• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.9-18
• /
• 2008

Recently according to the development of an information society the information technology equipments which a clock frequency has the facility over a number giga hertz have been developed much. And we have research which leakage electromagnetic signals can use at the communication security and tapping. In this paper, we restored leakage electromagnetic signals of the monitors. And we proposed efficient recovery technique to restore the screen of the monitor. First of all, we understand a screen characteristic of the monitor. And then we restored a monitor screen from leakage electromagnetic signals from the monitor. For also we tried to use a Wavelet transform and filters to remove the noise for better performance. In the result of the experiment, we used leakage electromagnetic signals and confirmed the possibility of a monitor screen of the recovery. And we improve the performance with Wavelet transform and filters.

• Journal of KIISE:Information Networking
• /
• v.31 no.3
• /
• pp.298-304
• /
• 2004

In transmitting a compressed video bit-stream over Internet, a packet loss causes an error propagation in both spatial and temporal domain, which in turn leads to a severe degradation in image quality. In this paper, a new error concealment algorithm is proposed to repair damaged portions of the video frames in the receiver. Conventional BMA(Boundary Matching Algorithm) assumes that the pixels on the boundary of the missing block and its neighboring blocks are very similar, but has no consideration of edges t)r discontinuity across the boundary. In our approach, the edges are detected across the boundary of the lost or erroneous block. Once the edges are detected and the orientation of each edge is found, only the pixel difference along the expected edges across the boundary is measured instead of calculating differences between all adjacent pixels on the boundary. Therefore, the proposed approach needs very few computations and the experiment shows an improvement of the performance over the conventional BMA in terms of both subjective and objective quality of video sequences.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.79-87
• /
• 2011

In this study, the chloride penetration tests were performed for the initially cracked reinforced concrete members. The chloride diffusion characteristics and the critical crack width are compared, and the properties of self-healing are investigated. According to the test results, the chloride penetration resistance was greatly reduced as the surface crack width increased. When the mineral admixtures are added, the chloride penetration resistance of uncracked specimens were effectively increased, however, in case of the blast furnace slag and fly ash, the cracked specimens showed the more reduced resistance than OPC case, inversely. Also, the critical width was $29{\mu}m$, on average, for immersion test. The crack width with $4{\sim}15{\mu}m$ was restored by self-healing, The parts restored by self-healing were seemed to be visually restored, however, the chloride penetration resistance was not restored, perfectly.

• Korean Journal of Optics and Photonics
• /
• v.19 no.4
• /
• pp.270-275
• /
• 2008

This paper addresses occluded object reconstruction and recognition with computational integral imaging (II). Integral imaging acquires and reconstructs target information in the three-dimensional (3D) space. The reconstruction is performed by averaging the intensities of the corresponding pixels. The distance to the object is estimated by minimizing the sum of the standard deviation of the pixels. We adopt principal component analysis (PCA) to classify occluded objects in the reconstruction space. The Euclidean distance is employed as a metric for decision making. Experimental and simulation results show that occluded targets are successfully classified by the proposed method.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.5
• /
• pp.229-236
• /
• 2023

Since 3D printed medical implant parts usually have surface defects, it is necessary to inspect the surface after manufacturing. In order to automate the surface inspection, it is effective to 3D scan the implant and reconstruct it as a scan model such as a point cloud. When constructing a scan model, the characteristics of the shape and material of the implant must be considered because it has characteristics different from those of general 3D printed parts. In this paper, we present a method to reconstruct the 3D scan model of a 3D printed metal bone-plate that is one kind of medical implant parts. Multiple partial scan data are produced by multi-view 3D scan, and then, we reconstruct a scan model by alignment and merging of partial data. We also present the process of the scan model reconstruction through experiments.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.426-439
• /
• 2021

In this study, we compare the properties and estimate the durability of five oil colors that are the most popularly used colors in the conservation of oil paintings. A set of these colors was obtained form four manufacturers each, and their properties were analyzed by conducting deterioration experiments. Subsequently, we observed the colors and performed X-ray fluorescence analysis. As a result of colour observation and XRF analysis, it was confirmed that there are the differences according to the pigment types, mixing rations and the manufacturers even for colors having the same product name. The deterioration test indicated differences in the appearance of the colors ; for instance, the color difference was above 12.0 in most of the samples, including restoration color and acrylic gouache. In the case of Lemon Yellow a lot of discoloration and cracking occurred, and difference in gloss was ob served in Viridian of manufacturer C. Most cracks were ob served in the restoration color obtained from manufacturer B and were assumed to be because of the resin used by the manufacturer. Nevertheless, additional research will have to be conducted by controlling variables in order to find out the cause. Through this study, we demonstrated that retouching materials for conservation of oil painting differed in their physical properties according to the color and manufacturer. Therefore a conservator should be mindful during the selection and use of materials for retouching oil paintings.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.53-54
• /
• 2010

