• Journal of Oral Medicine and Pain
• /
• v.33 no.1
• /
• pp.15-26
• /
• 2008

Purpose : To investigate the actual conditions of diagnosis and treatment of oral medicine inpatient with systemic disease. Methods : A total of 110 subjects, inpatient due to systemic disease for diagnosis and treatment of oral disease was requested to answer the medical history and dental treatment record. Results : Systemic disease is composed of Non-insulin-dependent diabetes mellitus 26%, Cerebral infarction 25.2%, Intracerebral hemorrhage, Polyarthrosis, Coxarthrosis 4.7%, Nerve root and plexus disorders, Hypertensive heart and renal diseases, Ankylosing spondylitis 2.4%. Chief complain of oral disease is composed of toothache 28.6%, routine check 23%, tooth mobility 8.7%, hypersensitivity 7.1%, periodontal bleeding 6.4%. Oral disease is composed of Gingivitis and periodontal diseases 28.9%, Dental caries 17.1%, Diseases of pulp and periapical tissues 15.1%, Diseases of salivary glands 10.5%, Other diseases of hard tissues of teeth 8.6%, Within Normal Limit 5.3%. Treatment of oral disease is composed of periodontal treatment 17.95%, rejection of treatment 16.67%, medication for halitosis & dry mouth 13.46%, extraction 12.18%, prosthetic treatment 8.97%. Chief complain in oral medicine is composed of oral soft tissue problem 6.4%, craniomandibular disorders 5.6%, halitosis 4%, total 16%. Conclusion : These findings indicate that inpatient due to the systemic disease is significantly correlated to the oral disease. The patients of oral disease interrelationship between inpatient and outpatient of systemic disease should be validated by future research.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.292-298
• /
• 2007

In order to thoroughly understand change patterns and to set up an appropriate approach the direction of future treatment towards children in Chonbuk area, we carried out this research. we could draw below conclusions from the studies based on researches of distribution of new patients visited Dept. of Pediatric Dentistry, Chonbuk Nat' university from 1998 to 2005 and current changes in dental treatment. 1. There was an increase in the number of patients until 2004 but it decreased in 2005. Boys took higher portion. 2. Number of patients increased during school holidays. 3. 97.7% of patients were urbanites. 4. An age group from 31 months to 6 years showing 48.2% was the highest, each percentage of $7{\sim}13$ years, $13{\sim}30$ months showed 31.3%, 17.2%. 5. 33.8% of patients were referred from local dental clinics and among them, an age group from 31 months to 6 years showing 49.5% was the highest, each percentage of $7{\sim}13$ years, $13{\sim}30$ months showed 35.2%, 12.9%. 6, 5.5% of patients who had systemic diseases, among them, each percentage of cardiovascular disease, mental retardation, respiratory disease showed 21.8%, 13.6%, and 11.0%. 7. According to the distribution of chief complaints, dental caries showing 42.9% was the highest. 8. Root canal treatment, restoration, prosthesis showing 42.6% were the highest of all treatments.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.151-161
• /
• 2007

