• Title/Summary/Keyword: 보정계수 산정

Search Result 291, Processing Time 0.037 seconds

The Technique of Estimating the Right-Turn Adjustment Factor (우회전 보정계수 산정기법)

  • Kim, Gyeong-Hwan;Kim, Yeong
    • Journal of Korean Society of Transportation
    • /
    • v.19 no.4
    • /
    • pp.73-84
    • /
    • 2001
  • Korean Highway Capacity Manual applies 7 adjustment factors to estimate saturation flows at signalized intersections. Among the adjustment factors, the right-turn adjustment factor uses equation hard to understand and requires complicated computing process comparing other adjustment factors. Thus. this study was conducted in order to suggest a new technique of estimating the right-turn adjustment factor which is easy to understand and simple to computer by having reasonable degree of accuracy. In this study the right-turn saturation flow ratios which are important in estimating the factor are suggested and the equation to estimate the volume of right-turn on red signal(RTOR) is developed based on observed data. The right-turn saturation flow rates can be estimated according to turning radius and number of lanes of crossing road dividing right-turn lanes into canalized and uncanalized lanes. The RTOR volume is estimated using the proportion of the time during which RTOR is possible to the whole time of red signal according to the through traffic volume per lane of the approach at signalized intersections. The technique of estimating the right-turn adjustment factor suggested in this study, which follows the HCM2000 of U.S. in principal, first judges the right-turn lane to be used exclusively for right-turn or not by employing the RTOR factor and the judging equation developed in this study. Next, if the right-turn lane is not exclusive right-turn lane, the shared right-turn lane is classified into single lane approach or multi lane approach. Thus, a total of three methods of estimating the right-turn adjustment factor to the three cases are suggested in this study.

  • PDF

Study on The Estimation Method of storage constants based on basin shape factor at Design Flood Estimation (설계홍수량 산정시 유역형상계수에 따른 저류상수 산정방안에 관한 연구)

  • Park, Sang-Jin;Kang, Ho-Yeong;Hwang, Sung-Hwan;Moo, Young Il
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.508-508
    • /
    • 2015
  • '설계홍수량 산정요령(2012, 국토교통부)'에서 홍수량 산정시 유역면적이 $250km^2$이하의 유역을 하나의 유역으로 처리하여 홍수량을 산정하도록 제시하고 있다. 이는 소유역을 많이 분할하고 하도 홍수추적 및 합성을 통하여 홍수량을 산정할 경우 단일유역에 비해 홍수량이 과대하게 산정됨으로 이에 대한 개선방안으로 제시된 산정요령이다. 홍수량 산정 방법으로 실무에서 가장 많이 사용되고 있고 '설계홍수량 산정요령'에서 채택한 모형인 Clark 단위도법에 의한 방법으로 산정된 홍수량의 크기에 미치는 민감도가 도달시간보다 저류상수가 훨씬 크므로 합리적인 저류상수 결정방법이 매우 중요하다. 저류상수를 결정하는 방법에는 여러 가지 경험공식이 적용되고 있으며 그 중 '설계홍수량 산정 요령(2012, 국토교통부)'에서는 유역면적이나 유역형상 등을 고려하고 있는 Sabol 공식을 적용하도록 하고 있다. Sabol 공식은 유역형상계수에 의해 많은 영향을 받으며, 유역형상계수는 형상이 흐름방향으로 길쭉한지 넓적한지를 나타내는 지표로서 유역 평균폭을 본류 연장으로 나눈 값으로 정의되며, 통상 유역면적을 본류 유로연장의 제곱으로 나타낸다. 따라서 유역의 형상이 폭에 비해 길면 형상계수가 1보다 작아지며 반대로 길이에 비해 폭이 넓거나 형상이 둥글면 형상계수는 1에 근접하며, 일반적으로 우리나라 하천의 형상계수는 대부분 약 0.5~0.1 정도의 범위를 나타내고 있다. 그러나, Sabol공식을 적용하여 저류상수를 산정할 경우 유역형상계수가 극히 작을 경우 홍수량이 과소하게 산정되므로 적절한 유역분할을 통해 홍수량을 보정할 필요가 있다. 따라서, 미호천 권역에서 유역형상계수가 0.1 이하인 유역을 대상으로 단일유역으로 산정한 홍수량과 적절한 유역 분할 후 홍수량을 산정하여 비교하고 비슷한 규모의 인근유역의 홍수량과 기산정된 홍수량을 비교하여 유역형상계수 0.1이하에서의 적절한 소유역 분할 기준을 제시하여 홍수량이 과대 및 과소하게 산정되지 않도록 조정하는데 있다.

