• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.577-580
• /
• 2012

RRA Notification No.2010-36 suggests the 3-point method(fall-of-Potential) using 2 auxiliary poles only as a test method of earth resistance. However this method needs to much space to install auxiliary poles so it is very difficult to measure the earth resistance in spots such as a mountain district, rocky district. So, we have analyzed the methods of 2-point method and loop resistance method in IEEE std. 81 and ITU-handbook(Earthing and Bonding) and applied these methods in test bed with 3-point method. In this paper we have compared and analyzed the earth resistance value using these 3 methods.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.353-355
• /
• 2007

피접지체의 접지는 전력설비의 절연파괴,낙뢰 등으로 전압이 침입할 경우 접지전극의 접지저항이 높으면 접지전극으로 유입되는 전류와 접지저항의 곱에 해당하는 접지전극의 전위가 상승하게 되므로 설비의 파손 인축의 피해 등이 발생 할 수 있다. 따라서 접지저항은 낮은 값으로 유지하는것이 필요하고 정기적으로 측정하여 관리하도록 규정하고 있다. 대표적인 접지저항측정방법으로는 3전극법(Fall of potential method)과 Hook-on 측정법이 있다. 그러나 3전극법은 측정하고자 하는 접지전극으로부터 일정한 거리에 전류를 흘려주고 이때 대지 전위를 측정 할 수 있는 2개의 보조전극 설치가 필수적이나 접지극과 접지선의 단자와는 설치 위치가 다르므로 접지전극의 설치점을 확인하기 곤란하고 건물내부, 지하철, 터널 등에는 보조전극의 설치가 거의 불가능하므로 처음 설치한 접지극의 접지저항측정관리에 어려움이 크다. 또한 Hook-on 측정법은 다중 접지 계통에 사용하는 방법으로 접지극이 수십 또는 수백개를 병렬로 연결한 경우 측정하고저 하는 접지그의 접지저항값에 비해 나머지 접지전극 전체의 합성저항이 무시할 수 있을 만큼 적은 경우에만 측정할 수 있으므로 건물이나 변전실 등 수개의 접지극이 설치된 경우는 사용할 수 없다. 본 연구는 보조전극을 설치하지 않고 측정하고자하는 접지전극 상호간의 전류분배 비율을 저항의 역수 비율로 하여 각각의 접지 전극의 접지저항값을 운전 중인 상태에서 간단하고 정확하게 측정할 수 있는 새로운 접지저항 측정 방법에 관한 연구이다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1067-1072
• /
• 2012

Recently, linear motors have been widely researched and have been increasingly used in various industrial applications. Especially, permanent magnet linear synchronous motors(PMLSMs) have been getting the spotlight in the transportation system. A PMLSM is structurally simple and has a lot of merits such as high speed, high thrust force, etc. However, in case of a long stator system which arranges armature to the full length of transportation lines, a PMLSM has some disadvantages such as the material cost increase and long manufacturing time. Hence, in order to overcome these problems, the PMLSM with stationary discontinuous armature structure and concentrated windings was proposed. However, this method occurs undesirable cogging force by outlet edge effect. The cogging force causes thrust force ripples and generates noise and vibration. Therefore, in this paper, we proposed installation method of auxiliary pole PMLSM with concentrated winding applying bifurcating in order to reduce cogging force by the outlet edge when the armature is placed in a discontinuous arrangement. Also, we have examined characteristics of outlet edge cogging force using 2-D finite element analysis(FEA).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.889-895
• /
• 2011

PMLSM is structurally simple and it have a lot of merits such high speed, high thrust force etc., but cogging force by slot-teeth structure of armature and cogging force by outlet edge effect occurs. This is the cause of thrust force ripple and generate the noise and vibration. Therefore, in this paper we proposed installation of an auxiliary pole to mover of the PMLSM in order to decrease cogging force by the outlet edge which came necessarily into being discontinuous arrangement of the armature. Also, outlet edge cogging force designed a form of the auxiliary pole which the minimum became, and we compared a outlet edge cogging force characteristic along a winding method of an armature as we used 2-D of finite element analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.613-619
• /
• 2010

The stationary discontinuous armatures that are used in permanent magnet linear synchronous motors (PM-LSMs) have been proposed as a driving source for transportation systems. However, the stationary discontinuous armature PM-LSM contains the outlet edges which always exist as a result of the discontinuous arrangement of the armature. For this reason, the outlet edge cogging force generated between the armature's core and the mover's permanent magnet. This paper contemplated the outlet cogging for ceaccording to 2-D numerical analysis by FEM. We installed the auxiliary pole for in order to minimize the outlet cogging force.

