• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.10a
• /
• pp.179-184
• /
• 1995

본 논문은 단면관성 효과와 전단효과를 고려한 회전하는 두껍고 짧은 외팔보의 진동해석모델링을 제시하였으며 수치해석을 통해 다음과 같은 결론을 얻었다. 세장비가 큰 경우(.alpha.는 70 이상) Timoshenko 해석모델과 Euler 해석모델에 의한 고유진동수 예측은 거의 차이가 없다. 그러나 세장비가 작은 경우 Euler 해석모델은 Timoshenko 해석모델에 비해 큰 무차원 고유진동수 값을 예측하며 특히 고차모드에서 두 모델은 큰 해석결과의 차이를 보여주었다. 따라서 보의 세장비가 작은 경우, 보가 회전할 때도 일반적 해석경우와 마찬가지로 Timoshenko 해석모델을 사용해야 된다는 자연스러운 결론을 얻을 수 있었다.

• Computational Structural Engineering
• /
• v.8 no.1
• /
• pp.95-106
• /
• 1995

Noise and vibration induced by subway operation are one of the major factor that annoy residents living near the subway tracks. In general, lateral vibration is the major concern when we are considering vibration of a building. However, the vertical vibration is the major concern in considering the vibration induced by the subway operation. Analysis model for the vertical vibration of the structure should consider the effect of beam vibration. Thus, the same model used for the lateral vibration analysis can not be used for an analysis of vertical vibration of the structure. Appropriate analysis model which can consider the inertia force of the beam is necessary when analyzing a structure for the vertical vibration. Modeling technique for the vertical vibration analysis of structures has been studied on this paper. It is recommended to use one or more elements for columns and to use two or more elements for beams when analyzing structures for vertical vibration induced by subway operation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.288-289
• /
• 2011

압전 효과에 기초한 셀룰로오스 압전 종이의 진동센서 응용 가능성을 알아보았다. EAPap (Electroactive paper)은 재생과정과 테입 캐스팅을 이용해 만들었으며, 얇은 적층 필름을 이용해 코팅하였다. EAPap 샘플을 알루미늄 외팔보에 부착하여 진동 실험을 수행하였다. EAPap 센서의 출력을 비교하기 위해 가속도계를 이용하여 보의 응답 특성을 동시에 측정하였으며, 유한요소법을 이용해 보의 동특성을 구하여 비교하였다. EAPap 센서는 주위 환경 노이즈의 영향을 많이 받았는데, 접지와 절연을 통해 이러한 노이즈의 영향을 많이 감소시킬 수 있었으며, 실험결과로부터 EAPap의 진동센서 응용 가능성을 확인하였다.

• Composites Research
• /
• v.14 no.3
• /
• pp.1-9
• /
• 2001

A new non-destructive fatigue prediction model of the composite laminates is developed. The natural frequencies of fatigue-damaged laminates under extensional loading are related to the fatigue life of the laminates by establishing the equivalent flexural stiffness reduction as a function of the elastic properties of sublaminates. The flexural stiffness is derived by relating the 90-ply elastic modulus reduction, and using the laminate plate theory to the degraded elastic modulus and the intact elastic modulus of other laminates. The natural frequency reduction model, in which the dominant fatigue mode can be identified from the sensitivity scale factors of sublaminate elastic properties, provides natural frequency vs. fatigue cycle curves for the composite laminates. Vibration tests were also conducted on $[{90}_2/0_2]_s$ carbon/epoxy laminates to verify the natural frequency reduction model. Correlations between the predictions of the model and experimental results are good.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.88-93
• /
• 1994

본 연구에서는 배기계의 진동해석과 관련하여, 배기계 파이프에 대한 보 모델링기법을 제안하였다. 굴곡부가 통상의 직석보로 모델링될 때는 실제보다 고유진동수가 상당히 높게 평가되므로, 이 굴곡부의 강성을 적절히 수정해 주어야만 한다. 따라서 본 논문에서는 정적 변형에너지개념을 이용하여 실제 엔지니어들이 사용할 수 있을 정도로 간단하면서도, 합리적인 기법을 제시하였다. 실제 배기계의 중앙파이프의 진동해석에 적용해 본 결과 이 기법의 타당성과 효율성을 입증할 수 있었다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.154-157
• /
• 1994

