• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.32.4-33
• /
• 2016

활동성은하핵(AGN)의 거대 블랙홀 주변에 존재하는 플라스마 디스크의 구조나 물리적인 상태를 관측으로 직접 찾는 것은 AGN 중심부분에서의 제트 형성, 방출과정이나 에너지 수송과정을 조사하기 위해 중요한다. 지금껏 주로 센치미터파장 영역의 다주파 VLBI 관측으로 우리은하에서 가까운 AGN 속에 존재하는 10 pc 정도의 플라스마 디스크가 발견되어 있다만, AGN의 활동성을 정하고 있는 1 pc 이하의 스케일에서의 디스크 구조를 직접 관측한 결과는 아직 없다. 우리는 2015년8월부터 KVN 및 KVN과 일본 VERA로 구성되는 한일공동 VLBI 관측망(KaVA)을 이용해서 전파 은하 3C 84(z = 0.0176, 1 mas = 0.36 pc)의 밀리미터파장 모니터링을 진행하고 있다. KVN과 KaVA를 이용하면 1 pc 이하의 스케일로 3C 84의 중심구조를 고감도에서 분해할 수 있다. 이번 발표에서는 KVN 및 KaVA로 거의 동시에 실시한 관측결과를 중심으로 보고한다. 관측은 2016년2월22일(KaVA 43 GHz) 및 23일(KVN 86 GHz)에 실시되었다. 양 주파수의 이미지에서 종래의 센치미터 ~ 밀리미터파장 VLBI관측으로도 검출되어 있는 중심핵(C1) 및 남쪽에 약 3 mas 떨어져서 위치하는 로브(C3) 성분 뿐만 아니라 C1으로부터 북쪽에 약 2.5 mas 떨어져서 위치하는 새로운 성분(N1)을 검출하였다. N1의 검출 수준은 43, 86 GHz 모두 $6{\sigma}$이며, 양 주파수 사이에서 광학적으로 두꺼운 스펙트럼을 가지고 있다. 과거의 관측으로 측정된 C3의 겉보기 속도는 빛의 속도의 약 23%이며, 남북 로브의 구조와 운동의 대칭을 가정하면 N1이 도플러 분사출 효과 때문에 어두워지고 있는 가능성은 낮다. 따라서 C3에 대응하는 북쪽 N1로브로부터의 복사가 블랙홀 주변의 플라스마 디스크로 인해 저주파수에서 강한 흡수를 받고 있는 결과고 생각된다.

• Journal of Korea Game Society
• /
• v.9 no.5
• /
• pp.137-144
• /
• 2009

This paper predicts 6 facial regions that may have sharply different scattering properties, rendering the face more realistically based on their diffusion profiles. The scattering properties are acquired in the form of high dynamic range by photographing the pattern formed around an unit ray incident on facial skin. The acquired data are fitted to a 'linear combination of Gaussian functions', which well approximates the original diffusion profile of skin and has good characteristics as the filter. During the process, to prevent its solutions from converging into local minima, we take advantage of the genetic algorithm to set up the initial value. Each Gaussian term is applied to the irradiance map as a filter, expressing subsurface scattering effect. In this paper, to efficiently handle the maximum 12 Gaussian filterings, we make use of the parallel capacity of CUDA.

• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.365-372
• /
• 2012

This paper aims to evaluate the effects that presence, installation number and capacity of ventilation vent and presence of multiple fire sources have on the behaviour of smoke temperature induced by vehicle fire in road tunnel. Six types of scenarios were assumed and FDS was ran to simulate them. As the number of ventilation vents increases, the smoke temperature are calculated to be reduced, but it is shown that effects exerted by two ventilation vents are almost similar to ones by three ventilation vents. Capacity of ventilation vent has a greater impact on the reduction of smoke temperature than installation number of ventilation vents. Smoke temperatures computed for all scenarios except for scenario No. 1 (without ventilation vent) and scenario No. 6 (with multiple fire sources) above fire source are analyzed to be under $400^{\circ}C$ and it means that the radiation of smoke layer above fire source doesn't induce the ignition of materials around fire source.

• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.865-874
• /
• 2005

The information stored in the computer system needs to be protected from unauthorized access, malicious destruction or alteration and accidental inconsistency. In this paper, we propose an intrusion detection system based on sensor concept for defecting and preventing malicious attacks We use software sensor objects which consist of sensor file for each important directory and sensor data for each secret file. Every sensor object is a sort of trap against the attack and it's touch tan be considered as an intrusion. The proposed system is a new challenge of setting up traps against most interception threats that try to copy or read illicitly programs or data. We have implemented the proposed system on the Linux operating system using loadable kernel module technique. The proposed system combines host~based detection approach and network-based one to achieve reasonably complete coverage, which makes it possible to detect unknown interception threats.