• (The) Research of the performance art and culture
• /
• no.25
• /
• pp.5-30
• /
• 2012

I. Identity of Yeonsegeuk as total arts. The purpose of the thesis is to arrange the identy of Yeonsegeuk(Kino-Drama) which is theatre or film. The process of study is tried to discuss on the aethetic of Yeonsegeuk. II. Appearance of Yeonsegeuk and negative disputation of yeonsegeuk The first imported Yeonsegeuk from Japanese in Korea is made by the group of Mizuno Ganggetsu(水野觀月) on Oct. 16. 1915 at Pusan and also to run in Seoul at Hwanggeumgwan. The first of Korean Yeonsegeuk is by Kim, Dosan, a leader of Singeukjwa(theare group) on Oct. 27. 1919 at Danseongsa. Before the liberation of Korea from Japan all made korean Yeonsegeuk are 28 works. III. Dramatic form of Yeonsegeuk I study on the relation between Yeonsegeuik and Sinpageuik(new theatre of modern drama in 1920's). I find that Yeonsegeuik admitted the thechnics of the Sinpageuik and the contents. If We think that the theatre is synthetic art which genealize all arts, we can insist that the Yeonsegeuk is valued the total art as new performance to comply with film art to theatre. Conclusionly Yeonsegeuk is called 'Expanded Theatre' as the new performance which must be dicussed in the view of total art. VI. Discussion on the the aethetic of Yeonsegeuk When we compare the structure of film with the structure of theatre, we can't find a diffrent element between the structure of two art in art semiotic. But we find a fact that film art has special elements in mechanics character which are camera working and motage. These technics influence on the audience's mind. It is different point between Japan and Korean's Kino-drama and Germany's that is to admit the aethetic of total art or not. V. Yeonsegeuk as new performance During Korean modern times Kino-drama was first a kind of total art with stage and screen. But it is regretable that Kino-drama didn't have the background of theory which discourse on the comprehension of total art. As the result Kino-drama bring the confusion of argument that Kino-drama is total art or expanded theatre. This confusion will be disputed on film art as performing arts or future art as expanded film and total art.

• Journal of Chest Surgery
• /
• v.34 no.4
• /
• pp.296-304
• /
• 2001

배경: 이번 연구의 목적은 체내이식형 양심실 보조장치의 개발을 위한 안전하고 간편한 동물실험 모델을 확립하는 것이며 이동작동형 완전 인공심장의 양심실 보조장치로의 사용 가능성을 알아보는 것이다. 대상 및 방법: 7마리의 Corridale 양을 대상으로 실험하였다. 5번째 늑간극을 통하여 좌측 개흉술을 시행하고 좌측 유출로 캐뉼라는 하행 대동맥에 Dacron graft을 사용하여 연결하였고 유입로 캐뉼라는 좌심방에 삽입하였다. 우측 유출로 캐뉼라는 하행 대동맥과 같은 방법으로 주폐동맥에 연결하였으며 유입로 캐뉼라는 혜동맥을 하방으로 젖혀 우심방이를 노출시킨 다음 우심방이에 삽입하였다. 4마리에 있어서는 양심실 보조장치를 전복막강(preperitoneal space)에 위치시켰으며 2마리에 촤측흉강 내에, 1마리에서는 외부에 위치시켰다. aPTT는 수술전 aPTT의 2∼2.5배로 맞추어 주었다 결과: 수술중 또는 수술직후 사망한 경우는 없었으며 7마리 모두 인공호흡기 이탈이 가능하였고 스스로 기립하고 음식물 섭취도 가능하였다. 1마리는 술후 2일째 혈전 색전증 및 인공호흡기 작동 잘못으로 사망하였으며 2마리의 겨우는 술후 2일째 각각 양심실 보조장치의 작동 잘못 및 호흡부전으로 사망하였고, 3마리의 경우는 술후 4일째 혈전색전증으로 인한 급성신부전 및 호흡부전 등으로 사망하였다. 1마리에 있어서는 28일간 생존하였으며 양심실 보조장치의 구동 장치에 연결된 라인의 마로로 인해 양심실 보조장치의 작동이 정지되었으나 바로 양심실 보조장치를 제거하고 살릴 수 있었다. 모든 경우에 있는 캐뉼라를 삽입하고 양심실 보조장치를 작동시키는데 큰 어려움이 없었다. 7마리 중 4마리에서 혈전이 발견되었으며 특히 판막을 연결한 부위에 혈전생성이 많았다. 그러나 캐뉼라에는 혈전생성이 없었다. 결론: 양에 있어서 좌측 개흉술 및 전복막강 공간에 양심실 보조장치를 위치시키는 이번 동물실험 모델은 체내 이식형 양심실 보조장치 개발을 위한 좋은 동물실험 모델이라고 생각된다. 또한 디동 작동기형 완전 인공심장의 혈전생성을 억제할수 있는 방법들의 연구개발이 지속된다면 장기간의 체내 이식형 양심실 보조장치로 사용할 수 있을 것으로 생각된다.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.173-174
• /
• 2007