  • PDF

Estimation of spatial soil moisture using Sentinel-1 SAR images and ANN considering antecedent precipitation (선행강우를 고려한 Sentinel-1 SAR 위성영상과 ANN을 활용한 공간 토양수분 산정)

  • Chung, Jeehun;Lee, Yonggwan;Son, Moobeen;Han, Daeyoung;Kim, Seongjoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.117-117
    • /
    • 2021
  • 본 연구에서는 Sentinel-1A/B C-band SAR(Synthetic Aperture Radar) 위성영상을 기반으로 인공신경망(Artificial Neural Network, ANN) 모형을 활용해 금강 유역 상류 40×50 km2 면적에 대한 토양수분을 산정하였다. 10 m 공간 해상도의 Sentinel-1A/B SAR 영상은 8일 간격으로 2015년부터 2019년까지 5년 동안 구축하였고, SNAP(SentiNel Application Platform)을 통해 기하 보정, 방사 보정 및 잡음(Noise) 보정을 수행하고 VV 및 VH 편파 후방산란계수로 변환하였다. ANN 모형 검증자료로 TDR(Time Domain Reflectometry)로 측정된 9개 지점의 실측 토양수분 자료를 구축하였으며, 수문학적 개념인 선행강우를 고려하기 위해 동지점에 대한 강수량 자료를 구축하였다. ANN은 각 지점에 해당하는 토양 속성별로 모델링하고, 전체 기간 및 계절별로 나누어 모의하였으며, 전체 자료의 60%와 40%를 각각 훈련 및 테스트 데이터로 사용하였다. 산정된 토양수분은 상관계수(Correlation Coefficient, R)와 평균제곱근오차(Root Mean Square Error, RMSE)를 활용하여 검증을 수행할 예정이다.

  • PDF

Investigation of the Effect of Calculation Method of Offset Correction Factor on the GEMS Sulfur Dioxide Retrieval Algorithm (GEMS 이산화황 산출 현업 알고리즘에서 오프셋 보정 계수 산정 방법에 대한 영향 조사)

  • Park, Jeonghyeon;Yang, Jiwon;Choi, Wonei;Kim, Serin;Lee, Hanlim
    • Korean Journal of Remote Sensing
    • /
    • v.38 no.2
    • /
    • pp.189-198
    • /
    • 2022
  • In this present study, we investigated the effect of the offset correction factor calculation method on the sulfur dioxide (SO2) column density in the SO2 retrieval algorithm of the Geostationary Environment Monitoring Spectrometer (GEMS) launched in February 2020. The GEMS operational SO2 retrieval algorithm is the Differential Optical Absorption Spectroscopy (DOAS) - Principal Component Analysis (PCA) Hybrid algorithm. In the GEMS Hybrid algorithm, the offset correction process is essential to correct the absorption effect of ozone appearing in the SO2 slant column density (SCD) obtained after spectral fitting using DOAS. Since the SO2 column density may depend on the conditions for calculating the offset correction factor, it is necessary to apply an appropriate offset correction value. In this present study, the offset correction values were calculated for days with many cloud pixels and few cloud pixels, respectively. And a comparison of the SO2 column density retrieved by applying each offset correction factor to the GEMS operational SO2 retrieval algorithm was performed. When the offset correction value was calculated using radiance data of GEMS on a day with many cloud pixels was used, the standard deviation of the SO2 column density around India and the Korean Peninsula, which are the edges of the GEMS observation area, was 1.27 DU, and 0.58 DU, respectively. And around Hong Kong, where there were many cloud pixels, the SO2 standard deviation was 0.77 DU. On the other hand, when the offset correction value calculated using the GEMS data on the day with few cloud pixels was used, the standard deviation of the SO2 column density slightly decreased around India (0.72 DU), Korean Peninsula (0.38 DU), and Hong Kong (0.44 DU). We found that the SO2 retrieval was relatively stable compared to the SO2 retrieval case using the offset correction value on the day with many cloud pixels. Accordingly, to minimize the uncertainty of the GEMS SO2 retrieval algorithm and to obtain a stable retrieval, it is necessary to calculate the offset correction factor under appropriate conditions.

A Study on the Continuous Permissible Current Rating Calculation Methodology of Transmission Cable in Underground pipe Using a DTS Data (DTS 계측자료를 이용한 지중관로에서의 송전 케이블 허용전류 산정 방법론에 관한 연구)

  • Kim, Seong-Eun;Youn, Seok-Min;Jung, Woo-Jin;Lee, Hong-Kwan;Kim, Jung-Hoon;Kim, Sang-Tea;Son, Chun-Myoung
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.422-423
    • /
    • 2015
  • 현재 허용전류는 가장 열악한 조건과 여유분을 주어 계산하기 때문에 지중 송전 케이블의 실제 송전용량은 설계보다 상당히 큰 용량을 사용할 수 있다. 송전용량을 증대시키는 방법 중 하나로 DRS(Dynamic Rating System)를 도입하는 방법이 떠오르고 있다. DRS는 이미 상용화 되어있으나 지중관로의 경우 기존에 포설되어 있는 케이블에 DTS를 설치하기가 곤란하여 관로조건에서는 동적 허용전류를 산정하기에 어려움이 있다. 따라서 본 논문에서는 DTS 계측자료를 이용하여 보정계수법을 통한 허용전류 산정 방법론을 제안한다. 또한 지중관로의 맨홀부에서 측정한 케이블의 표면 온도를 이용하여 관로 내 케이블의 분포 표면 온도를 추정하고 보정계수를 통한 허용전류를 산정하는 방법론을 제안한다.