To obtain the information of dental arch size and the distance from one tooth center to adjacent tooth center of occlusal surface of each tooth which is perforated by Pindex system on working cast for removable die system, 600 dental casts in Busan were examined. The distance of center of occlusal surface of each tooth and dental arch size were digitized. The results were as follows; 1. Mean values of the distance from center of maxillary central incisor to maxillary lateral incisor(tooth number 11$\sim$12, 21$\sim$22) is 5,7 mm, 12$\sim$13(22$\sim$23) is 5.9 mm, 13$\sim$14(23$\sim$24) is 6.9 mm, 14$\sim$15(24$\sim$25) is 7.1 mm, 15$\sim$16(25$\sim$26) is 8.4 mm, 16$\sim$17(26$\sim$27) is 10.2 mm, 11$\sim$21 is 7.30 mm. Mean values of the distance from center of mandibular central incisor to mandibular lateral incisor(tooth number 31$\sim$32, 41$\sim$42) is 4.5 mm, 32$\sim$33(42$\sim$43) is 4.8 mm, 33$\sim$34(43$\sim$44) is 6.3 mm, 34$\sim$35(44$\sim$45) is 7.2 mm, 35$\sim$36(45$\sim$46) is 9.2 mm, 36$\sim$37(46$\sim$47) is 10.7 mm, 31$\sim$41 is 4.7 mm. 2. Mean values of the distance from the center of maxillary right central incisor to the center of maxillary left central incisor(11$\sim$21) is 7.3 mm, 12$\sim$22 is 18.2 mm, 13$\sim$23 is 26.9 mm, 14$\sim$24 is 37.2 mm, 15$\sim$25 is 43.2 mm, 16$\sim$26 is 48.5 mm, 17$\sim$27 is 53.5 mm. Mean values of the distance from the center of mandibular right central incisor to the center of mandibular left central incisor(31$\sim$41) is 4.7 mm, 32$\sim$42 is 13.3 mm, 33$\sim$43 is 21.7 mm, 34$\sim$44 is 31.9 mm, 35$\sim$45 is 38.2 mm, 36$\sim$46 is 44.8 mm, 37$\sim$47 is 50.7 mm. 3. Mean values of the distance from the line of between 11$\sim$21 to 12$\sim$22 is 10.9 mm, 12$\sim$22 to 13$\sim$23 is 8.7 mm, 13$\sim$23 to 14$\sim$24 is 10.3 mm, 14$\sim$24 to 15$\sim$25 is 6.0 mm, 15$\sim$25 to 16$\sim$26 is 5.3 mm, 16$\sim$26 to 17$\sim$27 is 5.0 mm. 31$\sim$41 to 32$\sim$42 is 8.6 mm, 32$\sim$42 to 33$\sim$43 is 8.4 mm, 33$\sim$43 to 34$\sim$44 is 10.2 mm, 34$\sim$44 to 35$\sim$45 is 6.3 mm, 35$\sim$45 to 36$\sim$46 is 6.6 mm, 36$\sim$46 to 37$\sim$47 is 5.9 mm. 4. We checked the bottom side of cast to verify the position of dowel pin. There is no difference upper side and lower side.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.274-282
• /
• 2000

Stainless steel crowns are widely used for restoration for primary molars. The material used for the crowns is an alloy of $70\sim80%$ nickel and $5\sim15%$ chromium. Nickel has been known to cause allergic reaction, cancer and cell toxicity. Little is known about nickel with respect to the relationship between Ni-contained SS crown and graining of Ni-resistance in oral microorganisms. The purpose of this study is to examine whether use of Ni-contained SS crown leads to occurrence of Ni-resistant microorganism, especially enterococci. The gingival crevicular fluid of two different groups was taken. Experimental group included patients wearing SS crown, and control group comprised individuals without SS crown. The samples were plated in BHI agar, BHI agar supplemented with nickel chloride at the concentration of 3mM and bile esculin azide (BEA) agar. The cultured enterococci on BEA agar medium were tested their Ni-resistance in nickel-containing media increasing concentrations from 3mM to 50mM. The results were as follows: 1. In experimental group, a total of 507,350 strains were isolated on BHI agar, of which 53,864(10.62%) strains were found to be resistant to 3mM nickel. In control group, of 414,590 isolates on BHI agar, 37,523 isolates were resistant to 3mM nickel. 2. A total of 95 enterococci were isolated on BEA agar in experimental group, while 20 were isolated in control group. of the enterococci, 68 and 12 isolates were found to be nickel-resistant in experimental and control group, respectively. 3. Of 68 nickel-resistant isolates in experimental group, one survived 50mM nickel. In contrast, none of the isolates in control group was observed to grow at the concentrations over 30mM nickel.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.291-297
• /
• 2003

While making diagnosis and the treatment plan for the growing children who visited at Chonnam National University Hospital for orthodontic treatment, authors obtained 8 lateral cephalometric measurements in antero-posterior and vertical relationship such as APDI, WITS, ANB, SN-MP, ODI, PFH/AFH, Y-axis, SUM for children aged 7 to 9 with class III malocclusion and compared them with these of 73 children of elementary school aged 7 to 9 with proper profile and normal occlusion in Gwangju. The results were as follows: 1. Between normal occlusion and class III malocclusion, ANB, SN-MP, ODI, SUM, except PFH/AFH and Y-axis showed statistically significant differences(p<0.05). 2. Between mesurements to describe skeletal disorder of antero-posterior relationship such as APDI, WITS, ANB and skeletal disorder of vertical relationship such as SN-MP, ODI, PFH/AFH, Y-axis, SUM, all of them in both normal occlusion and Class III malocclusion showed significant correlation, except Y-axis, SUM correlation(p<0.01). 3. Wald' statistics of WITS, ANB and APDI expressing skeletal disorder of antero-posterior relationship showed 7.118, 5.148, 0.741, respectively and Wald' statistics of ODI, Y-axis, PFH/AFH, SN-MP, SUM were presented 28.348, 2.238, 1.376, 0.090, 0.089, respectively. Therefore, WITS and ODI could be considered as useful diagnotic measurements for class III malocclusion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.625-630
• /
• 2009

