• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.533-539
• /
• 2020

Real-time service (RTS) provided by IGS provides correction for GNSS orbit and clock via internet, so it is widely used in fields that require real-time precise positioning. However, the RTS signal may be lost due to an unstable Internet environment. When signal disconnection occurs, signal prediction can be performed using polynomial models. However, the RTS changes rapidly after the GNSS navigation message issue of data (IOD) changes, so it is difficult to predict when signal loss occurs at that point. In this study, we proposed an algorithm to generate continuous RTS correction information by applying the difference in navigation trajectory according to IOD change. The use of this algorithm can improve the accuracy of RTS prediction at IOD changes. After performing optimization studies to improve RTS prediction performance, the predicted RTS trajectory information was applied to precision positioning (PPP). Compared to the conventional method, the position error is significantly reduced, and the error increase along with the signal loss interval increase is reduced.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.131-136
• /
• 2000

Ocean Scanning Multi-spectral Imager (OSMI)는 다목적 실용위성 (KOMPSAT) 1호기 아리라위성에 탑재되어 1999년 12월 21일 발사된 해양 관측 기기이다. OSMI는 발사후 3년 이상 생물학적 해양지리학 연구를 위해 전세계 바다색을 관측하는 임무를 수행할 것이다. OSMI는 센서 성능의 궤도상 보정을 위해 태양광 보정과 암흑 보정을 수행한당. 태양광 보정은 궤도상에서 장기간에 걸친 해양 결상계의 노화에 따른 성능 변화 감지 및 보정에 있다. 발사 직후의 초기 태양과 보정 측정 자료는 추후 성능 변화 감지에 대한 기준이 될 뿐만아니라 발사 직후 OSMI 센서 성능 파악 및 점검에도 사용될 수 있으므로 매우 중요하다. 태양광 보정의 구조 및 광학적 특성을 분석하고 OSMI 주요 관측파 장대역별로 태양광 보정계의 출력신호량을 예측하였다. 초기 운영 기간동안 얻은 OSMI 태양광 보정계의 발사후 최초 측정 자료를 분석하고 발사전 예측 성능과 비교하였다. 이 연구는 OSMI 센서 보정 및 영상 품질 이해에 유용할 것이다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.44-49
• /
• 2001

In this paper, we propose a new technique to compensate for the VCO nonlinearity using only the returned beat signal whose spectrum contains the internal reflections and the targets simultaneously. In the case of a distance measurement system using single antenna, the reflections from the circulator and the antenna are much larger than the return signal from target. The beat signal by these reflections is at much lower frequency than that of the target, and the VCO nonlinearity can be compensated for using these signals. Indoor experiments were carried out and the results show marked improvement in the shape of range profile and the range resolution.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1104-1110
• /
• 1999

When a FM-CW radar is used to measure the target distance, the nonlinearity relationship between the VCO control voltage and the output frequency makes an adverse effect on the measurement accuracy. Recently, many nonlinearity correction schemes using signal processing techniques and dedicated hardwares have been studied. This paper presents a signal processing technique to compensate for the VCO nonlinearity using a reference signal. To demonstrate the validity of the presented technique, several experiments were conducted and the results show reduction of the distortion in the range profile and the resolution improvement.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.638-646
• /
• 2005

In recent wireless communications, direct conversion transceiver or If sampling SDR-based receivers have being designed as an alternative to conventional transceiver topologies. In direct conversion receiver a.chitectu.e, the 1.equency/phase offset between the RF input signal and the local oscillator signal is a major impairment factor even though the conventional AFC/APC compensates the service deterioration due to the offset. To rover the limited tracking range of the conventional method and effectively aid compensation scheme in terms of I/Q channel imbalances, the frequency/phase offset compensation in RF-front end signal stage is proposed in this paper. In RF-front end, the varying phase offset besides the fixed large frequency/phase offset are corrected by using early-late phase compensator. A more simple frequency and phase tacking function in digital signal processing stage of direct conversion receiver is effectively available by an ingenious frequency/phase offset tracking method in RF front-end stage.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.232-237
• /
• 2010

In this paper, a slit light laser range finding method using perspective warping calibration is proposed. This approach has an advantage to acquire relatively high accuracy, although the optical system is nonlinear. In the calibration, we detect the calibration points which are marked on the calibration panel and acquire the center position of the slit light laser in the image, which are used for computing the real positions of the slit light by using perspective warping. A calibration file is obtained by integrating the calibration data with the transition of the panel. The range data is acquired by interpolating the center position of the slit light laser to the calibration coordinates. Experimental results show that the proposed method provides the accuracy of 0.08mm error in depth range of 130mm with the low cost optical system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1225-1232
• /
• 2008

In this paper, we describe a compensation method of diurnal effect which is one of the factors giving large effect on the performance when using ground-wave signals like Loran-C for a backup and substitute navigation system of global satellite navigation system such as GPS, and currently many researches of the topics are doing in USA and in Europe. In order to compensate diurnal effect, we find periodic frequency components by using the Least Square Spectral Analysis (LSSA) method at first and then compensate the effect by subtracting the estimated compensation signal, obtained by using the estimated amplitude and phase of the individual frequency component, from the original signal. In this paper, we propose a simple compensation algorithm and analysis the performance through simulations. From the results, it is observed that the amplitude and phase can be estimated with under 5 % and 0.17 % in a somewhat poor receiving situation with 0 dB Signal to Noise Ratio (SNR). Also, we analyze the obtainable performance improvement after compensation by using the measured Loran-C data. From the results, it is observed that we can get about 22 % performance improvement when a moving average with 5 minutes interval is employed.

• Journal of Navigation and Port Research
• /
• v.26 no.4
• /
• pp.419-426
• /
• 2002

The conventional RTK-GPS technique has many problems which are permission using RF wireless modem, influence of geographic obstacle using radio wave, frequency interference, finiteness of frequency resources. To solve these problems, in this paper, we designed the DGPS correction message transmission system as a method to substitute the RF wireless modem of RTK-DGPS receiver. Then the interface module was designed and implemented for linkage of GPS receiver and mobile phone. As a result worked differential surveying using receiving correction message using RS-232C and communication control, users of mobile station were worked differential surveying correction between mobile phones. Interface module system was received the same result of precision which was compared RF wireless modem system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.1
• /
• pp.41-54
• /
• 2004

In this paper, we propose a new digital hearing aid circuit that compensates the impaired threshold level changing nonlinearly using a multi-band compensation technique. In the algorithm the hearing frequency range 8kHz is divided into 64 bands which is 125Hz resolution. Each band is controlled finely to compensate the hearing impaired proportional to personal ROM table. The multi-band is introduced using a FFT/IFFT Processor which makes to control in frequency domain. As a result, the proposed circuit is more efficient $15\%$ than a conventional ones such as FIR filter architecture in terms of the compensation gun and accuracy. The hardware size was reduced $65\%$ than a general FFT by pre-handling of the input data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.10
• /
• pp.60-66
• /
• 2011

In this paper, we analyze the effects of estimation error in the active cancellation signal, which is intended to counter the pulsed-CW signal of a hostile radar. We also examine the effects of estimation error in maximum-likelihood estimation (MLE) and quadratic interpolation scheme from a radar signal active cancellation viewpoint. Then, we modify the correlation-based error compensation scheme which mitigates the estimation error of MLE to improve the performance of the active cancellation signal. Finally, we present simulation results to show that the correlation-based scheme has better performance than the other in terms of radar signal active cancellation.