• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.5
• /
• pp.567-577
• /
• 1998

When continuous and discontinuous microstrip is analyzed with FDTD(Finite Difference Time Domain) method, we used Berenger's 3D-PML as absorbing boundary condition, and IST(Inner Source Technique) was used for source excitation instead of front excitation that is existing method. In the case using IST, we have observed that analyzed characteristic is not affected by the reduced computational domain of the side and top face in which evanescent field and radiation field is exist. Also, if we control the position of the inner source, we could effectively reject the influence of the reflective wave by mean of imperfective boundary condition. In this paper, by using IST, we have calculated dispersive characteristic and characteristic impedance of the microstrip. And we have calculated magnitude and phase of the scattering coefficient, and obtained equivalent circuit of the open microstrip end.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.81-88
• /
• 2004

In case of mechanical down tilting, a horizontal pattern is distorted and beam width widens whenincreasing tilt angle, which causes an expansion of hand off region and burden base station equipment. In contrast, electrical down tilting has advantage that horizontal HPBW is kept constant with down tilting. In this paper, based on a phased array technology, dual polarized base station antenna with electrical down tilting was developed at 800MHz band. The antenna has down tilting range of 0$^{\circ}$ to 14$^{\circ}$, and 15㏈i gain. We use stacked microstrip patch as a radiated element and apply balanced feed technique to improve isolation between ports and discrimination of cross polarization. The effect of electrical down tilting was verified by field test.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1209-1215
• /
• 2014

The Uniform Geometrical Theory of Diffraction(UTD) is an effective technique to analyze the radio wave by ray-based calculation of the diffraction coefficient and the reflection coefficient. In this paper, user body shadowing based on the UTD is investigated when the user is close to the mobile device. Two cases are introduced. One is that the user is calling with the mobile attached to the ear(Head Model). The other is that the mobile is located about 15cm away from the user's chest(Chest Model) Radiation Model and Scattering Model are applied to these cases presenting which model is applicable.

• Korean Journal of Remote Sensing
• /
• v.26 no.1
• /
• pp.9-20
• /
• 2010

The LIDAR data can be efficiently utilized for automatic reconstruction of 3D models of objects on the terrain and the terrain itself. In this paper, we attempted to generate simulated waveforms of FW (Full-Waveform) LIDAR (LIght Detection And Ranging). We performed the geometric modeling of the sensor and objects, and the radiometric modeling of the waveform intensity. First, we compute the origins and directions of the sub-beams by considering the divergence effects of a laser beam. We then searched for the locations at which the sub-beams intersected with the objects, such as ground, buildings and trees. Finally, we generate the individual waveforms of the reflected sub-beams and the waveform of the entire beam by summing the individual ones. With the experimental results, we confirmed the waveforms were reasonably generated, showing the characteristics of the surfaces the beam interacted with.

• Korean Journal of Remote Sensing
• /
• v.19 no.6
• /
• pp.411-419
• /
• 2003

An area corresponding to the spatial resolution of optical remote sensor imagery often includes more than one pure surface material. In such case, a pixel value represents a mixture of spectral reflectance of several materials within it. This study attempts to apply the spectral mixture analysis on forest and to evaluate the information content of endmember fractions resulted from the spectral unmixing. Landsat-7 ETM+ image obtained over the study area in the Kwangneung Experimental Forest was initially geo-referenced and radiometrically corrected to reduce the atmospheric and topographic attenuations. Linear mixture model was applied to separate each pixel by the fraction of six endmember: deciduous, coniferous, soil, built-up, shadow, and rice/grass. The fractional values of six endmember could be used to separate forest cover in more detailed spatial scale. In addition, the soil fraction can be further used to extract the information related to the canopy closure. We also found that the shadow effect is more distinctive at coniferous stands.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.6
• /
• pp.522-527
• /
• 2019

In order to fabricate high-quality SiC substrates for power electronic devices, various single crystal growing methods were prepared. These include the physical vapor transport (PVT) and top seeded solution growth (TSSG) methods. All the suggested SiC growth methods generally use induction-heating furnaces. The temperature distribution in this system can be easily adjusted by changing the hot-zone design. Moreover, precise temperature control in the induction-heating furnace is favorably required to grow a high-quality crystal. Therefore, in this study, we analyzed the heat transfer in these furnaces to grow SiC crystals. As the growth temperature of SiC crystals is very high, we evaluated the effect of radiation heat transfer on the temperature distribution in induction-heating furnaces. Based on our simulation results, a heat transfer strategy that controls the radiation heat transfer was suggested to obtain the optimal temperature distribution in the PVT and TSSG methods.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.213-213
• /
• 2015

