• The Journal of the Korea Contents Association
• /
• v.16 no.6
• /
• pp.123-134
• /
• 2016

As the internet of things has come into the spotlight, wearable devices have been emerging as a new and growing market and the next hot thing in the world. However, wearable device growth in the market has not met expectations. For continued growth and diffusion of wearable devices, it is important to investigate user resistance factors to them. This study gives attention to people who have resistance to wearable devices' tendency towards innovative uses. Specifically, this study is intended to find out which factors influence consumers' resistance and intention to use wrist-worn wearable devices, which are in high demand among wearable device. Results of the study show that the relative advantage, innovation expectation, complexity, financial risk and physical risk are the predictors of innovation resistance on wrist-worn wearable devices. And consumers' resistance affects the intention of positive acceptance. These findings confirm the importance of consumer resistance to the wrist-worn wearable device.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.3-12
• /
• 2016

Recently, the study on 5G mobile communication systems using the millimeter-wave frequency band have been actively promoted and the importance of compensation of the nonlinearity of power amplifier caused by the characteristics of millimeter-wave frequency propagation attenuation is increasing. In the paper, we propose a piecewise polynomial model based on subdivision coefficient which are characteristics of power amplifier separated linear section and a non-linear section. In addition, the structure of digital predistortion based on the proposed model and direct learning method are proposed to implement a digital predistortion. To verify the proposed model, digital predistortion based on the proposed model and direct learning method for 60 GHz power amplifier using LTE signal implemented in the FPGA. And the hardware test bench measured performance and complexity. The proposed model achieves 3.3 dB gain over the single polynomial model in terms of the ACLR and reduces 7.5 percent in terms of the complexity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.200-209
• /
• 2019

When forecasting future values, a model estimated after minimizing training errors can yield test errors higher than the training errors. This result is the over-fitting problem caused by an increase in model complexity when the model is focused only on a given dataset. Some regularization and resampling methods have been introduced to reduce test errors by alleviating this problem but have been designed for use with only a given dataset. In this paper, we propose a new optimization approach to reduce test errors by transforming a test error minimization problem into a training error minimization problem. To carry out this transformation, we needed additional data for the given dataset, termed pseudo data. To make proper use of pseudo data, we used three types of missing data imputation techniques. As an optimization tool, we chose the least squares method and combined it with an extra pseudo data instance. Furthermore, we present the numerical results supporting our proposed approach, which resulted in less test errors than the ordinary least squares method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.63-72
• /
• 2020

As the design complexity and performances are increased in satellite electronic board, noise related problems are also increased. To minimize the noise issues, various design improvements are performed by power integrity and signal integrity analysis in this research. Static power and dynamic power design are reviewed and improved by DC IR drop and power impedance analysis. Signal integrity design is reviewed and improved by time domain signal wave analysis and PCB(Printed Circuit Board) design modifications. And also power planes resonance modes are checked and mitigation measures are verified by simulation. Finally, it is checked that radiated noise is reduced after design improvements by EMC(Electro Magnetic Compatibility) RE(Radiated Emission) measurement results.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.569-572
• /
• 2022

본 논문에서는 공기 메쉬(Air meshes)를 이용하여 고체의 충돌을 효율적으로 처리할 수 있는 새로운 방법을 제시한다. 기존의 프리미티브 단위의 충돌 처리는 시뮬레이션의 안정성을 높이기 위해 시간 간격(Time-step), 3차 방정식과 같은 큰 계산 과정을 필요로 했으며, 장면 복잡도에 따라 DCD(Discrete collision detection)뿐만 아니라 CCD(Continuous collision detection)까지 고려해야 되는 상황이 빈번히 발생한다. 본 논문에서는 이전에 제안된 공기 메쉬 기법을 통해 충돌처리를 효율적으로 개선시킬 수 있는 방법에 대해서 제안한다. 원본 공기 메쉬 접근법은 시뮬레이션 메쉬가 아닌, 주변 공기를 메쉬화시키고 이들의 변형을 부피로 근사하여 충돌 여부 및 처리를 인지하고 예측했다. 공기 메쉬를 정제하는 과정에서 수치적인 수렴을 위해 정삼각형을 유지하려는 제약사항을 두었다. 하지만, 이러한 방법은 장면에 따라 노이즈한 결과를 나타내며, 헤어나 털 시뮬레이션과 같은 라인 형태인 시뮬레이션에서는 경계 문제가 더욱더 민감하게 나타났다. 본 논문에서는 공기 메쉬를 정제하는 과정에서 새로운 제약 조건을 추가하여 노이즈가 완화된 충돌처리 결과를 보여준다. 우리의 헤어뿐만 아니라 대부분의 장면에서 안정적인 결과를 보여준다.

• Management & Information Systems Review
• /
• v.29 no.4
• /
• pp.333-357
• /
• 2010

Purposes of this paper are to investigate whether managers' compensation is sticky as accounting performance(ROA) vary or not and explore further what factors influence the managers' compensation stickiness. To empirically study the stickiness of managers' compensation, we used the financial data from manufacturing firms lised in the Korea Stock Exchange(1,000 firm-year data for 4 years). The results are as follows : First, managers' compensation is sticky with respect to change in accounting performance. That is, the increase in managers' compensation as accounting performance increases is greater than the decrease in managers' compensation in respect to equivalent decrease in accounting performance. Second, the degree of managers' compensation stickiness increases when managers have influence and contribution to firm value. Specifically, the degree of stickiness is positively associated with investment opportunity set, intangible assets' value, uncertainty of firms' operating environment, complexity of organizational hierarchy. But firms' size reversely impacts on the degree of managers' compensation stickiness.