보는 토목, 건축, 기계, 선박, 항공 등 구조공학 분야에서 가장 기본이 되는 구조단위이므로 그에 대한 동적해석 특히 자유진동에 관한 많은 연구들이 발표되고 있다. 이제까지 이러한 연구들은 사항중으로 인한 정적 초기처짐의 영향을 고려하지 않은 논문들이다. 최근 재료과학의 발달로 고강도의 재료가 출현하고 따라서 세장비가 매우 큰 구조물의 시공이 가능하게 되어 정적 처짐이 다소 큰 구조물에서도 정적 안전성을 확보할 수 있게 되었다. 그러나 이러한 경우에 정적 초기처짐은 구조물의 동적거동에 영향을 줄 것으로 생각된다. 본 연구는 문헌[7]에서 유도된 편미분방정식을 이용하여 사하중에 의한 정적 초기처짐을 갖는 보의 자유진동을 지배하는 상미분방정식을 유도하고 이를 수치해석하여 고유진동수와 진동형을 산출하는데 연구목적이 있다.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.206-213
• /
• 1999

In the beam-like ship vibration analysis. three-dimensional correction factor(J-factor) can be calculated by considering the three-dimensional effect of the two-dimensional added mass. However, existing method is time-consuming with low accuracy in respect of global vibration analyses for vessels with large breadth. In this paper, to improve the demerit of the previous method, a new method of the beam-like ship vibration analysis is introduced In this method. the three-dimensional fluid added mass of surrounding water is calculated directly by solving the velocity potential problem using the Boundary Element Method (BEM). Then the three-dimensional added mass is evaluated as the lumped mass for each strip. Also, the beam-like ship vibration analysis for the structural beam model if performed with the lumped mass considered. It was verified that this new method is useful for the beam-like ship vibration analysis by comparing results obtained from both the existing method and the new method with experimental measurements for the open top container model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.13 no.4
• /
• pp.251-258
• /
• 1993

The main purpose of this paper is to present both the natural frequencies and the buckling loads of beam-columns on Winkler-type foundations. The ordinary differential equations governing the free vibrations and the buckling loads of beam-columns on Winkler-type foundation are derived as nondimensional forms. The Runge-Kutta method and Determinant Search method are used to perform the integration of the differential equations and to determine the eigenvalues(natural frequencies and buckling loads), respectively. Hinged-hinged and damped-clamped end constraints are applied in numerical examples. The relation between frequency parameter and elastic foundation parameter is presented in figure. The effects of axial loads on the natural frequencies of beam-columns on elastic foundations are investigated and the relation between buckling load parameter and elastic foundation parameter is also analyzed. The relation between foundation rested ratio and frequency parameter, buckling load parameter are investigated. The beam-columns on non-homogeneous elastic foundation are analyzed and typical mode shapes are also presented.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1075-1082
• /
• 2000

The paper describes the vibration and stability of tapered beams on two-parameter elastic foundations. The two-parameter elastic foundations are constructed by distributed Winkler springs and a shearing layer as of ten used in soil models. The shear deformation and the rotatory inertia of a beam are taken into account. Governing equations are derived from energy expressions using Hamilton\`s principle. The associated eigenvalue problems are solved to obtain the free vibration frequencies or the buckling loads. Numerical results for the vibration of a beam with an axial force are presented and compared when other solutions are available. Vibration frequencies, mode shapes, and critical forces of a tapered Timoshenko beam on elastic foundations under an axial force are investigated for various thickness ratios, shear foundation parameters, Winkler foundation parameters and boundary conditions.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.523-534
• /
• 2002

Free vibration and buckling analysis of multi-delaminated composite beam-columns subjected to axial compressive load is performed in the present study In order to investigate the effects of multi-delaminations on the natural frequency and the elastic buckling load of multi-delaminated beam-columns, the general kinematic continuity conditions are derived from the assumption of constant slope and curvature at the multi-dclamination tip. The characteristic equation of multi-delaminated beam-column is obtained by dividing the global multi-delauunated beam-columns into segments and by imposing recurrence relation from the continuity conditions on each sub-beam-column. The natural frequency and the elastic buck)ing load of multi-delaminated beam-columns according to the incremental load of axial compression, which is limited to the maximum elastic buckling load of sound laminated beam-column, are obtained. It is found that the sizes, locations and numbers of multi-delaminations have significant effect on natural frequency and elastic buckling load, especially the latter ones.