 위치는 1 mm 이내에서 일치하였으며 실제 위치와도 1 mm 이내에서 일치하였다. 또한 기준 전자조사문 영상과 2차원-2차원 정합 후 획득된 전자조사문 영상 내 각 볼베어링의 위치들도 1 mm 이내에서 일치하였다. 본 연구를 통해 OBI의 kV X선 영상이 기하학적으로도 전자조사문 영상과 동일함을 확인할 수 있었다

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1990년도 제12회 학술강연회초록집
• /
• pp.41-45
• /
• 1990

기계시스템의 파괴 마멸 진단을 위한 Condition Nonitoring 기술은 기계류의 작동 상태를 계속적$\cdot$정기적으로 검지하여 failure 발생을 사전에 예방$\cdot$조치하는데 중요성이 있으며, 계속적으로 기계시스템의 상태를 파악함으로써 차후 시스템 개선 및 윤활시스템의 최적화를 위한 data base를 구축함에 기술적용의 의의를 가지고 있다. 본 연구에서는 Condition Monitoring 기술중 Contaminant Inspection Method를 이용하여 볼베어링의 정상 마모상태에서 변화되어 가는 마모상태를 규명하며, 통계적 처리에 의해 시간의 추이에 따라 통계 변수들의 경향을 분석하며 마모 상태의 경향을 정량적으로 분석하였다.

• Tribology and Lubricants
• /
• 제20권4호
• /
• pp.177-182
• /
• 2004

In a turbopump cryogenic ball bearings are used to carry static and hydraulic loads, and these ball bearings must stand up to high load and speed in cryogenic circumstance. Verification of bearing performance is crucial to successful development of a turbopump. In this paper, focusing on the turbopump under developing by KARI, the performances of 203 and 207 bearings are verified through the series of tests simulating the real operating condition of turbopump.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 춘계학술대회 논문집
• /
• pp.262-263
• /
• 2010

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.820-825
• /
• 2007

A ballscrew-linear motion(LM) guide is well-described by its name: it is a LM guide that runs by ballscrew. It consists of LM rail, LM block, end plate, screw, nut and bearing balls. The ballscrew-LM guide has many advantages compared with conventional LM guide. The high efficiency achieved with rolling contact devices permits the employment of antibacklash methods. The balls provide the only physical contact between nut rail and block and ball screw and nut replacing the sliding friction with a rolling motion. The life of the ballscrew-LM is determinated by the balls. The objective of this paper is to introduce the design of the ballscrew-LM with the safety working load.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.841-845
• /
• 1995

In this study, a motor-integrated high-speed spindle system with .psi. 65mm*25,000rpm is developed by introducing the oil-jet lubrication method,ceramic angular contact ball bearing, a built-in motor and so on. And oil-jet lubrication experiments for evaluating the system performance are performed under various operation conditions. Especially, in order to establish the oil-jet lubrication conditions related to the development of a high-speed spindle system, the effects of oil supply rate and rotational spindle speed are investigated on the temperature rise, temperature distribution,motor current and so on.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.59-64
• /
• 1998

In this study, a motor-integrated high-speed spindle system with $\psi$65mm $\times$ 25,000rpm is developed by introducing the oil-jet lubrication method, ceramic angular contact ball bearings, a built-in motor and so on. And oil-jet lubrication experiments fur evaluating the system performance are performed under various operation conditions. Especially, in order to establish the oillet lubrication conditions related to the development of a high-speed spindle system, the effects of oil supply rate and rotational spindle speed are investigated on the temperature rise, temperature distribution, motor current and so on.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.979-984
• /
• 2004

The ball bearing having faults generally shows, nonlinear vibration characteristics. For the effective method of fault diagnosis on bail bearing, non-linear diagnostic methods can be used. In this paper, the correlation dimension analysis based on nonlinear timeseries was applied to diagnose the faults of ball bearing. The correlation dimension analysis shows some Intrinsic information of underlying dynamical systems, and clear the classification of the fault of ball bearing.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.237-242
• /
• 2001

In this paper, we theoretically analyzed the NRRO(the non-repeatable run-out) of a ball bearing with ball geometric imperfection. The quasi-static and dynamic analysis of a ball bearing was performed to calculate the displacement of shaft center caused by the ball form errors while the shaft is rotating. From consideration of the generating mechanism of NRRO, it is found that the size and form errors of ball generate vibrations with (equation omitted)$\_$c/ and n(equation omitted)$\_$b/${\pm}$(equation omitted)$\_$c/(where n is even) components, respectively. The ball form errors of a ball bearing were precisely measured and NRRO of a ball bearing was calculated using the measured data. A statistical approach was peformed to analyze NRRO of ball bearings with radial errors.