본 논문에서는 단일 채널 디지털 오디오 신호에서 스펙트로그램과 영상 처리 기법을 이용하여 크래클 잡음을 검출하는 알고리즘을 제안한다. 오디오 신호의 주파수 특성을 효율적으로 분석하기 위해 스펙트로그램을 특정 컬러맵을 이용하여 컬러 영상으로 변환한 후 영상 처리 기법을 적용하여 크래클 잡음이 존재하는 구간을 검출하여 디지털 오디오 복원에 이용한다. 특히 고전영화에 나타나는 크래클 잡음은 에너지와 신호 길이가 음성이나 음악 신호와 유사하여 기존의 스펙트럴 음성 검출 기법으로는 검출에 어려움이 있다. 이에 비해 스펙트로그램 영상에서는 크래클 잡음이 다른 신호들과 구분되는 특성을 나타내므로 영상 처리 기법을 적용하여 경계 검출과 Hough 변환에 의한 선 검출을 이용하여 크래클 잡음을 검출한다. 제안된 알고리즘은 고전 영화 디지털 오디오 복원에 적용하였으며 크래클 잡음 검출에 우수한 성능을 보여준다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2000.11b
• /
• pp.75-80
• /
• 2000

본 논문은 영상복원을 역확산 과정으로 해석하여 복원된 영상을 역확산 방정식의 해로 구하는 알고리즘을 제안한다. 역확산 과정은 물리적으로 불량위치(ill-posed)과정이기 때문에, 이를 정규화 해주어야 하는데 이를 위해서 역확산 과정을 고유함수(eigenfunction)들의 전개로 나타낸 후에 고유함수들의 계수들을 조작하였다. 본 논문에서는 계수들을 조작할 때 영상이 가지고 있는 주파수 특성을 고려하여 한계주파수(cut-off frequency)를 넘은 경우에 계수들을 시간과 주파수의 감소함수로 나타내어 불량위치문제를 해결하였다. 계수를 주파수에 대한 감소함수로 나타낸 것은 영상에 저주파 성분이 많고, 고주파 성분이 영상의 형성에 끼치는 영향이 상대적으로 적다는 영상의 특성을 고려한 것이다. 이러한 감소함수를 사용하였을 때 불량위치 문제를 해결할 수 있다는 것을 증명하였고, 실험적으로 양질의 영상을 산출함을 보였다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.04a
• /
• pp.57-61
• /
• 2001

일반적으로 Asphaltene은 원유뿐만 아니라 화석연로원(Fessil Fuel Sources)에도 포함되어 있는 것으로 알려져 있으며 난분해성으로 탄화수소(Hydrocarbon)와 Heterocyclic 또는 N-, S-, 산소를 포함하는 화합물이다. 그리고 금속성 물질이 Asphaltene Fraction에 농축되어 있는 것으로 알려져 있다. 한편 이러한 metallo-complex는 Asphaltene의 구조화합물중 방향족계 sheet 사이에 Self-association 상태로 존재한다. Asphaltene의 분해는 일반 TPH나 BTEX계 유류의 분해 기작과는 매우 상이하며 현재까지 Asphaltene으로 오염된 토양의 복원 기술을 매우 미미한 것으로 알려져 있다. 따라서 본 연구는 Asphalteme으로 오염된 토양의 복원 기숙을 개발하기 위한 전단계로 Asphaletene의 구성물질과 저분자화 작용기작을 구명하여 효과적 복원기술 개발을 위하여 Arabian Light Oil에서 Oil 자체와 Oil에서 분리해낸 Asphaltene을 사용하여 용매조건과 처리제별로 저분자화 과정을 조사하였다.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.4
• /
• pp.45-54
• /
• 1999

본 논문에서는 웨이브렛 변환 대역에서 영역분할 기법을 적용하여 얻어진 각 영역을 중요 영역과 비 중요 영역으로 분류하고 각각의 영역을 그의 특성에 적합한 방식으로 부호화 하는 기법을 제안하였다. 중요 영역은 전체 영역가운데 매우 작은 부분을 차지하지만 영상 복원에 매우 큰 영향을 주기 때문에 이러한 영역 부호화를 위해 기존의 EZW 방식보다 성능이 우수하며 단일계수 전송에 성능이 뛰어난 SPIHT 알고리즘을 적용하였다. 그러나 비 중요영역은 영상복원에 미치는 영향이 적을 뿐만 아니라, 매우 큰 동질 영역을 형성하기 때문에 텍스춰 모델링을 이용할 경우 높은 압축률을 얻을 수 있다. 또한 이 방식을 이용할 경우 인위적인 에러가 거의 없기 때문에 이용할 경우 높은 압축률을 얻을 수 있다. 또한 이 방식을 이용할 경우 인위적인 에러가 거의 없기 때문에 시각적으로도 좋은 영상을 복원 할 수 있다. 실험결과 제안한 시스템은 다양한 영상에 대하여 적응성이 있음을 보였고 특히 0.2bpp 이하의 매우 낮은 비트 율에서도 EZW 와 같은 기존의 웨이브렛 기반 부호화기보다 좋은 성능을 나타내었다.