Root resorption of primary teeth usually occurs as the succeeding permanent teeth erupt, which induces differentiation of the hemopoietic cells into osteoclasts. Their root resorption pattern reflects the eruption path of the succeeding permanent teeth, and eventually the primary teeth shed as their succeeding permanent teeth erupt. Even when a permanent tooth germ is congenitally missing, root resorption of the corresponding primary tooth may still occur due to various factors, such as inflammation, traumatic occlusal force, and weakness of periodontium etc. Such congenital missing of permanent teeth is a commonly observed phenomenon in human be ing, and it often accompanies delayed retention of primary teeth. The etiologic factors for congenital missing in elude not only systemic diseases, but also local factors and human evolution process. In the radiographs of the cases in this report, the primary teeth without succeeding permanent teeth show pathologic root resorption. Root resorption progressed about 1/2~3/4 of the roots, and the surfaces of the resorption area were irregular. Considering high susceptibility of the periodontal ligament of primary teeth to root resorption, pathologic root resorption of primary teeth with delayed retention can be explained by the increased masticatory muscle force and abnormal occlusion developed during the mixed dentition. When the primary teeth without succeeding permanent teeth are lost, decision for space maintenance is required and long-term treatment plan for further prosthetic or orthodontic treatment should be establsihed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.375-390
• /
• 2009

Statement of problem: Implant supported overdenture is accepted widely as a way to restore edentulous ridge providing better retention and support of dentures. Various types of attachment for overdenture have been developed. Purpose: The purpose of this study was to investigate the influence of attachment type in implant overdentures on the biomechanical stress distribution in the surrounding bone, prosthesis and interface between implant and bone. Material and methods: Finite element analysis method was used. Average CT image of mandibular body(Digital $Korea^{(R)}$, KISTI, Korea) was used to produce a mandibular model. Overdentures were placed instead of mandibular teeth and 2mm of mucosa was inserted between the overdenture and mandible. Two implants($USII^{(R)}$, Osstem, Korea) were placed at both cuspid area and 4 types of overdenture were fabricated ; ball and socket, Locator, magnet and bar type. Load was applied on the from second premolar to second molar tooth area. 6 times of finite element analyses were performed according to the direction of the force $90^{\circ}$, $45^{\circ}$, $0^{\circ}$ and unilateral or bilateral force applied. The stress at interface between implants and bone, and prosthesis and the bone around implants ware compared using von Mises stress. The results were explained with color coded graphs based on the equivalent stress to distinguish the force distribution pattern and the site of maximum stress concentration. Results: Unilateral loading showed that connection area between implant fixture and bar generated maximum stress in bar type overdentures. Bar type produced 100 Mpa which means the most among 4 types of attachments. Bilateral loading, however, showed that bar type was more stable than other implants(magnet, ball and socket). 26 Mpa of bar type was about a half of other types on overdenture under $90^{\circ}$ bilateral loading. Conclusions: In any directions of stress, bar type was proved to be the most vulnerable type in both implants and overdentures. Interface stress did not show any significant difference in stress distribution pattern.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.403-415
• /
• 2009

