• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.416-416
• /
• 2018

본 연구는 과거자료와 기후변화 시나리오의 강수자료를 고려하여 유역 간 도수 사업의 용수공급량을 효과적으로 결정하는 방안을 제안하였다. 1985년 1월 ~ 2017년 6월까지 과거자료와 2011년부터 2100년까지의 RCP(Representative Concentration Pathway) 4.5 및 8.5 시나리오에 대해 각각 적용하였다. 청미천의 유량은 SWAT 모형을 이용하였는데 SUFI-2 알고리즘을 이용하여 최적 매개변수를 산정하였다. 본 연구는 도시 농촌 복합유역인 청미천 유역을 대상으로 하였으며 국토교통부가 고시한 원부교 지점의 하천 유지유량($0.96m^3/s$)의 연간 불만족일수를 분석하였다. 청미천 유역을 대상으로 현재 설치하고 있는 약 $30,000m^3$/일 규모의 용수 공급시설의 적용에 따른 불만족일수에 대하여 과거 강우자료를 이용하여 분석한 결과, 시설 적용 전 불만족 일수는 평균 54.94일/년이었고 적용 후에는 불만족일수가 평균 45.33일/년으로 10.61일/년이 감소하였다. 미래 기후변화 시나리오에 대해 분석하면 적용 전의 RCP 4.5의 평균 불만족일수는 65.99일/년이며 적용 후에는 11.82일/년이 감소한 54.17일/년으로 나타났다. RCP 8.5에서는 평균 불만족일수는 49.16일/년에서 39.16/년일 으로 10.0일/년이 감소하였다. 즉 현재 사업규모로는 하천유지유량 만족일수가 여전히 큰 것으로 나타났다. 따라서 본 연구에서는 기후변화 시나리오를 고려하여 최소최대후회도 접근법을 토대로 효과적인 유지 용수공급량을 결정하는 방법을 적용하였다. 단위 용수공급량이 증가할 때마다 늘어나는 불만족일수 감소량에 대해 연도별로 다른 값 중에 최댓값과의 차이를 후회도로 정의하고 용수공급량 별로 최대 후회도를 산정하였다. 이 중 최솟값을 나타내는 용량을 선택한 결과 RCP4.5는 $110,000m^3$/일, RCP8.5는 $90,000m^3$/일로 도출되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.315-315
• /
• 2023

급격한 기후변화에 기인하여 전 세계적으로 거듭되는 돌발홍수로 인한 피해가 급격히 증가하고 있는 실정이다. 우리나라에서도 최근 중소 규모의 하천 뿐 아니라 도시 생활하천, 도심지 저지대에서 갑작스런 홍수와 침수로 인해 많은 인명과 재산 피해를 경험하고 있다. 이런 문제를 인식하여 최근 정부차원에서 다양한 센서와 인공지능에 기반하는 많은 인프라 및 연구 투자가 이루어지고 있지만, 높은 설치 및 운영 비용과 우리나라의 복잡한 하천 환경 특성으로 인해 소하천이나 도심지 저지대에서는 그 효율성을 제대로 발휘하지 못하고 있다. 따라서 본 논문에서는 주변환경의 변화에 강인한 복합 센서단말을 통해, 하천 정보(유량, 유속, 수위 등)을 실시간 측정하고, 해당지역의 특성을 고려한 하천 또는 저지대의 위험도를 스스로 판단할 수 있는 기술을 제안한다. 또한, 본 논문에서는 제안한 저비용 초소형의 단말 장치로 지점의 하천 정보를 실시간 측정하여 IoT망을 통해 3차원 하천 디지털트윈 모델로 전달하여, 유속과 수위를 그대로 재연함으로써, 하천 침수 위험 감시의 효율성을 검증하였다. 3차원 DEM(Digital Elevation Models) 데이터와 실제 하천을 관측한 데이터를 이용한 디지털트윈 검증 결과, 데이터 전송 지연시간을 감안하여 3초 이내에 하천의 수위와 유속이 3차원 모델에 반영되는 것을 확인하였다. 이 결과로부터 열악한 환경에서도 실시간 하천 상황을 원거리에서 모니터링 할 수 있으며, 강우와 유출에 따른 하천 홍수 메카니즘을 새롭게 시뮬레이션할 수 있는 방법론을 제시할 수 있을 것으로 기대한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.293-296
• /
• 2021