밭에서의 점적 관개를 이용한 노지 재배의 경우 적정 관개 계획 수립을 위해서는 작물 및 토양의 수분 정보에 대한 정확한 파악이 필요하다. 본 연구에서는 밭 토양을 GIS(Geographic Information System)를 통해 격자 형태로 분할하여 작물의 증발산량 및 토양의 수분함량을 모의할 수 있는 격자 기반 토양 물수지 모형을 개발하였다. 본 모형을 통해 작물의 소비수량 및 필요 수량을 파악함으로써 작부기간 중 필요한 관개수량을 제시하는 것이 가능하다. 고도화 기상자료로는 국가농림기상센터에서 운영 중인 고해상도 WRF(Weather Research and Forecasting) 모형에서 생산된 격자 형태의 복사, 온도, 바람, 강수 자료를 사용하였고 고도화 기상자료의 격자 해상도 별로 모의되는 작물 및 토양의 수분 정보 간 비교 및 분석을 실시하였다. 토양 물수지 모형에 입력되는 격자형태의 자료로는 기상, 토성 및 토지이용 자료가 있으며 기상자료의 경우 가로 및 세로의 크기가 각 270, 810, 2430m로 동일한 3가지 경우로 나누어 적용했으며 토성 및 토지이용 자료의 경우 기상 격자의 최소 크기에 맞춰 가로 및 세로의 크기가 각 270m인 격자로 분할하였다. 이와 같은 과정에 의한 모의 결과 각 격자별 작물 증발산량, 토양수분함량 및 관개수량의 일 연별 시계열 자료를 얻을 수 있으며 동시간대 격자별 수문인자 값을 산정하고 위치에 따른 공간적 상호 상관성을 분석하였다. 결과적으로, 고도화 기상자료의 격자 크기에 따른 밭 토양 물수지 분석 결과를 통해 고도화 기상 격자의 규모별 밭 토양 물수지 분석 효용성을 파악하고자 하였다. 더불어, 시험 지역(Test Bed) 선정을 통해 토양수분 및 증발산량을 실측하고 본 모형의 모의 결과와 비교함으로써 검정하는 것을 향후 연구 계획으로 한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.100-100
• /
• 2019

최근 대기 중 미세먼지의 농도가 높은 일수가 급증하면서, 미세먼지를 저감하고자 하는 연구가 활발히 이루어지고 있다. 미세먼지는 주로 자동차 혹은 공장 등 인간 활동에 의한 오염물질 배출에 의해 발생하는 것으로 알려져 있으며, 태양복사에너지, 토양수분, 강우, 풍속 등의 수문기상학적 인자에 의해 발생, 이동, 소멸의 과정을 거친다. 현재 우리나라에서는 미세먼지 농도를 관측하기 위해 지점 기반의 관측소를 운영하고 있으며, 관측소가 위치하지 않은 지역의 미세먼지 농도는 선형 보간법 등을 활용한 내삽 기법을 통해 제공하고 있다. 그러나 미세먼지 농도는 다양한 수문기상인자들의 영향에 의한 차이가 크게 나타나기 때문에 지점 기반의 자료로는 해당 지역의 미세먼지 농도를 추정하는 데 어려움이 많다. 본 연구에서는 미세먼지의 공간적인 분포를 추정하고자 MODerate resolution Imaging Spectroradiometer (MODIS) 에어로졸 자료와 Global Land Data Assimilation System (GLDAS) 수문기상인자를 활용하여 미세먼지 농도에 영향을 주는 것으로 판단되는 다양한 수문기상인자들과의 상관성을 분석하였다. 미세먼지와 각 인자간의 상관성을 분석하여 높은 상관성을 갖는 수문기상인자들을 도출하고 최적의 선형회귀분석 모델을 구축하기 위해 베이지안 모델 평균(Bayesian Model Averaging, BMA)을 사용하였으며, 지점 데이터와의 비교를 통해 활용성을 검증하였다. 전체적으로 수문기상인자를 사용한 선형회귀분석 결과에서는 미세먼지농도 변화의 경향을 반영하고 있는 것을 확인할 수 있었으나, 계절별, 지역별 등 대기 특성을 고려하지 않아 각 기간의 급격한 농도 변화를 감지하기에 어려움이 있었다. 이러한 연구를 바탕으로 수문기상인자와 미세먼지 농도의 패턴이 더욱 정확히 분석된다면, 미세먼지 농도 모니터링과 정확한 예보 시스템의 구축에 효과적으로 활용 될 것으로 기대된다.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.11-19
• /
• 2021

Contrails are line-shaped clouds formed by the condensation of water vapor from the interaction of exhaust gas from aircraft engines and the high-altitude atmosphere. Contrails are known to aggravate global warming by creating a greenhouse effect by absorbing or reflecting radiation emitted from the Earth. In this study, development of a model that can quantitatively predict the contrail occurrence was conducted for the reduction of contrail, which is likely to form an aircraft certification category in the future. Based on prior research results, a model that can predict the occurrence of contrail between Tokyo and Qingdao was developed, in addition to proposing improved flight altitude that can minimize the occurrence of contrail.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.1-14
• /
• 2019

Since most documents used in web, XML, office applications are tree-structured, diff, merge, and version control for tree-structured documents in multi-user environments are crucial tasks. However research on edit scripts which is a basis for them is in primitive stage. In this paper, we present a document model for understanding the change of tree-structured documents as edit scripts are executed, and propose a method of switching adjacent edit operations on tree-structured documents based on the analysis of the effects of edit operations. Mostly, edit scripts which are produced as the results of diff on tree-structured documents only consist of basic operations such as update, insert, delete. However, when move and copy are included in edit scripts, because of the characteristics of their complex operation, it is often that edit scripts are generated to execute in two passes. In this paper, using the proposed method of switching edit operations, we present an algorithm of transforming the edit scripts of X-treeESgen, which are designed to execute in two passes, into the ones that can be executed in one pass.