The purpose of the study is to establish the effect of different abutment shapes and types of cements on the retention of the full veneer casted gold crowns. Metal dies that has the similar shape with the implant abutment were manufactured using a short(5mm) and long(10mm) dies with different convergence angles. Metal dies and gold crowns, which were made from the metal dies, were cemented with Temp-bond, Temp-bond mixed with petroleum jelly, ZPC and Premier implant cement. After that, these were tested for tensile force at the point of separation. The effect of convergence angle changes of different cement types on the retention was studied as well as the effects of the cement type changes with different convergence angles on the retention. In addition, study about the marginal gap of Premier implant cement used for this experiment was conducted. The results are as followed under the in-vitro experimental limits; 1. The retention of the Temp-bond mixed with petroleum jelly decreased as the convergence angle increased, and the retention was weakest among the cements. 2. The retention of ZPC decreased as convergence angle increased. When convergence angle was 5 degrees, ZPC showed stronger retention than Premier implant cement. 3. Premier implant cement had the weakest retention when the convergence angle was 5 degrees but when the convergence angle was 10 degrees, it had the strongest retention. As the angle increased more than 10 degrees, the retention decreased. 4. Premier implant cement showed bigger marginal gap when the convergence angle was 5 degrees than 10 degrees under the experimental condition.

• Journal of Oral Medicine and Pain
• /
• v.33 no.4
• /
• pp.375-382
• /
• 2008

This study was a preliminary study to establish diagnostic criterias and treatment for Orofacial Movement Disorders. The 33 Orofacial Movement Disorder patients who were visited in the department of Oral Medicine from September, 2007 to December, 2007 were selected for this study. We analyzed the age, sex, systemic diseases, the diagnosis and the cause of the patients' chief complaints, the self-consciousness and the types of orofacial movements. The obtained results were as follows : 1. Female were predominant in orofacial movement disorders(81.82% vs 18.18%) and mean age was 78.78(56 to 87) years. 2. They almost had systemic diseases(81.82%). Hypertenstion was the most common disease(22.41%) and diabetes mellitus(17.24%), depression(8.62%), gastritis(8.62%) in turns. 3. In clinical manifestation, temporomandibular disorder was the most frequently complained symptom(33.33%), and soft tissue disease(21.57%), burning mouth syndrome(17.65%), orofacial movement itself(15.69%), diffuse orofacial pain(6명, 11.76%) in turns. 4. Most orofacial movement disorders are idiopathic(72.73%), and related to prosthetic treatment(24.24%), related to antidepressant medication(3.03%) in turns. 5. The jaw-closing type was the most common type of orofacial movement disorders, and lateral type(33.33%), jaw-opening types(16.67%) in turns. 6. There were more patients who did not conscious of their orofacial movements than those who did.(54.55% vs 45.45%). In conclusion, dentists must be consider the orofacial movement disorders in patients who have orofacial pain. Also, dentists should obtain a proper history and perform a clinical examination to avoid misdiagnosis and inappropriate, irreversible treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.140-149
• /
• 2007

Cleft lip and palate are congenital craniofacial malformation. Reconstruction of dental arch in patient with alveolo-palatal clefts is very important, because they have many problems in functions and esthetics. Malnutrition, poor oral hygiene, respiratory infections, speech malfunctions, maxillofacial deformity, and psychological problems may be occured without proper treatment during the long period of management of the cleft lip and palate. So the treatment should be managed with a multidisciplinary approach. Bone grafting is a consequential step in the dental rehabilitation of the cleft lip and palate patient A complete alveolar arch should be achieyed of the teeth to erupt in and to form a stable dentition. And the presence of the cleft complicate the orthodontic treatment. Therefore bone grafting in patients with cleft lip and palate is a widely adopted surgical procedure. Grafted bone stabilizes the alveolar process and allows the canine or incisor to move into the graft site. After the bone grafting, orthodontic closure of the maxillary arch has become a common practice for achieving dental reconstruction without any prosthodontic treatment. Various grafting materials have been used in alveolar clefts. Iliac bone is most widely fovoured, but tibia, rib, cranial bone, mandible have also been used. And according to its time of occurrence, the bone graft may be divided into primary, early secondary, secondary, late secondary. Bone grafting is called secondary when performed later, at the end of the mixed dentition. It is the most accepted procedure and has become part of treatment of protocol A secondary bone graft is performed preferably before the eruption of the permanent canine in order to provide adequate periodontal support for the eruption and preservation of the teeth adjacent to the cleft. In this report, we report here on a patient with unilateral cleft lip and palate, who underwent iliac bone graft. The cleft was fully obliterated by grafted bone in the region of the alveolar process. The presence of bone permitted physiologic tooth movement and the orthodontic movement of adjacent tooth into the former cleft area. Satisfactory arch alignment could be achieved in by subsequent orthodontic treatment.