본 논문에서는 scan 전극과 common 전극 사이에 보조 전극을 가진 PDP에서 asymmetry, long gap mode 와 같은 새로운 구동방법을 제안한다. asymmetry mode에서 주전극의 가운데 부분에 위치한 보조전극은 리셋, 어드레스, 서스테인의 모든 구간동안 scan 또는 common 전극에 연결되어 있다. long gap mode에서는 전기적으로 끊어져있거나 초기 몇 개의 서스테인 펄스를 제외하고 서스테인 구간동안 Vs/2의 전압으로 유지된다. 제안된 조와 구동 방법에서 전력에너지소비를 최소화함으로써 더 높은 발광효율을 얻을 수 있다. 새로운 구동방법의 효용은 다양한 Xe분압상태에서도 연구되었다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.8
• /
• pp.86-92
• /
• 2009

In order to minimize ac mutual coupling, the auxiliary electrode are located at a right angle in measuring ground impedance. In case that the measurement space is limited, the alternative method is employed. At that time, it is necessary to investigate the measurement errors due to ac mutual coupling and earth mutual resistance in measuring the ground impedances. 'This paper presents the measurement accuracy according to the location of the current and potential auxiliary electrodes in measuring ground impedance of vertically or horizontally buried ground electrode. The measurement errors due to ac mutual coupling were evaluated Consequently, the effect of ac mutual coupling on the measurement accuracy for horizontally buried ground electrode is greater than that for vertically buried ground electrode. Measurement errors due to ac mutual coupling is the largest when the current and potential auxiliary electrodes are located in parallel. The 61.8[%] rule is inappropriate in measuring ground measurement. Theoretically, in case that the angle between the current and potential auxiliary electrodes is 90$[^{\circ}]$, there is no ac mutual coupling. If it is not possible to route the current and potential auxiliary electrodes at a right angle with limitation of measurement space, the location of these electrodes with an obtuse angle is preferred to that with an acute angle in reducing the measurement errors due to ac mutual coupling.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.3
• /
• pp.280-289
• /
• 2018

This study aimed to investigate the effects of learning with role-playing on student satisfaction and achievement regarding behavior management teaching in pediatric dentistry. 93 students were divided into 19 groups and randomly assigned to role-play as a doctor, patient, parent, assistant, or narrator. Their performances were evaluated by the instructor and the satisfaction survey was conducted. All participants took the written test and were asked to compare lecture and role-playing with regard to the effectiveness of learning. Statistical analysis was performed with Mann-Whitney U test, Independent T-test, and Kruskal-Wallis test. 68 students (73.1%) who believed that the role-playing was more helpful than lecture showed higher level of satisfaction than students who believed lecture was more helpful. But there were no differences in the tutor evaluation score and the written test scores. Participants in the patient management scenario showed higher level of descriptive question scores of the written test and tutor evaluation score than those who participate in the parent management scenario. There were no differences between the role groups. Role-playing may help students to become more interested and participatory in learning behavior management. The level of satisfaction may differ by the design and content of the scenario.