• Journal of Hospice and Palliative Care
• /
• v.19 no.2
• /
• pp.109-118
• /
• 2016

The purpose of this study was to evaluate Korean advance directives (K-AD) by examining the degree of adults' acceptance and reliability of the directive itself. Methods: Survey was performed with 181 adults aged 20 or older who were recruited from three regions. A questionnaire used to examine the participants' acceptance of their K-AD in terms of visual analogue scale score of complexity, difficulty, necessity, satisfaction, recommendation. Then, a retest was carried out by asking participants to write up a K-AD again to confirm the reliability of the directives. Results: On a scale of 100, the average acceptance score was 70 or above, which represents rather high level of acceptance in all five categories. The test-retest reliability kappa values ranged from 0.592 to 0.950, and the conformity degree was moderate or high. Regarding K-AD components such as values, treatment preference, proxy appointment, differences among age groups were observed in each component. Conclusion: The results of this study suggest that K-AD is a feasible instrument to analyze its acceptability and reliability for adult population. K-AD could be utilized to help people make their own decision on their end-of-life care. Further studies are needed to confirm this study results and promote widespread use of K-AD.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.163.1-163.1
• /
• 2010

2030년까지 신재생에너지발전 비중을 11%로 높이겠다는 정책목표 달성을 위한 정부의 지원방안이 현행 발전차액지원제도(FIT)에서 2012년부터는 신재생에너지의무할당제(RPS)로 전환된다. 전원별로 정해진 발전량에 대해 정부가 일정한 가격으로 구매해주는 현행 제도 하에서 신재생에너지발전사업자는 중장기 가격을 보장받음으로써 수익성을 초기에 확정할 수 있는 장점이 있는 반면 정부 입장에서는 보급이 확대될수록 막대한 재정부담이 발생하고 경쟁을 통해 생산 비용을 낮추기 위한 유인이 부족한 단점이 있다. 이러한 단점을 보완하기 위해 도입되는 의무할당제는 일정 설비규모 이상의 발전사업자에게 신재생에너지발전 의무량을 부과하고 의무대상자가 의무이행의 수단으로 공급인증서(REC)를 발급받거나 구매하여 의무를 이행토록 하는 제도로서 공급인증서 가격 결정을 시장기능에 맡김으로써 신재생에너지 사업자간 경쟁을 촉진시켜 생산비용을 절감하고 정부의 재정부담을 완화하는 장점이 있는 반면 신재생에너지발전사업자 입장에서는 수익성 분석이 복잡해지고 리스크가 증가하는 문제점이 있다. 특히 발전용 연료전지를 활용한 발전사업의 경우 다른 신재생에너지원과 달리 설비투자비용(CAPEX) 외에 가스요금 및 핵심부품의 주기적인 교체 등을 위한 운영비용(OPEX)의 비중이 작지 않기 때문에 더욱 정밀한 분석이 필요하다. 본 연구에서는 신재생에너지발전사업자 입장에서 비용과 편익에 영향을 미치는 각 요소와 그 영향을 파악함으로써 발전용 연료전지의 경제성 분석을 시도해 보았다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.9-18
• /
• 2007

This study shows an implementation of partial holes in an initial design domain in order to improve convergences of topology optimization algorithms. The method is associated with a bubble method as introduced by Eschenauer et al. to overcome slow convergence of boundary-based shape optimization methods. However, contrary to the bubble method, initial holes are only implemented for initializations of optimization algorithm in this approach, and there is no need to consider a characteristic function which defines hole's deposition during every optimization procedure. In addition, solid and void regions within the initial design domain are not fixed but merged or split during optimization Procedures. Since this phenomenon activates finite changes of design parameters without numerically calculating movements and positions of holes, convergences of topology optimization algorithm can be improved. In the present study, material topology optimization designs of Michell-type beam utilizing the initial design domain with initial holes of varied sizes and shapes is carried out by using SIMP like a density distribution method. Numerical examples demonstrate the efficiency and simplicity of the present method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.105-114
• /
• 2018

In this paper, the computer simulations are carried out by using the peridynamic theory model with various conditions including quasi-static loads, dynamic loads and crack propagation, branching crack pattern and isotropic materials, orthotropic materials. Three examples, a plate with a hole under quasi-static loading, a plate with a pre-existing crack under dynamic loading and a lamina with a pre-existing crack under quasi-static loading are analyzed by computational simulations. In order to simulate the quasi-static load, an adaptive dynamic relaxation technique is used. In the orthotropic material analysis, a homogenization method is used considering the strain energy density ratio between the classical continuum mechanics and the peridynamic. As a result, crack propagation and branching cracks are observed successfully and the direction and initiation of the crack are also captured within the peridynamic modeling. In case of applying peridynamic used homogenization method to a relatively complicated orthotropic material, it is also verified by comparing with experimental results.