• Composites Research
• /
• v.34 no.4
• /
• pp.264-268
• /
• 2021

In this study, we propose a method for fabricating hydrophobic coatings/films with three-dimensional (3D) hierarchical nanostructured organic/inorganic composite surfaces. An epoxy-based, large-area 3D ordered nanoporous template is first prepared through an advanced photolithography technique called Proximity-field nanoPatterning (PnP). Then, a hierarchically structured surface is generated by densely impregnating the template with silica nanoparticles with an average diameter of 22 nm through dip coating. Due to the coexisting micro- and nano-scale roughness on the surface, the fabricated composite film exhibits a higher contact angle (>137 degrees) for water droplets compared to the reference samples. Therefore, it is expected that the materials and processes developed through this study can be used in various ways in the traditional coating/film field.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.223-229
• /
• 2010

We investigated the effects of processing geometry of silica-filled isobutylene-isoprene rubber (IIR) compounds on its mechanical properties and silica dispersion, using a two roll mill and an internal mixer (banbury mixer). The compound processed with the two roll mill showed the longer induction time ($t_2$), higher maximum torque ($T_{max}$), and better silica dispersion than the compound processed with the internal mixer; however, showed slightly the lower cure index ($t_{90}$). The mechanical properties (hardness, 300% modulus, tensile strength, elongation) of the compound processed with two roll mill were higher than compound done with the internal mixer.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.113-124
• /
• 2021

Underground environmental infrastructure and energy production facilities, which are recognized as avoidable facilities such as landfills, are emerging as an important social issue due to urbanization and economic growth. In order to safely construct a large-scale plant facility in the underground space, it is necessary to increase the utilization of the limited space layout and minimize unnecessary columns. In this study, the plant modularization method(Pipe Rack Module) was reviewed to solve the problems of work constraints, assembly and demolition, process system interconnection, and maintenance that occur when plant facilities are underground. In addition, plant module analysis was performed by applying various load conditions (earthquake load, device load, earth pressure load, etc.) to improve spatial layout usability and secure structure stability. Based on the analysis results under various boundary condition, the implications regarding the minimum installation interval and module arrangement (draft) of basic modules required for the construction of an underground combined plant were derived.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.557-560
• /
• 2008

Fiber reinforcement has been being widely used in concrete to enhance the mechanical properties and to reduce the micro-cracking caused by plastic and drying shrinkage. While researches has been focused on the benefits of fiber reinforcement, the properties of fiber reinforced concrete are strongly dependent on the type, shape and the amount of fibers in concrete. In this study, the resistance of nylon fiber reinforced concrete against the chloride ion penetration was experimentally observed by NT Build 492. The test results showed that the addition of nylon fiber has little effect on the change of the resistivity of concrete to the chloride ion penetration.

• Journal of the Korea Convergence Society
• /
• v.9 no.6
• /
• pp.89-98
• /
• 2018

To confirm the feasibility as raw materials for cosmetic formulation, ethanol, n-hexane, ethylacetate and normal butyl alcohol were extracted from 1kg of Ginko leaves. Ultimately, investigated chemical structure and physicochemical properties of ginkgetin and isoginkgetin. The purity of those two components have been evaluated higher than 99%. They are isomers with molecular weight as 566 and a molecular formular, $C_{32}H_{22}O_{10}$. Flavonoid's frame and NMR spectrum exhibited the existence of aromatic proton and the proper ratio of the carbon, which were expected structures exactly corresponded to the reported references.

• Composites Research
• /
• v.24 no.3
• /
• pp.39-45
• /
• 2011

Adhesive joints are widely used for structural joining applications in various fields and environmental conditions. Polyurethane (PU) and Epoxy adhesives are now being used for liquefied natural gas (LNG) carriers at cryogenic temperatures. This paper presents a comprehensive evaluation of epoxy and PU adhesive bonds between Triplex sheets at normal and cryogenic temperatures. The most significant result of this study is that for all adhesives tested, there is a significant decrease in peel strength at cryogenic temperatures. However, the reasons for the decrease in peel strength for epoxy and PU adhesives differ. Consequently, PU adhesives can be considered better suited for use in applications requiring high bonding performance at cryogenic conditions, such as in LNG carriers.

• Composites Research
• /
• v.31 no.5
• /
• pp.227-237
• /
• 2018

In this paper, the design application for the lightweight and insulation of the manipulator of the mobile welding robot for the closed/narrow space is presented. A variety of robotic platforms have been developed for weld-worker using a welding robot outside a workpiece for welding work in a complex and narrow space such as a ship or an offshore plant. Normally, The development process of robots consists of machine development, electronic device development, control algorithm development and integration verification considering application environment and requirements. In order to develop the robustness of the welding robot, the lightweight design of the robot manipulator considering the environmental conditions was performed in the basic design of the robot platform. Also, The results of the robot selection and validation, analysis and testing for the insulation performance and cooling performance and the results of the research are shown.

