• Journal of Satellite, Information and Communications
• /
• v.5 no.2
• /
• pp.8-13
• /
• 2010

Satellite structure should be designed to accommodate and support safely the payload and equipments necessary for its own missions and to secure satellite and payloads from severe launch environments. The launch environments imposed on satellites are quasi-static accelerations, aerodynamic loads, acoustic loads and shock loads. Especially when optical payload is accommodated, satellite structure usually adopts the optical bench consisting of composite material not only to support and secure but also to guarantee good pointing stability against extreme thermal environments. This paper deals with optical bench and support structure which shall be designed to minimize the loads transferred to optical payloads from satellite.

• Korean journal of communication and information
• /
• v.18
• /
• pp.7-36
• /
• 2002

This study is concerned with analysing complexity, flexibility and dynamism of social discoursive space. The developmental process of social discourse is analogous to that of a spatial structure of social discourse. Post-capitalist society has seen New-Liberalism and New-Conservatism have become dominant, resulting in the deterioration of the cultural politics of citizenship. It is argued that the position of otherness, in which those binary structures (inside/outside or centre/margin) collide and collapse, is where subversive discourse can emerge to dominant discursive power. Furthermore, it is necessary to democratize social discursive space, through which the Other becomes able to. participate in the social production, distribution and consumption of social discourse.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.205-213
• /
• 2019

In a construction site, excavation work has a close relation with temporary earth retaining structure. In order to build the underground structure most effectively in a narrow space, prevent soil relaxation of the external behind ground in excavation work, and maintain a ground water level, it is required to install a temporary earth retaining structure that secures safety. To prevent soil washoff in underground excavation work, the conventional method of temporary earth retaining structure is to make a temporary wall and build the internal support with the use of earth anchor, raker, and struct for excavation work. RSB method that improves the problem of the conventional method is to remove the internal support, make use of two-row soldier piles and bracing, and thereby to resist earth pressure independently for underground excavation. This study revealed that through the field application cases of RSB method and the measurement result, the applicability of the method for installing a temporary earth retaining structure, the assessment result, and displacement all met allowable values of measurement, and that the RSB method, compared to the conventional method, improved constructability and economy.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1338-1347
• /
• 2018

In this study, Ti-mesh based electrodes were fabricated for the application of anode to the electrolysis process for wastewater treatment using Pd electroless plating method. The removal performance of the prepared Pd / Ti-mesh electrode was evaluated as representative dye RO16, and the durability and performance were maximized by varying the electrode manufacturing conditions. As a result, it was confirmed that the coating condition had no significant effect on the performance, and that the heat treatment process greatly affected the performance and the durability was improved. In addition, we tried to maximize performance and durability by complexing Ir, Ru, and Ta. However, as the thickness of the layer increased due to the limitation of the coating method, the resistance increased and the performance decreased accordingly.

• Composites Research
• /
• v.21 no.3
• /
• pp.24-30
• /
• 2008

Durability problems may arise in the concrete, which is one of the major construction materials, used in the construction field. Bridge piers and foundation piles are usually made with concrete and they are exposed to the moisture and hence the durability of the concrete reduced significantly due to oxidization of re-bar and icing of concrete. To mitigate such problems, FRP tube has been developed and the concrete filled FRP tube (CFFT) has been investigated to find the confinement effect which is provided additionally. It was reported that if the concrete is wrapped with FRP, strength and chemical resistance are improved significantly. In order to apply such a member in the construction field, structural behavior and applicable design guideline or design criteria must be thoroughly investigated. In the experimental investigation, the results are compared with the previous research results and the relationship which can predict the ultimate strength and strain is suggested. In addition, some comments found at the compression tests are given briefly.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.224-233
• /
• 2016

Embedded Railway Systems (ERS) will be adapted for wireless trams and will be constructed along city roadways. An asphalt layer should be overlaid on top of the concrete slab used as the trackbed structure in order to ensure smoothness and surface levels equal to those of existing road pavement in downtown city areas. However, the characteristics of an asphalt layer when used as overlay pavement for an ERS are complicated and the behavior of this material is not yet well defined and understood. Therefore, in this study, laboratory shear and tensile bond strength tests were conducted to investigate the bonding behavior of an asphalt layer in a multilayered trackbed section of an ERS. For the laboratory tests, a waterproof coating material was selected as a bonding material between the asphalt overlay and a concrete specimen. Valuable design parameters could be obtained based on the tensile and shear bond strength test results, providing information about the serviceability and durability of the overlaid pavements to be constructed alongside the ERS for wireless trams. In addition, a deformation analysis to assess the tensile strain generated due to truck axle loads at the interface between the asphalt layer and the concrete slab was conducted to verify the stability and performance of the asphalt layer.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.504-511
• /
• 2010

