• Title/Summary/Keyword: 보존과학

Search Result 3,000, Processing Time 0.025 seconds

Eutrophication of Bottom Mud in Shellfish Farms, the Goseong-Jaran Bay (고성${\cdot}$자란만 패류양식장 저이의 부영양화)

  • CHO Chang-Hwan;PARK Kyung-Yang
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.16 no.3
    • /
    • pp.260-264
    • /
    • 1983
  • Organic matters as COD, ignition loss, phaeophytin pigment, and sulfide in the superficial bottom mud in the shellfish farms during summer in 1981 were determined to find an eutrophication level for the conservation of the farms. Both the Goseong Bay and the Jaran Bay, which are productive shellfish farms, are located along the southern coast of the Korean Peninsula. The Goseong Bay is 8m deep with a narrow mouth and approximately $17.5km^2$ in area, and the Jaran Bay 10m deep with $27.3km^2$. The bottoms are silty. Major shellfishes cultured are the oyster by the off-bottom method and the arkshell in the bottom. COD contents were $12.5{\sim}19.5\;mg/g$ dry mud, ignition loss $6.70{\sim}11.83\%$, phaeophytin pigment $6.8{\sim}11.0{\mu}g/g$ dry mud, and sulfide $0.18{\sim}0.64{\mu}g/g$ dry mud. There were no significant differences in the determined quantities between two bays. All quantities except the sulfide which is a little over than an eutrophication level, 0.3 mg/g dry mud, shows that the bottom muds are in an early stage of eutrophication. In addition, there was no particular increase in quantities of aforementioned four paramenters in comparision with those of 1976. It means that the eutrophication in the Goseong-Jaran Bay makes slow progress.

  • PDF

Genetic Diversity and Population Genetic Structure of Exochorda serratifolia in South Korea (가침박달 집단의 유전다양성 및 유전구조 분석)

  • Hong, Kyung Nak;Lee, Jei Wan;Kang, Jin Taek
    • Journal of Korean Society of Forest Science
    • /
    • v.102 no.1
    • /
    • pp.122-128
    • /
    • 2013
  • Genetic diversity and population genetic structure were estimated in nine natural populations of Exochorda serratifolia in South Korea using ISSR marker system. Average of polymorphic loci per primer was 5.8 (S.D.=2.32) and percentage of polymorphic loci per population was 78.7% with total 35 loci from 6 ISSR primers. In AMOVA, 27.8% of total genetic variation came from genetic difference among populations and 72.2% was resulted from difference among individual trees within populations. Genetic differentiations by Bayesian inference were 0.249 of ${\theta}^{11}$ and 0.227 of $G_{ST}$. Inbreeding coefficient for total populations was 0.412. There was significant correlation between genetic distance and geographic distance among populations. On the results of Bayesian cluster analysis, nine populations were assigned into three groups. The first group included 5 populations, and the second and the third had two populations per group, respectively. These three regions could explain 10.0% of total genetic variation from hierarchical AMOVA, and the levels of among-population and among-individual were explained 19.7% and 70.3%, respectively. The geographic distribution of populations following the three Bayesian clusters could be explained with mountain range as Baekdudaegan which is the main chain of mountains in Korea. The mountains as the physical barrier might hamper gene flow in the pearlbush. So when protected areas are designated for conservation of this species, we should consider those three regions into considerations and would better to choose at least one population per region.

Characterization of Probiotic and Functional Properties of Lactobacillus curvatus ML17, a Mukeunji Starter (묵은지 스타터 Lactobacillus curvatus ML17의 생균제적 특성 및 기능성 조사)