• Composites Research
• /
• v.35 no.6
• /
• pp.447-455
• /
• 2022

Currently, the problem of pollution of the marine environment by microplastics is emerging seriously internationally. In this study, to develop a lightweight portable microplastic collection device, the types and number of microplastics in 21 coastal areas nationwide in Korea were investigated. And CFRP (Carbon Fiber Reinforced Plastic), GFRP (Glass Fiber Reinforced Plastic), ABS (Acrylonitrile Butadiene Styrene copolymer) and aluminum were applied for design and analysis of microplastic collection device to have the durability, corrosion resistance and lightweight. As a result of sample collection and classification from the shore, it was confirmed that microplastics were distributed the most in Hamdeok beach, and the polystyrene was found to be mainly distributed microplastics. Particle information through coastal field survey and CFD (Computational Fluid Dynamics) analysis were used to analyze the flow rate and distribution of particles such as sand and impurities, which were applied to the structural analysis of the cyclone device using the finite element method. As a result of structural analysis considering the particle impact inside the cyclone device, the structural safety was examined as remarkable in the order of CFRP, GFRP, aluminum, and ABS. In the view of weight reduction, CFRP could be reduced in weight by 53%, GFRP by 47%, and ABS by 61% compared to aluminum for the cyclone device.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.98-98
• /
• 2003

무순에는 비타민 C가 많이 들어 있어 겨울철 비타민 공급원뿐만 아니라 디아스타제라는 효소가 들어 있어 소화를 촉진시키는 역할을 한다. 그 외에도 거담제 및 건위제 작용을 하고 음주로 인한 토혈해소, 천식에도 좋아 약용하기도 한다. 본 연구에서는 이용가치는 적지만 농가 소득증대에 기여 할 수 있으며 소화를 촉진시키는 무순, 또는 무싹기름이라고 일컬어지는 무순을 추출용매에 따라 생리활성 효과 분석하고 영양학적 가치가 가장 높은 시기의 무순을 선택함으로써 올바른 섭취의 기초자료를 마련하고 그 기능성을 확인하여 기능성 식품소재 및 기능성 화장품 소재로써의 활용을 검토하고자 하고자 한다. 무순을 4일, 8일, 12일에 따라 incubator에 배양하여 시기별로 채취하여 동결건조 한 후 70% Ethanol, 80% Methanol, 75% acetone, 열수로 환류 추출한 후 시료로 사용하였다. 각 용매 추출물에 대해 DPPH free radical 소거능 실험에서는 acetone 추출물에서 89.18%로 가장 높은 전자공여능을 나타냈으며 각각의 추출용매에서 성장 4일과 12일의 무순에서 높은 전자공여능을 보였다. 아질산염 소거능에서는 pH 1.2의 조건에서 가장 높은 아질산염 소거능을 보였고, 열수 추출물에서 89.70%로 가장 높은 소거능을 보였다. pH 4.2조건에서는 열수추출물의 소거능이 가장 좋았고, pH 6.0 조건에서는 가장 낮은 소거능을 보였으며, Ethanol 과 Methanol 추출물에서 23.55∼37.41%의 소거능을 보였다. SOD유사활성은 성장 8일에서 모두 낮은 활성을 보였으며, 성장 4일과 성장 12일의 무순에서는 큰 차이를 보이지 않았지만, Methanol 추출물중 성장 12일에서 27.41%의 SOD유사활성을 보였다.ic acid는 28.8∼51.7 mg%, 미강에서 321.4∼438.4 mg% 범위로 나타났다. 현미, 백미 및 미강에 함유된 총 폴리페놀의 함량을 표준 페놀화합물로 카테친을 사용하고 비색법에 의하여 측정하였을 때 오대 현미의 폴리페놀 함량은 78.4 mg%, 남평 현미 88.8 mg% 였다. 도정한 백미 중의 총 폴리페놀 함량은 30.3∼56.9 mg%, 미강이 541.5∼472.6 mg%의 범위였다. 이상과 같이 쌀에는 phenolic acid 및 총 폴리페놀이 상당량 함유되어 있으며 특히 배유보다는 강층에 많이 존재하므로 이들 성분의 효율적인 이용을 위한 쌀의 섭취방안이 필요한 것으로 나타났다. 유의적인 상관관계를 나타내고 있어 백편의 조직감은 Compression force 와 Work ratio로 대치할 수 있을 것이라고 사료된다. 수분함량은 기계적 검사보다 관능검사와 더욱 높은 상관관계를 나타냈다.내었다. 항균활성이 우수한 생약재를 농도별로 활성을 조사한 결과, 물 추출물과 10% Ethanol 추출물 모두 낮은 농도에서도 우수한 항균활성을 나타내었다.취와 함께 점질성 갈변물질이 생성되었다. 이와 같은 결과로 볼 때, BAAG의 처리는 BAAC의 경우보다 가격은 저렴하면서도 항균력은 우수한 천연 항균복합제재로써 농산물 식품원료에 적용하여 선도유지 기간을 연장할 수 있는 효과를 기대할 수 있었다. 과일 등의 포장제로서 이용할 가능성을 확인하였다.로 [-wh] 겹의문사는 복수 의미를 지닐 수 없 다. 그러면 단수 의미는 어떻게 생성되는가\ulcorner 본 논문에서는 표면적 형태에도 불구하고 [-wh]의미의 겹의문사는 병렬적 관계의 합성어가 아니라 내부구조를 지니지 않은 단순한 단어(minimal $X^{0}$ elem

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.5
• /
• pp.443-451
• /
• 2013

Acoustic emission(AE) has emerged as a powerful nondestructive tool to detect any further growth or expansion of preexisting defects or to characterize failure mechanisms. Recently, this kind of technique, that is an in-situ monitoring of inside damages of materials or structures, becomes increasingly popular for monitoring the integrity of large structures like a huge wind turbine blade. In this study, the activities of AE signals generated from external artificial sources was evaluated and located by new developed signal mapping source location method and this test is conducted by 750 kW full-scale blade. And a new source location method was applied to assess the damage in the wind turbine blade during step-by-step static load test. In this static loading test, we have used a full scale blade of 100 kW in capacity. The results show that the acoustic emission activities give a good agreement with the stress distribution and damage location in the blade. Finally, the applicability of the new source location method was confirmed by comparison of the result of source location and experimental damage location.