• Korean Journal of Materials Research
• /
• v.5 no.3
• /
• pp.297-309
• /
• 1995

본 연구에서는 이온선보조증착법에 의해 Si(100)기판위에 정합성장된 $Si_{0.5}$Ge_{0.5}$층의 핵성성과 성장을 고찰하였다. 성장층에 대한 AFM(Atomic Force Microscopy), RHEED(Reflection High Energy Electron diffraction) 등의 분석결과 Si(100)기판위에 이온선보조증착에 의하여 성장된 $Si_{0.5}$Ge_{0.5}$층은 Stranski-Kranstanov(SK)기구로 성장되며, 300eV, 10 $\mu$A/$cm^{2}$의 Ar이온선을 조사시키는 경우 결정성이 향상되었고, SK 성장 방식의 임계두께가 증가하였다. Ar 이온선 조사에 의해 MBE에 의한 정합성장온도(55$0^{\circ}C$-$600^{\circ}C$)보다 훨씬 낮은 20$0^{\circ}C$에서 정합성장이 가능하였으며, $x_{mn}$값은 10.5%로 MBE에 의한 정합성장시 보고된 $x_{mn}$ 값보다 낮았다. 이온충돌에 의해 발생한 3차원 island의 분해와 표면확산의 증가가 $Si_{0.5}$Ge_{0.5}$층의 성장에 현저한 영향을 미쳤으며, 이온충돌의 영향은 3차원 island의 생성보다 3차원 island의 분해가 더 안정한 낮은 증착온도에서만 관찰되었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.566-569
• /
• 2018

A power line coupler that can apply high-frequency power to a railway overhead line structure was analyzed. It is difficult to supply auxiliary power to an overhead line in a high-voltage environment, and doing so requires a long-distance transfer. A method is proposed that utilizes the resonance on the Rogowski coil, which does not use a magnetic core. A simple overhead line structure was fabricated that consisted of a contact wire, messenger wire, and dropper. Couplers of various sizes were fabricated and deployed on the messenger wire, and the transfer characteristics of the two couplers were compared at a distance. As a result of applying the matching circuit to the coupler, the transmission efficiency was 53% at a distance of 2.5 m. The proposed method shows that it is possible to apply the auxiliary power by using the existing conductor in a special structure, such as the overhead line.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.360-363
• /
• 2010

This study evaluated surface dose of treatment immobilization devices such as Themo-plastic, Vac-lock, Cotton and Plaster according to their electron energy. Using a linear accelerater, a plane parallel chamber was set up on 6Mev, 9Mev, 12Mev and 15Mev. A distance between a source and a surface was 100cm and a field size was 10cm*10cm. An incident angle was 0 degree and a radiation dose was 100MU. To decrease an error, the measurement repeated 3 times. The analysis reveals that the surface dose of Vac-lock was the highest and Themo-plastic, Plaster and Cotton were high in order.

• Korean Journal of Environmental Agriculture
• /
• v.2 no.2
• /
• pp.114-119
• /
• 1983

Several supplementary heating methods were investigated to find their effects on night air temperature, injury in plant, growth and yield with Hokowase strawberry(Fragaria grandiflora) under greenhouse, during early spring season in 1981 and 1982. Kerosene lamp as a supplementary heating was not suitable because of its severe injury on strawberry plants, danger of accidental fire and bad smell. Paraffine candle and electric wire heating did not injure on strawberry plant, raised the minimum air temperature in greenhouse at night, enhanced growth, flowering and harvesting time of strawberry. Paraffine candle was effective as a supplementary heating method for short period growing under greenhouse, whereas electric wire heating was suitable for long period cultivation.

• Journal of the Korean Society of Radiology
• /
• v.18 no.2
• /
• pp.127-133
• /
• 2024

The elbow joint is made up of three different bones. X-rays or other radiological exams are commonly used to diagnose elbow injuries or disorders caused by physical activity and external forces. Previous research on the elbow joint reported a new examination method that meets the imaging evaluation criteria in the tilt position by Z-axis elevation of the forearm. Therefore, this study aims to design an optimized instrument and develop an aid applicable to other upper extremity exams. After completing the 2D drawing and 3D modeling design, the final design divided into four parts was fabricated with a 3D printer using ABS plastic and assembled. The developed examination aid consists of a four-stage Z-axis elevation tilt angle function (0°, 5°, 10°, and 15°) and can rotate and fixate 360° in 1-degree increments. It was designed to withstand a maximum equivalent stress of 56.107 Pa and a displacement of 1.6548e-5 mm through structural analysis to address loading issues caused by cumulative frequency of use and physical utilization. In addition to X-ray exams of the elbow joint, the developed aid can be used for shoulder function tests by rotating the humerus and also be applied to MRI and CT exams as it is made of non-metallic materials. It will contribute to the accuracy and efficiency of medical imaging diagnosis through clinical applications of various devices and medical imaging exams in the future.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1996.05a
• /
• pp.67-67
• /
• 1996

• Journal of the Society of Naval Architects of Korea
• /
• v.38 no.3
• /
• pp.14-22
• /
• 2001

This paper presents the results of hull form design and powering performance for a 2.500 ton class trimaran frigate. A series of resistance tests and numerical calculations have been conducted to figure out the influences of side-hull form and position on the resistance characteristics of the trimaran. And the propulsion test was conducted to investigate the propulsion efficiency of the trimaran, and the powering performance of the trimaran was compared with that of the similar mono-hull ships in full scale. From the research it was found that the longitudinal position of side-hull had a large influence on the resistance characteristics of the trimaran while the side-hull form and transverse position had a small influence on it. The trimaran showed favorable resistance performance when the side-hull was located near the stern of trimaran, which was resulted from the fact that the side-hull stem was located near the primary wave hollow generated by the main hul1. The powering performance of the trimaran was superior to that of the similar mono-hull ships above the middle speed range.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.87-95
• /
• 1999

In this study, we investigated the methods of computing deflection of the vertical and compared the results of deflections of the vertical computed from astronomical coordinates and GPS observations, and computed from PNU95, EGM96 geoid model. By comparing the results of the deflections of the vertical, we found out the followings; 1) The deflections of the vertical computed from astronomical coordinates and geoid models are similar to each other. 2) The difference between the deflections of the vertical computed from each geoid models was smaller than the difference of those computed from astronomic coordinates and geoid models. 3) The effects of distribution of the points on the results are less than those of the data used in the computation. If there exists reference data about the deflection of the vertical, it would be possible to evaluate the accuracy of the geoid model using this method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.41-41
• /
• 1994

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.40-40
• /
• 1994