• Fire Science and Engineering
• /
• v.26 no.3
• /
• pp.8-13
• /
• 2012

This study suggests the water curtain nozzles as the way to protect important wooden cultural properties from an adjacent building fire or a forest fire. They are designed to block off the pyrolysis of timbers which occurs at $200{\sim}250^{\circ}C$ by forming a water curtain with the flow of water that spouts over a certain pressure from the bottom. The existing water curtain nozzles installed at the following sites were examined: NakSan-sa (Temple) in Gangwon-do (Province) and in Muwisa (Temple) in Jeollanam-do (South Province). As a way to improve and complement the system, this study designed nozzles with covers in order not to disrupt the landscape. Connected pipes are elevated and jet water when they are in use. Possible ways to install the connected elevating pipes to jet water effectively were investigated.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.2
• /
• pp.157-164
• /
• 2012

The design strategy of the multi-functional structure is that the electrical components and the circuits are directly put on their supporting structural panel in which the radiation shields and the thermal control functions are integrated. Applying the multi-functional structure reduces the total mass and size of the space system and makes it possible to lower launch cost. In present study the performance of thermal radiation for six types of multi-functional structure are investigated by the numerical method. The effect of the rib configuration on heat transfer for the multi-functional-structure is not important alone but is meaningful considering with the structural stiffness, difficulty of manufacturing and mass increase. In heat spreading point of view, the thickness of the outer conductive layer is important rather than the rib configuration and the trade-off study with the mass and thickness is required for optimum design.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.1011-1030
• /
• 2019

Remote sensing sensors used in satellites or aircrafts measure electromagnetic waves passing through the earth's atmosphere, and thus the information on the surface of the earth is affected as it is absorbed or scattered by the earth's atmosphere. Although satellites have different wavelength ranges and resolutions depending on the purpose of onboard sensors, in general, atmospheric correction must be made to remove the influence of the atmosphere in order to accurately measure the spectral signal of an object on the earth's surface. The purpose of atmospheric correction is to remove the atmospheric effect from remote sensing images to determine surface reflectivity values and to derive physical parameters of the surface. Until recently, atmospheric correction algorithms have evolved from image-based empirical methods or indirect methods using in-situ observation data to direct methods that numerically interpret more complex radiative transfer processes. This study analyzes the research records of atmospheric correction algorithms developed over the past 40 years, systematically establishes the current state of atmospheric correction technology and the results of major atmospheric correction algorithms and presents the current status and research trends of related technologies.

• Membrane Journal
• /
• v.25 no.3
• /
• pp.287-294
• /
• 2015

Photovoltaic (PV) modules are environmentally friendly energy-conversion devices to generate electricity via the photovoltaic effect of semiconductors on solar energy. One of key elements in PV modules is "Backsheet," a multi-layered film to protect the devices from a variety of chemicals including water vapor. A representative Backsheet is composed of polyvinyl fluoride (PVF) and poly(ethylene terephthalate) (PET). PVF is relatively expensive, while showing excellent resistance to chemical attacks. Thus, it is necessary to develop alternatives which can lower its high production cost and guarantee lifetime applicable to practical PV modules at the same time. In this study, PET films with certain levels of crystallinity were utilized instead of PVF. Since it is well known that PET is suffering from trans-esterification and hydrolysis under a wide pH range, it is needed to understand decomposition behavior of the PET films under PV operation conditions. To evaluate their chemical decomposition behavior within a short period of times, accelerated decomposition test protocol is developed. Moreover, electrochemical long-term performances of the PV module employing the PET-based Backsheet are investigated to prove the efficacy of the proposed concept.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.5
• /
• pp.474-480
• /
• 2011

Space Imaging Sensor operated on LEO is affected from the Earth IR and Albedo as well as the Sun Radiation. The Imaging Sensor exposed to extreme environment needs thermal control subsystem to be maintained in operating/non-operating allowable temperature. Generally, units are periodically dissipated on spacecraft panel, which is designed as radiator. Because thermal design of the imaging sensor inside a spacecraft is isolated, heat pipes connected to radiators on the panel efficiently transfer dissipation of the units. First of all, preliminary thermal design of radiating area and heater power is performed through steady energy balance equation. Based on preliminary thermal design, on-orbit thermal analysis is calculated by SINDA, so calculation for thermal design could be easy and rapid. Radiators are designed to rib-type in order to maintain radiating performance and reduce mass. After on-orbit thermal analysis, thermal requirements for Space Imaging Sensor are verified.

• Journal of the Korean earth science society
• /
• v.24 no.4
• /
• pp.325-336
• /
• 2003

The onset time of sea breeze at Haeundae is faster than that at Suyoung in spite of the observation site at Suyoung being 5m and that of Haeundae being 1 km away from the coastline. We therefore simulate the effects of terrain on the onset time of sea breeze at Suyoung and Haeundae districts by using the LCM(Local Circulation Model). This phenomenon is due to the nighttime density flow, which is created by nighttime radiative cooling. It follows the slope of the highlands surrounding the urban area, gathers at a central area of Busan, and then flows out to a lower area like Suyoung river. This process continues after sunrise. In researching the AWS wind speed, we find an important thing. That is to say, the nighttime mean wind speed at Suyoung is three times greater than that at Haeundae. This property shows that Suyoung is an outflow channel of nighttime air mass. The above observed data shows that terrain effect has a important role on the onset of sea breeze.