K-water에서는 다목적댐의 관리를 위해 실시간으로 댐수위, 하천 수위 및 강우량 등을 계측하고 있으며, 계측된 값들은 댐을 효과적으로 운영하는데 필요한 데이터로 활용되고 있다. 특히 댐수위 이상 데이터를 탐지하지 못한 채 그대로 사용할 경우 댐의 방류 시기와 방류량 등을 결정하는 중요한 의사결정을 그르칠 수 있으므로 이를 신속히 탐지하는 것이 매우 중요하다. 현재의 자동화된 이상 데이터 탐지방법 중 하나는 현재 데이터가 최댓값과 최솟값을 초과할 때, 다른 하나는 현재 데이터와 일정 시간 동안의 평균값 간의 차이가 관리자가 정한 특정 값을 벗어났을 때를 기준으로 삼고 있다. 전자는 상한과 하한의 초과 여부만 판단하므로 탐지가 쉬우나 정상범위 내에서 발생한 이상 데이터는 탐지가 불가하다. 후자는 관리자의 경험을 통해 판단 조건을 정하기 때문에 객관성이 결여되는 문제가 있다. 특히 방류와 강우가 복합적으로 댐수위에 영향을 미치는 홍수기에 관리자의 경험에 기초한 이상 데이터 판별은 신뢰성의 문제가 있을 수 있다. 따라서 본 연구에서는 기계학습을 최초로 적용하여 이상 데이터를 탐지하고자 하였다. 댐수위, 누적강우량 및 누적방류량 데이터와 댐수위데이터를 가공하여 생성한 댐수위차, 댐수위차평균, 댐수위평균 등 자질들의 다양한 조합을 만든 후 이를 Random Forest, SVM, AdaptiveBoost 및 다층퍼셉트론(MLP) 등과 같은 여러 가지 기계학습모델 등을 통해 이상 데이터를 판별하는 실험(분류)을 하였다. 실험결과 댐수위, 댐수위차, 댐수위-댐수위평균, 누적강우량, 누적방류량 및 댐수위차평균을 사용하였을 때 MLP에서 가장 우수한 성능을 보였다. 이 연구를 통해서 댐수위 이상 데이터를 기계학습의 분류기능을 통해 효과적으로 탐지할 수 있다는 것과 모델의 성능은 실험에 사용한 자질의 수뿐 아니라 자질의 종류에도 큰 영향을 받는다는 것을 알 수 있었다.

• Composites Research
• /
• v.37 no.3
• /
• pp.143-149
• /
• 2024

This paper measures the mechanical properties of corrugated cardboard, an eco-friendly packaging material, and applies these measurements to the MAT_PAPER model in LS-DYNA for finite element analysis. Although MAT_PAPER is primarily designed for modeling the behavior of paper, this research demonstrates its applicability to corrugated cardboard as well. Tensile, compression, and shear behaviors of a corrugated cardboard were measured and analyzed, and based on these results, six yield surfaces were derived and integrated into the MAT_PAPER model. By comparing the finite element analysis of the material tests and the low velocity collapse analysis of the corrugated cardboard square boxes with each experimental results, it was shown that the behavior of corrugated cardboard could be equivalently considered well by the MAT_PAPER model. However, since the model is not rate-dependent, the high strain rate properties of liner materials were measured and used for strain rate correction. Consequently, this matches well with the results of the high-speed compression tests of the corrugated cardboard square boxes.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.4
• /
• pp.397-404
• /
• 2008

Excessive amount of groundwater flowed into tunnel, while constructing Incheon international airport railway. Tunnel passes under subway line no. 2 with only 1.76 m below. To protect the existing structure, TRcM excavation method was applied. As station and construction shaft are already constructed, which are located back and forth of TRcM section, 86.4 ton per day of groundwater inflow is against expectation. To identify mechanism of excessive water inflow, hydraulic back analyses were performed. Then, hydro-mechanical coupled analysis were also performed with the hydrogeologic parameters identified, whose results are investigated for checking the stability of adjacent structures to the tunnel under construction. And a number of mechanical analyses were also performed to check the hydro-mechanical coupling effect. The result from the mechanical analysis shows that subsidence and tunnel ceiling displacement will be 0.85 mm and 1.32 mm. The result of hydro-mechanical couple analysis shows that subsidence and maximum tunnel ceiling displacement will be 1.2 mm and 1.72 mm. Additional displacements caused by groundwater draw down were identified, however, displacement is minute.

