• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.393-396
• /
• 2016

Digital image processing is the technical area of processing and analysis with intellectual and efficient ways, which has been commercialized in a variety of applications. However, the noise is occurred in the image data with multiple reasons and various studies have been performed to eliminate the noise. Generally, the types of noise vary by causes and forms, and composite noise is the representative one. Hence, the modified switching filter to process by types of noise was suggested to eliminate composite noise in the image effectively and to have excellent characteristics of edge conservation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.7
• /
• pp.27-38
• /
• 2016

This work proposes a 12b 30MS/s 0.18um CMOS SAR ADC based on low-power composite switching with an active die area of $0.16mm^2$. The proposed composite switching employs the conventional $V_{CM}$-based switching and monotonic switching sequences while minimizing the switching power consumption of a DAC and the dynamic offset to constrain a linearity of the SAR ADC. Two equally-divided capacitors topology and the reference scaling are employed to implement the $V_{CM}$-based switching effectively and match an input signal range with a reference voltage range in the proposed C-R hybrid DAC. The techniques also simplify the overall circuits and reduce the total number of unit capacitors up to 64 in the fully differential version of the prototype 12b ADC. Meanwhile, the SAR logic block of the proposed SAR ADC employs a simple latch-type register rather than a D flip-flop-based register not only to improve the speed and stability of the SAR operation but also to reduce the area and power consumption by driving reference switches in the DAC directly without any decoder. The measured DNL and INL of the prototype ADC in a 0.18um CMOS are within 0.85LSB and 2.53LSB, respectively. The ADC shows a maximum SNDR of a 59.33dB and a maximum SFDR of 69.83dB at 30MS/s. The ADC consumes 2.25mW at a 1.8V supply voltage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.397-400
• /
• 2016

In digital images, the addition due to noise occurs in the process of obtaining, saving, and transmitting. For examples of noise, there are salt and pepper noise, Gaussian noise, and composition noise where various noises are mixed. Existing filters have insufficient noise removal characteristics because it uses single filters in composite noise environment. Therefore the study suggested a switching filter that processes with special weighted value and median filter according to local mask salt and pepper noise density when central pixel is damaged by salt and pepper noise, and processes by applying weighted values differently according to standard deviation of local mask when damaged by Gaussian noise.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.5
• /
• pp.396-402
• /
• 2008

This paper presents the structure and performance of a new Integrated magnetics-based transformer, which can be readily adapted to zero-voltage switching full bridge dc-to-dc converters. The proposed transformer features with two paralleled primary windings and a center-tapped secondary winding. The transformer can be fabricated on standard EE or EI cores where the primary and secondary windings are placed on the outer legs while the output filter inductor is wound on the middle leg. The performance of the proposed transformer is demonstrated with a 100 kHz 720 W experimental dc-to-dc converter which recorded a 92% conversion efficiency at 12 V output voltage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.645-651
• /
• 2021

With the advent of the Fourth Industrial Revolution, modern society uses a diverse pool of devices. In this context, there is increasing interest in removing various kinds of noise arising in data transmission. However, it is difficult to restore image that damaged by mixed noise, and a digital filter that effectively restores an image according to the characteristics of the noise is required. In this paper, we propose a digital switching filter algorithm to remove mixed noise generated during digital image transmission. The proposed algorithm switches the filtering process through noise judgment and reconstructs the image using fuzzy weights and combined weights based on the pixel values inside the mask. To evaluate the proposed algorithm, we compared it with existing filter algorithms through simulation. Filtering results were expanded and compared for visual evaluation, and PSNR comparison was used for quantitative evaluation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.300-303
• /
• 2015

Digital imaging process has been put to practical use in various application sectors due to a rapid advancement such as memory devices, etc. However, noises are being generated due to various reasons during the image processing and a variety of methods are being studied in order to eliminate these noises. Generally, images are damaged due to a mixed noise having different characteristics. In this paper, a filter algorithm which switches according to the noise types was proposed in order to mitigate the influence of mixed noise included in the image. And using the PSNR as the standard for objective decision making of the improvement effect, it was compared with the existing methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.6
• /
• pp.1215-1220
• /
• 2016

As society has developed rapidly toward a highly advanced digital information age, a multimedia communication service for acquisition, transmission and storage of image data as well as voice has being commercialized. However, image data is always corrupted by various noises during image processing, so researches for removing noises have been continued until now. There are diverse types of noise on the image including salt and pepper noise, AWGN, and mixed noise. Hence, the filter algorithm for the image recovery was proposed that salt and pepper noise was processed by linear interpolation, histogram weighted values and median filter after defining the noise to lessen the impact of mixed noise added in the image, and AWGN was processed by the pixel information of local mask establishing the weighted values in this study. In addition, the algorithm was compared with the conventional methods for objectively and used the PSNR(peak signal to noise ratio) as the basis of the determination.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.30 no.4
• /
• pp.307-313
• /
• 2019

The traveling wave tube amplifier (TWTA), which can be applied to the Ka-band millimeter-wave multi-mode seeker, consists of an high voltage power supply(HVPS), a grid modulator, a command and control, and an RF assembly. We designed a power supply that generates a -17.9 kV high voltage by synchronizing the pulse repetition frequency(PRF) and power supply switching frequency(i.e. synchronization frequency), and a high-speed grid-switching modulator for RF pulse modulation. The TWTA, which is fabricated through miniaturization with a volume of 3.18 L, has high pulse switching characteristics of up to 18.5 ns. The maximum rise/fall time of the grid on/bias signal and peak power is more than 564.9 W. Moreover, an excellent spurious performance of -68.4 dBc or less was confirmed within the range of PRF and PRF/2.

• Review of KIISC
• /
• v.8 no.2
• /
• pp.91-106
• /
• 1998

본 고에서는 광범위한 분산 망 환경에서 그 중요성이 점차 중요하게 부각되는 네트워크 보안에 대한 최신 기술 동향을 소개한다. 네트워크 보안은 개별적인 정보보호 서비스에 필요한 다양한 기술들이 복합적으로 구성되어 개발된다. 통신 프로토콜의 기본인 OSI 참조 모델에서의 보호 프로토콜, 현재 가장 많이 사용되어지고 있고 개발이 활발히 이루어지고 있는 응용인 전자 우편 보안 프로토콜, 그리고 인터넷 망의 데이터 흐름을 보호하고자 하는 VPN과 가장 관심이 많은 스위칭 기술인 ATM 에서의 보안 고려사항 등을 고찰해 본다.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.7
• /
• pp.664-669
• /
• 1991

In order to improve the reliability and the stability of static power conversion system, further to optimize the operational characteristics of the system, it is very important to investigate the effects (output and switching component characteristics) of each parameters in the system. Therefore this paper particualrly deals with the characteristics of a novel ZVS multi-resonant conversion system to duty cycle, resonant capacitance, resonant inductance, and output capacitance. The results show that resonant inductance and output capacitance are dominat factors in the system.