  • PDF

Calibration of Hargreaves Equation Coefficient for Estimating Reference Evapotranspiration in Korea (우리나라 기준증발산량 추정을 위한 Hargreaves 공식의 계수 보정)

  • Hwang, Seon-ah;Han, Kyung-hwa;Zhang, Yong-seon;Cho, Hee-rae;Ok, Jung-hun;Kim, Dong-Jin;Kim, Gi-sun;Jung, Kang-ho
    • Korean Journal of Agricultural and Forest Meteorology
    • /
    • v.21 no.4
    • /
    • pp.238-249
    • /
    • 2019
  • The evapotranspiration is estimated based on weather factors such as temperature, wind speed and humidity, and the Hargreaves equation is a simple equation for calculating evapotranspiration using temperature data. However, the Hargreaves equation tends to be underestimated in areas with wind speeds above 3 m s-1 and overestimated in areas with high relative humidity. The study was conducted to determine Hargreaves equation coefficient in 82 regions in Korea by comparing evapotranspiration determined by modified Hargreaves equation and the Penman-Monteith equation for the time period of 2008~2018. The modified Hargreaves coefficients for 50 inland areas were estimated to be 0.00173~0.00232(average 0.00196), which is similar to or lower than the default value 0.0023. On the other hand, there are 32 coastal areas, and the modified coefficients ranged from 0.00185 to 0.00303(average 0.00234). The east coastal area was estimated to be similar to or higher than the default value, while the west and south coastal areas showed large deviations by area. As results of estimating the evapotranspiration by the modified Hargreaves coefficient, root mean square error(RMSE) is reduced from 0.634~1.394(average 0.857) to 0.466~1.328(average 0.701), and Nash-Sutcliffe Coefficient(NSC) increased from -0.159~0.837(average 0.647) to -0.053~0.910(average 0.755) compared with original Hargreaves equation. Therefore, we confirmed that the Hargreaves equation can be overestimated or underestimated compared to the Penman-Monteith equation, and expected that it will be able to calculate the high accuracy evapotranspiration using the modified Hargreaves equation. This study will contribute to water resources planning, irrigation schedule, and environmental management.

Evaluation of Ductility Factors for MDOF Systems in Special Steel Moment Resisting Frames (철골 연성 모멘트 골조에 대한 다자유도 시스템의 연성계수 평가)

  • Kang, Cheol-Kyu;Han, Young-Cheol
    • Journal of the Earthquake Engineering Society of Korea
    • /
    • v.8 no.6 s.40
    • /
    • pp.13-22
    • /
    • 2004
  • Ductiluty factor has played an important role in seismic design as it is key component of response modification factor(R). In this stuty, ductility factors() are calculated by multiplying ductility factor for SDOF systems() and MDOF modification factors(). Ductility factors() for SDOF systems are computed from nonlinear dynamic analysis undergoing different level of displacement ductiluty demands and period when subjected to a large number of recorded earthquake ground motions. The MDOF modification factors() are proposed to account for the MDOF systems, based on previous studies. A total of 108 prototype steel frames are designed to investigate the ductility factors considering the number of stories(4, 8 and 16-stories), framing system(Perimeter Frames, PF and Distributed Frames, DF), failure mechanism(Strong-Column Weak-Beam, SCWB and Weak-Column Strong-Beam, WCSB), soil profiles(SA, SC and SE in UBC 1997) and seismic zone factors(Z=0.075, 0.2 and 0.4 in UBC 1997). It is shown that the number of stories, failure mechanisms (SCWB, WCSB), and soil profiles have great influence on the ductility factors, however, the structural system(Perimeter frames, Distributed frames), and seismic zones have no influence on the ductility factors.