• Water for future
• /
• v.19 no.1
• /
• pp.65-74
• /
• 1986

The purpose of this study was to investigate the applicability of Single Linear Reservoir (SLR) model for runoff computations of small river basins in Korea. In the existing watershed flood routing methods the storage coefficient(K), which is the dominant parameter in the model, has been proposed to be computed in terms of the wqtershed characteristics. However, in the prsent study, the rainfall characteristics in addition to the watershed characteristics were taken into account in the multiple regression analysis for more accurate estimation of storage coefficient. The parameters finally adopted for the regressions were the drainge are, mean stream slope of the watershed, and the duration and total dffective amount of rainfalls. To verify the applicability of SLR model the computed results by SLR model with K determined by the regression equation were compared with the observed gydrographs, and also with those by other runoff computation methods; namely, the Clark method, nakayasu's synthetic unit hydrograph method and Nash model. The results showed that the present zSLR model gave the best results among these methods in the case of small river basins, but for the whatersheds with significant draingage area the Clark method gave the best results. However, it was speculated that the SLR model could also be accurately applied for flood compuatation in large wagersheds provided that the regression for storage coefficients were made with the actual data obtained in the large river basins.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.727-739
• /
• 1998

The main objectives o reservoir optimal operation can be described as follows : maximization of the benefits through optimal allocation of the limited water resources for various purpose; minimization of t도 costs by the flood damage in potential damaging regions and risk of dam failure, etc. through safe drainage of a bulky volume of excessive water by a proper reservoir operation. Reviewing the past research works related to reservoir operation, we can find that the study on the matter of the former has been extensively carried out in last decades rather than the matter of the latter. This study is focused on developing a methodology of optimal reservoir operation for flood control, and a case study is performed on the Chungju multipurpose reservoir in Korea. The final goal of the study is to establish a reservoir optimal operation system which can search optimal policy to compromise two conflicting objectives: downstream flood damage and dam safety-upstream flood damage. In order to reach the final goal of the study, the following items were studied : (1)validation of hydrological data using HYMOS: (2)establishment of a downstream flood routing model coupling a rainfall-runoff model and SOBEK system for 1-D hydrodynamic flood routing; (3)replication of a flood damage estimation model by a neural network; (4)development of an integrated reservoir optimization module for an optimal operation policy.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.87-94
• /
• 2015

Plastic artwork can be appeared crack, change of color and whitening event by various environment conditions. A large scale plastic artwork often exhibits in outside it will be directly degraded by physical and chemical degradation factor such as strong sunlight, high humidity and rainfall. We should know degradation characteristic of plastics to prevent these damages. In this study, we studied degradation characteristic of plastics (5 types of wide use plastics; polypropylene, polystyrene, polyethylene, polyvinyl chloride, polyurethane) depending on various artificial degradation conditions such as high temperature, ultraviolet and these complex conditions (high temperature and ultraviolet). As a result, polypropylene, polystyrene and polyethylene show the most visible change especially polypropylene, polystyrene. Polypropylene didn't show a great change degree of tensile strength and contact angle, on the other hand polystyrene did. Polypropylene and polystyrene weakened by photo degradation, polyvinyl chloride and polyurethane had relatively good light stability. Also the high temperature and complex conditions were most degradation characteristic. High temperature worked for degradation catalyst because its energy can not enough worked for cut off binding energy of plastics while ultraviolet condition effected as directly degradation condition. Though following results, we expect it can be applied to investigation of degradation factor depending on plastic artwork materials and basic result of plastic artworks conservation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4656-4663
• /
• 2010

In this study, the 3D computational fluid dynamics (CFD) was performed in relation to the internal fluid characteristics, flow distribution, air mean ages, and residence time for the development of the most optimal model in the complex post-disposal device. As it is expected that a channeling (drift) would be made by the semi-dry reactor due to the large difference in the flow distribution by the compartment in the bag filter, a structural improvement should be urgently made for more uniformed flow distribution in the bag filter. In addition, it showed the possibility that the velocity field and distribution characteristics of the residence time could be improved through a modification to inlet structure of the spray dryer reactor. The complex post-disposal device, modified and supplemented with this analysis, integrated the semi-dry reactor and the bag filter in a single body, so it follows that the improvement can make the device compact, the installation area, the operation fee, and management more convenient.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.2
• /
• pp.71-76
• /
• 2019

Recently, the demand of labels for product management is increasing, as the automation system becomes more common. the development of functional labels which can be used in various environments has been rapidly proceeded. In the case of a printed circuit board, barcode labels with thermal and chemical stability are generally used due to a high temperature process around $300^{\circ}C$ and chemical cleaning in the manufacturing process. However, the yellowing phenomenon of labels that can lower the resolution of printed barcode image still needs to be prevented. In this study, we prepared a composite coating layer using a silica inorganic binder and a titanium dioxide white pigment, and developed a functional labels with thermal and chemical stability. The silica inorganic binder prepared by sol-gel process was confirmed to show excellent adhesion and abrasion resistance with the polyimide film. The white coating layer could be formed on the polyimide film with mixing the silica inorganic binder and titanium dioxide white pigment. The prepared coating layer showed excellent whiteness and glossiness above $400^{\circ}C$. The excellent chemical stability of the coating layer was also confirmed by the chemical treatment with acidic (pH 1.6) and basic (pH 13.6) cleaners.