  • Kim, Hyo Ju;Sung, Hea Mi;Shin, Hyun-Kyung;Kim, Ki Myong;Yang, Eun Ju
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.43 no.7
    • /
    • pp.1009-1016
    • /
    • 2014
  • This study investigated the probiotic and functional characteristics of Mukeunji starter, Lactobacillus curvatus ML17, isolated from Mukeunji. Lb. curvatus ML17 was confirmed as a safe microorganism due to its non-hemolytic activity and non-production of harmful ${\beta}$-glucuronidase and ${\beta}$-glucosidase. Tolerance to artificial gastric and bile juice of Lb. curvatus ML17 was investigated. After incubation in artificial gastric and bile juice, the number of surviving cells was $1.38{\times}10^8$ CFU/mL. According to the results of adhesion assay, this strain also exhibited good adhesion to Caco-2 cells. Lb. curvatus ML17 showed good antimicrobial activity against food borne pathogens, especially Micrococcus luteus, Bacillus cereus, Salmonella enterica subsp. enterica, and Pseudomonas aeruginosa. Cell-free extract of Lb. curvatus ML17 exhibited high levels of DPPH scavenging capacity and inhibitory effects on growth of AGS human gastric adenocarcinoma cells and HT-29 human colon carcinoma cells. These results suggest that Lb. curvatus ML17 has potential for application in functional foods.

Applying the New Technology for Making Pontic Ridge Lap in Posterior Bridge Restoration (대체 신기법을 적용한 구치부 교의치 pontic ridge lap 제작방법)

  • Kim, Wook-Tae
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.29 no.3
    • /
    • pp.308-316
    • /
    • 2013
  • The purpose of this study is to investigate the production method of posterior bridges pontic ridge lap type which prevents the infection in bridge pontic base and is able to cleanse itself, in the process of producing final prothesis that maintains healthy mucous membrane of oral cavity and interproximal papilla, minimizing diastema, is aesthetic and has no effect on pronunciation. New technology is applied to make optimal pontic base which prevent inflammation and clean itself and its products were clinically evaluated in 10 places of dental clinics in busan and gyeongnam. The making of posterior 3 unit bridge pontic base, it was presented as the new technology of forming ridge lab type and to carry out clinical validation, existing conventional method and the new technology were compared. Pontic base made with the existing conventional method cause infection and other periodontal disease by 96% but the pontic base made with the new technology cause infection and other periodontal disease by 3%. Remains of food cause infection and other periodontal disease 100% by the existing conventional method and 91% by the new technology, showing a distinct difference. However, after a gargle, the new technology had low 13%. Additionally, the pontic base made with the existing conventional method showed 71% of chance, the new technology method showed 8% of chance in terms of self-cleansing.

Influence of Wood Decaying Fungi for Termite Ecology (목재부후균이 흰개미 서식에 미치는 영향)

  • Jo, Chang-Wook;Kim, Young-Hee;Hong, Jin-Young;Kim, Soo Ji;Lee, Jeung-Min;Choi, Jung-Eun
    • 보존과학연구
    • /
    • s.33
    • /
    • pp.99-108
    • /
    • 2012
  • The white-rot fungus (Trametes versicolor) and brown-rot fungus (Tyromyces palustris), which cause damage to a variety of wooden cultural properties and buildings, such as drying of the wood tissue, decay and cracks, sponge, and discoloration, give rise to serious structural and aesthetic problems. Moreover, pest termites (Reticulitermes speratus kyushuensis Morimoto) can cause damages like hollowing the outdoor beams or pillars of wooden buildings and finally causing such buildings to collapse due to the termites' destruction of the inside of the beams or pillars, leaving only a thin layer on their surfaces. This study was conducted to determine the impact of the wood-decay fungus, a representative damage-causing microorganism, and of insects and termites on the termite ecology. The damage ratio was calculated as the weight of the timber, and the overall total mass was reduced from two kinds of rot fungi. The white-rot fungi reduced the total wood mass, but the brown-rot fungi were observed to have had an increasing tendency to do so. The wood mass was measured after drying to determine the destruction capacity of termites. As a result, the wood mass consumed by the brown-rot fungi was shown to be greater.

  • PDF

Structures and some Properties of the Antimicrobial Compounds in the Red Alga, Symphyocladia latiuscula (참보라색우무에서 추출한 항균물질의 구조 및 특성)