This study was undertaken to investigate the effects of feeding complex probiotics (Lactobacillus casei, Bacillus subtilis, Saccharomyces cerevisiae, Aspergillus oryzae, Streptomyces griseus, $1.5{\times}10^{10}$ CFU/kg) and antibiotics (oxytetracycline (OTC), 110 ppm) on growth performance and meat quality characteristics of broiler chicks. In the experiment 1, 0.3% complex probiotics feeding level was chosen to be proper addition level due to better average daily gain (ADG), feed conversion (FC) and dressing percent (DP) results among 3 levels (0.1, 0.3 or 0.5%). In the experiment 2, 5 treatments (T1, no probiotics + no antibiotics; T2, probiotics 0.3% + no antibiotics; T3, probiotics 0.3% + antibiotics 50%; T4, probiotics 0.3% + antibiotics 100%; T5, no probiotics + antibiotics 100%) were investigated. In the growth performance of broilers, T5 (antibiotics 100% only) showed the highest (p<0.05) ADG and FC values while T1 (control) showed the worst growth performance. However, T3 (probiotics 0.3% + antibiotics 50%) showed higher ADG (p<0.05), FC (p<0.05) and DP (p>0.05) values compared to control. In the breast and leg meat quality, T3 showed similar pH, proximate composition, cooking loss and meat color values except shear force value compared to T5. Addition of 0.3% probiotics with 50% antibiotics (T3) tended to lower the blood cholesterol levels of broiler chicks and Escherichia coli or Salmonella counts in cecum microflora of broiler chicks compared to T5. In the residual antibiotics analysis, T3 contained 0.04 ppm of residual antibiotics in the breast meat while T4 or T5 contained 0.1 ppm of residual antibiotics and addition of 0.3% probiotics with 50% antibiotics in broiler diets could lower the residual antibiotics level to 40% in the meat. As a result, 0.3% probiotics addition with 50% antibiotics in the broiler diets could be recommended for the production of high quality broiler meat.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.3
• /
• pp.160-168
• /
• 2003

This study was carried out to investigate the effects of induced wet-injury conditions on barley seedling growth. Barley seedlings at the three leaf stage were grown in culture solutions with various combinations of dissolved oxygen (DO), nutrients and citric acid (CA) concentrations. Seedling growth was reduced by hypoxia. Root length and root fresh weight were most severely reduced under 1 ppm DO. Shoot growth was slightly reduced but not root growth under low nutrient condition. Seedling growth was reduced by CA in a concentration-dependant manner, Response of seedling growth was efficiently differentiated in a solution containing 1 ppm DO, one tenth of the normal P, K and Mg concentration and 3 mM CA. Under this induced wet-injury condition, overall seedling growth of 6 cultivars was reduced by 11 to 19% compared to the control condition. The results suggest that the induced wet-injury condition can be used for the screening of resistant genotypes at the seedling stage.

• Research in Plant Disease
• /
• v.23 no.2
• /
• pp.99-113
• /
• 2017

Recently, global warming and drastic climate change are the greatest threat to the world. The climate change can affect plant productivity by reducing plant adaptation to diverse environments including frequent high temperature; worsen drought condition and increased pathogen transmission and infection. Plants have to survive in this condition with a variety of biotic (pathogen/pest attack) and abiotic stress (salt, high/low temperature, drought). Plants can interact with beneficial microbes including plant growth-promoting rhizobacteria, which help plant mitigate biotic and abiotic stress. This overview presents that rhizobacteria plays an important role in induced systemic resistance (ISR) to biotic stress or induced systemic tolerance (IST) to abiotic stress condition; bacterial determinants related to ISR and/or IST. In addition, we describe effects of rhizobacteria on defense/tolerance related signal pathway in plants. We also review recent information including plant resistance or tolerance against multiple stresses ($biotic{\times}abiotic$). We desire that this review contribute to expand understanding and knowledge on the microbial application in a constantly varying agroecosystem, and suggest beneficial microbes as one of alternative environment-friendly application to alleviate multiple stresses.

• Journal of Platform Technology
• /
• v.6 no.4
• /
• pp.59-68
• /
• 2018

The objective of this study is to develop an embedded antenna structure with NFC and WPC composite functions. By selecting stable materials, the optimal component ratio of the polymer sheet was determined. The low cost embedded winding method compared to the existing FPCB was devised. During the winding process, characterization and process technology were developed. We also fabricated a ferrite mold to process the WPC grooves and developed the process technology for optimizing the WPC antenna. The following conclusions were obtained. (1) Optimum composition ratio was derived as Fe 87.5%, Si 7%, Al 5.5% and selected as the final material. (2) Optimal sheet conditions were derived from the experimental evaluation method and the experimental design method through the combination test of the optimized sheet and the conventional mass production FPCB. (3) According to coil diameter and inner diameter, Q value fluctuation, resistance value and efficiency fluctuation are obtained. Therefore, the most suitable coil condition is selected and Rx matching is performed. (4) The EMV load modulation test and the cognitive distance test of the polymer sheet and the ferrite sheet showed that the recognition distance of the polymer sheet at 1k and 4K was 32-33 mm and the recognition distance of the ferrite sheet at the same condition was 30-31 mm.