• Journal of Energy Engineering
• /
• v.8 no.1
• /
• pp.67-75
• /
• 1999

여러 종류의 내화재로 구성된 석탄가스화기에서의 온도분포 및 열손실량을 구하기 위한 전산해석을 수행하였다. 석탄가스화기 내화재 설계를 위한 적절한 방법론을 제안하기 위하여 1차원 이론적 해석, 2차원 전도열전달 해석 및 3차원 대류-전도 복합열전달 해석 등 세가지 방법론으로 해석을 각각 수행하였다. 해석 결과들은 석탄가스화기 실험 결과와 정상적 정량적으로 잘 일치하는 것으로 나타났다. 결과의 정확성, 수치해석 상의 수렴성 및 계산시간 등을 종합적으로 고려해 볼 때, 전산해석에 핵심 경계조건인 가스화기 내벽의 온도를 적절히 설정할 수 있는 경우에는 2차원 전도열전달 해석이 공학적 설계에 적용하기 알맞은 방법론으로 판단되었다. 전산해석 결과에 의하면, 현재 실험이 진행중인 하루 3톤 처리 용량급의 석탄가스화기에서의 총 열손실량은 설계치 운전 기준으로 약 1% 정도인 것으로 판별되었다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.15-20
• /
• 1998

전산유체역학 기법을 이용하여 석탄가스화기 내화재내에서의 온도분포 해석 및 열손실량 계산을 수행하였다. 일차원 이론적 해석, 이차원 전도열전달 해석 및 삼차원 대류-전도 복합열전달 해석 등 세 가지 방법론으로 전산해석을 수행하고 그 결과들을 서로 비교하였으며, 또한 해석결과들을 석탄가스화기 실험결과와 비교하였다. 결과의 정확성, 수치해석상의 편리성(수렴성 및 계산시간) 등을 종합적으로 검토하여, 이차원 전도열전달 해석이 공학적 설계에 적용하기 적절한 방법론임을 제시하였다. 전산해석 결과를 3톤/일급 석탄가스화기에 적용해 본 결과, 총 열손실량은 설계치 운전기준으로 약 1% 정도인 것으로 판별되었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.4
• /
• pp.395-402
• /
• 2010

Baffle injectors are protruded into the combustion chamber and form an anti-pulsating baffle to prevent high-frequency combustion instabilities in transverse modes. Being exposed to a high heat-flux environment, the baffle injector has self-cooling passages through which kerosene is convected and heated. The baffle injector with 20 spiral cooling channels has been developed and successfully applied to 30 $ton_f$-class combustors without any performance loss due to an additional cooling. In this work, numerical analysis of conjugate heat transfer in baffle injectors with various cooling channel designs has been performed in order to reduce the fabrication cost which would be considerably increased for the 75 $ton_f$-class combustor. Prior to the application to a full-scale combustor, the thermal durability of the modified design has been verified through the subscale hot-firing tests.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.6
• /
• pp.10-20
• /
• 2022

The present study developed a design code for preburner of staged combustion cycle engines, which calculates preburnt gas at high-pressure oxidizer-rich conditions and predicts conjugate heat transfer and hydraulics of cryogenic fluid flow through cooling passages. It has been written based on the open-source library Cantera, into which this study has incorporated new source codes to predict correctly non-ideal thermodynamics and transport anomalies of the cryogenic fluid. For a preburner of 100 tonf-class booster engine currently under preliminary design, the present code demonstrated predictive capability and usability as a design code by comparing with CFD simulation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.5
• /
• pp.451-457
• /
• 2006

Conjugate heat transfer (CHT) is the simultaneous, coupled heat transfer within a fluid and an adjoining solid, and the interface treatment plays an important role in its analysis, particularly when using unstructured grid system. In the present paper a new solid-fluid interface treatment in CHT analysis is presented and applied to two typical CHT problems, i.e. natural convections in both concentric thick-walled cylinders and cavity with a centered solid body. The present interface treatment for unstructured mesh clearly demonstrates the same accuracy and robustness as that for typical structured mesh.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.21.1-21.1
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.946-948
• /
• 2002

최근 컴퓨팅 기술의 발전으로 3차원 복합열전달(conjugate heat transfer) 문제를 계산하는 수 치해석 기술이 어느 정도 가능해 졌지만, 실제적인 전력기기 내부의 온도분포를 수치적으로 계산하는 것은 탑재된 구성요소의 다양한 크기와 형상으로 인한 매우 복잡한 경계조건을 수반하고 조밀한 격자를 요구하기 때문에 공학적이지 않다. 이를 위하여 해석적 모델을 수립하여 전력기기 열설계를 위한 수치적 해석에 적용하는 방법이 널리 사용되고 있다. 본 연구에서는 열회로망법(Thermal Network Analysis, TNA)을 이용하여 전력기기 내부의 온도분포를 예측할 수 있는 프로그램을 개발하였다. 전류가 흘러 열이 발생하고 소산되는 주회로 성분들을 각각의 노드로 분할하는 절차를 확립하였고 열접촉저항과 주울열을 적절히 선정함으로써 실제 전류가 흐르는 회로망 내 온도분포를 계산하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.1
• /
• pp.33-42
• /
• 1999

The effects of wan thermal boundary condition were investigated for a uniform wall temperature, a uniform wall heat flux, and for coupled heat conduction In the channel wall with transverse rectangular ribs. Numerical investigations for steady laminar flow show behavior similar to that observed experimentally in the separated flow region for flow over a cylinder. Conjugate heat transfer with a low solid-fluid thermal conductivity ratio does not lead to the same results as for the uniform heat flux boundary condition, and heat transfer reversal is found on the back sides of the ribs.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.605-612
• /
• 2016

In this study, numerical simulations were conducted for conjugate heat transfer around ice balls in an encapsulated ice thermal storage system. Four shapes of ice balls were modeled; the default one was a sphere, and the other three shapes were designed to enhance convective heat transfer through the ball surface. The flow around the ball was laminar, for which the Reynolds number was 300, and both forced and natural convections inside and outside the balls were considered. The simulations revealed that the magnitude of convective heat transfer for the different shapes decreased in the following order: bone, dimple, hole, and sphere. For the entire simulation, the maximum difference in the average temperatures of water inside the capsules was found to be $0.9^{\circ}C$. Therefore, it can be said that the effect of ice-ball shape on the performance of the ice thermal storage system is significant, considering that more than 0.3 million balls are used in this system.

• Journal of computational fluids engineering
• /
• v.7 no.3
• /
• pp.35-43
• /
• 2002

This paper addresses a numerical method for predicting transient temperature distributions in the wall of a curved pipe subjected to internal laminar thermally-stratified flow. A simple and convenient numerical method of treating the unsteady conjugate heat transfer in non-orthogonal coordinate systems is presented. Numerical calculations are performed for the transient evolution of thermal stratification in two curved pipes, where one has thick wall and the other has so thin wall that its presence can be negligible in the heat transfer analysis. The predicted results show that the thermally stratified flow and transient conjugate heat transfer in a curved pipe with a finite wall thickness can be satisfactorily analyzed by the present numerical method, and that the neglect of wall thickness in the prediction of pipe wall temperature distributions can provide unacceptably distorted results for the cases of pipes with thick wall such as safety related-piping systems of nuclear power plant.