  • LIM Chi-Won;LEE Jong-Soo;CHO Young-Je
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.33 no.4
    • /
    • pp.280-287
    • /
    • 2000
  • Three antimicrobial compounds (SL-l, SL-2 and SL-3) were isolated and identified from the marine red alga, Symphyocladia latiuscula. In addition, their biological functionalities such as cytotoxicity and desmutagenic activity were investigated. From the cryophyllized S. JatiuscuJa, SL-l, SL-2 and SL-3 were purified by solvent extractions and HPLC.SL-2 was crystallized in benzene-diethyl ether solvent. On the EI-MS spectra, it was found that they had three bromines in their structure which showed typical signal strength ratios at $M^+, [M+2]^+, [M+4]^+, [M+6]^+ (13: 38: 37: 12)$. $SL-l$ was identified as 2,3,6-tribromo-4,5-dihydroxybenzyl alcohol ($C_8H_7Br_3O_3, MW=374$) by NMR and MS spectra. SL-2 was assigned as 2,3,6-tribromo-4,5-dihydroxybenzyl methyl ether ($C_8H_7Br_3O_3, MW=388$) and confirmed by X-ray crystallographic analysis. SL-3 was presumed as an isomer of SL-2. Methanol extract of the S. latiuscula showed antimicrobial activities against all strains tested (bacteria, 15 strains; yeasts, 17 strains; fungi, 4 strains), much or less. The strongest inhibition activity of the methanol extract was to the Vibrio mimicus ($50 {\mu}g/ml$) and V. vulnificus ($50 {\mu}g/ml$). The mice injected intraperitoneally with 3 mg of SL-l and 5 mg of 5L-2 showed no acute toxicity response. SL-2 showed higher desmutagenic activity than SL-l against PhIP and MeIQx.

  • PDF

New trend of dental education: flipped learning for dental classes using Google classroom platform (치의학 교육의 새로운 트렌드 : 구글 클래스룸을 이용한 플립드 러닝(Flipped learning)의 적용 및 평가)

  • Kong, Jun-Hyeong;Moon, Ho-Jin;Park, Jung-Chul
    • Journal of Digital Contents Society
    • /
    • v.17 no.5
    • /
    • pp.317-327
    • /
    • 2016
  • Flipped learning is a new learning technique which can maximize the learning effect by mixing two or more different learning environments including online & offline, and recently introduced system: 'Google classroom' is the optimized internet platform for flipped learning. This study tried to apply flipped learning to regular course 2nd grade dental students(n=70) and evaluated the satisfaction of students. The subjects of periodontology and operative dentistry were chosen to evaluate flipped learning model for regular course 2nd grade dental students(n=70). Each class consisted of six classes, and three times of them were performed in conventional classes and the other three times were in flipped learning method by using Google classroom. Evaluation of satisfaction progressed at the end of class. In this study, application of flipped learning in the dental college classes showed high efficiency in terms of degree of understanding, self-directed learning and motivation. Collectively, it was shown that flipped learning using Google classroom can be a reliable platform in dental classes.

Study of Wooden Chukmok and Chukdu Used for East Asian Mounting (동양 장황에 사용된 축목과 축두에 관한 연구)

  • Jang, Yeonhee
    • Conservation Science in Museum
    • /
    • v.19
    • /
    • pp.53-68
    • /
    • 2018
  • Hanging scrolls and handscrolls are common mounting for East Asian painting and calligraphy in which wooden Chukmok with Chukdu of various materials are attached either at the top and bottom or at each side of a work. Hanging scroll paintings or calligraphy can be hung for appreciation and rolled up for preservation. The Chukmok and Chukdu of a hanging scroll were made from different materials and were known by distinct names in Korea, China, and Japan. In Korea, the wooden Chukmok were called sanghachukhoengmok(上下軸橫木), which means horizontal wooden bars for the top and bottom axes. The wooden Chukdu were called Chukdu(軸頭), meaning the head of an axis. These Chukmok and Chukdu were made of Korean red pine, nut pine, or shiny xylosma. In China, the rod was called zhougan(軸杆) and zhoutou(軸頭), and they were made of Japanese cedar, sappan wood, or red sandalwood. In Japan, the top rod was called hassou(八双; 八裝) and the bottom jikugi(軸木), and they were made of Japanese cedar, red sandalwood, or crystal. In Korean hanging scrolls, the cross section of a Chukdu is either flat or round, and it can be either patterned or patternless. The designs include concentric circles, two circles, and three circles. Among the portraits of meritorious subjects analyzed in this study, three examples feature concentric circles on Chukdu with a flat cross section, which coincides with most of the king's instructions housed at the Jangseogak Archives. This suggests that flat Chukdu with a concentric circle pattern were used for binding most of the paintings of meritorious subjects commissioned by the royal court.

Non-destructive Analysis of Material Characteristics and Provenance of Granite Monuments: The Cases of Stupa for National Preceptor Wongong at Geodonsa Temple and Five-story Pagoda at Cheonsusa Temple (비파괴 분석을 이용한 화강암류 석조 문화재의 부재특성과 산지추정: 거돈사 원공국사 승묘탑과 천수사 오층석탑을 중심으로)

  • Kim, Yonghwi;Choi, Seongyu;Seo, Jieun;Kang, Jeonggeuk;Lee, Jonghyun;Jo, Yeontae
    • Conservation Science in Museum
    • /
    • v.19
    • /
    • pp.19-40
    • /
    • 2018
  • Most stone monuments in Korea are made from the granitoids found extensively throughout the nation. To identify the provenance of the stone materials, this study carried out comprehensive analyses of the occurrence, physical properties, mineralogy, and chemical composition of Stupa for National Preceptor Wongong at Geodonsa Temple and Five-story Pagoda at Cheonsusa Temple, both located in the Gangwon region. Their features were compared with those of granite from Wonju City near the sites of the two monuments. Stupa for National Preceptor Wongong is composed purely of two-mica granite, whereas Five-story Pagoda was made from both two-mica and biotite granites. The occurrence and magnetic susceptibility of the two granite monuments generally coincide with those of granite from Wonju. When selecting materials for the restoration of stone monuments, it is deemed necessary to carry out a field survey on granite in areas adjacent to the locations of the stone monuments subject to restoration.

Metallurgical study of bronze bells excavated from the Miruksa (temple) site in Iksan (익산 미륵사지 출토 동종의 금속학적 연구)

  • Cho, Nam-chul;Huh, Il-kwon;Kang, Hyung-tae
    • 보존과학연구
    • /
    • s.27
    • /
    • pp.5-22
    • /
    • 2006
  • Mireuksa is a temple that was established in the Baekjea Period and continued around to the 16thcentury. The sites of the temple throughout diverse periods such as the United Shilla Period, KoryuPeriod, and Chosun Period including the one of the early temple in the late Baekjea Period were discovered. In those temple sites, there were lots of diverse artifacts discovered including artifacts in the Bronze Age. In this study, the compositions of four bronze bells excavated from Mireuksa site in Iksan were analyzed and the manufacturing technique of bronze bells was studied through the observation of microstructure. Also, the analytical cases of ancient bronze bells were collected and compared. Furthermore, the provenance study of the bronze bells site was attempted with the Pbisotope ratio. The results aim to offer crucial keys for discovering the aspect of society as well as information about the origin, development, and the route of propagation of ancient technologies. Bronze bell No. 1 showed an unexpected composition as Cu was found 98.5% in it. There were shown twins which were created by annealing and an even phase in the fine grains. It was also shown that bronze bell No. 2 and 4 had a high content of Pb although they showed a similar composition with general bronze bells in terms of Sn content. As shown in the analysis characteristics table of Korean bronze bell of this study, the ancient bronze bell used Pb of which content was limited to 2.12% in general, however, the results showed 15.5% and 13.2% respectively, which is an excessive amount. Asa result of analyzing inclusion in the microstructure of bronze bell No. 2, it was found that sulfide group mineral was used since there appeared S(14.55%). Also, it was proven that $CuFeS_2$ or$Cu_5FeS_4$ was used as a raw material because there was a small amount of Fe. As a result of analyzing inclusion of bronze bell No. 4, the bronze bell sample contained S(13.43%) and it is thought that sulfide group mineral was used, however, it had no Fe. Therefore, it is not connected to $CuFeS_2$ which is the main mineral of Korea. In addition, a strain line was shown with processing in bronze bell No. 2 and 4. As a result of provenance study of bronze bell No. 2 and 4 using the Pb isotope ratio, they or their raw materials are estimated to come from the southern China. Bronze bell No. 3 showed only Cu and Sn, and it is featured with a relatively low amount of Sn(6.63%). The microstructure has only phase, andintergranular corrosion was highly in progress.

  • PDF