A Study on Estimation of Roughness Coefficient Using a Representative Grain Diameter (대표입경을 이용한 조도계수 산정에 관한 연구)

  • Jin, Jung-Woo;Lee, Do-Hun;Lee, Eun-Tae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1731-1736
    • /
    • 2007
  • 본 연구에서는 체가름 시험을 통해 얻은 대표입경으로 조도계수를 산정하고 그 산정된 조도계수의 효용을 검정하고자 하였다. 체가름 분석을 통해 입도곡선을 작성하고 대표입경을 구함으로서 기 수립된 공식에 의한 조도계수를 산정하였다. 산정된 조도계수는 HEC-HMS의 하도추적 방법 중에 하나인 Muskingum-Cunge 8 point 방법과 HEC-RAS의 부정류 해석을 이용한 방법으로 얻은 조도계수를 비교하였다. HEC-HMS의 경우 대상유역인 오산천 유역에 대해 선행연구과정으로 저수지 방류량을 고려한 강우-유출 모형의 매개변수 추정에 관한 연구가 이뤄졌다(2006, 이아름). 선행연구에서는 계산된 유량과 실측 유량을 비교하여 Clark 단위도 방법의 매개변수를 추정하여 그 중 빈도가 큰 유출사상의 경우에 Sabol 식에 의한 모의 결과가 첨두유량의 재현성이 우수하게 나타남을 확인했다. 따라서 HEC-HMS 모형은 Clark 단위도 방법의 매개변수는 Sabol의 식에 의해 모형을 구성하고 2001년, 2002년, 2004년, 2005년의 사상에 대해 강우량, 기흥 저수지와 이동저수지의 실제 방류량을 이용해 유출량을 산정하였다. 이중 오산천 유역에 대해 선행연구에서 사용된 Muskingum의 하도추적 방법은 Muskingum-Cunge 8 point 방법으로 변경하여 대상유역에서의 조도계수를 산정하였다. HEC-RAS 모형의 부정류 해석은 2002년과 2005년의 사상으로서 상류단 경계조건으로 기흥 저수지의 방류량을 유량수문곡선으로 이용하였고, 하류단 경계조건으로는 회화수위관측소의 수위수문곡선을 이용했다. 대표입경을 이용해 얻은 조도계수를 HEC-HMS, HEC-RAS를 통해 검정한 결과 실측된 유량과 수위를 비교적 잘 재현해 내는 것으로 나타났으나, 조도계수의 보정을 통한 재현 유량과 수위를 비교했을 때, 대표입경을 통해 얻은 조도계수가 보정 조도계수보다 다소 작은 것으로 해석되었다.하고자 한다.해결책을 얻어내는 상호보완적인 결과를 추구한다. 그가 디자인하는 작품은 전형적인 이미지를 내포하지 않는다. 즉 그의 작품은 기존의 가치와 이념적인 것은 배제하고, 창의적인 개념을 도출하였다.형모서리는 건물 특화 성격이 강하므로 불가피할 경우 소형 액센트 광고 위치를 미리 벽면으로 할애하는 것이 경관 및 입면계획에 유리한 것으로 분석되었다. 불확실도 해석모형 등의 새로운 기능을 추가하여 제시하였다. 모든 입출력자료는 프로젝트 단위별로 운영되어 data의 관리가 손쉽도록 하였으며 결과를 DB에 저장하여 다른 모형에서도 적용할 수 있도록 하였다. 그리고 HyGIS-HMS 및 HyGIS-RAS 모형에서 강우-유출-하도 수리해석-범람해석 등이 일괄되게 하나의 시스템 내에서 구현될 수 있도록 하였다. 따라서 HyGIS와 통합된 수리, 수문모형은 국내 하천 및 유역에 적합한 시스템으로서 향후 HydroInformatics 구현을 염두에 둔 특화된 국내 수자원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이를 보이지 않음을 알 수 있었다. 자극에 차이가 있지 않나 추측되며 이에 관한 추후 연구가 요망된다. 총대장통과시간의 단축은 결장 분절 모두에서 줄어들어 나타났으나 좌측결장 통과시간의 감소 및 이로 인한 이 부위의 통과시간 비율의 저하가 가장 주요하였다. 이러한 결과는 차가운 생수 섭취가 주로 결장 근위부를 자극하는 효과를 발휘하는 것이 아닌가 해석된다. 이와 같은 연구결과를 통해 생다시마를 주원료로 개발된 생다시마차와 생다시마 음료가 만성 기능성 변비 증세를 개선하는 효능이 잠재적으로 있음을 확인하였다. 그러나 생약제재의 변비약 수준으로 변비 개선 효능을 증대하기 위해서는 재료 배합비의 개선이나 대장 운동기능을 향상시키는 유효성분의 보강 등이 필요하다는 점도 알 수 있었다.더불어

  • PDF

Conversion Factor Estimation of Temporal Time by Calibration for Minutely Rain Data Using Hourly Rain Data (시단위 강우자료를 활용한 분단위 강우자료의 보정과 임의시간 환산계수의 추정)

  • Oh, Tae-Suk;Oh, Keun-Taek;Moon, Young-Il;Park, Rae-Kon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.1215-1219
    • /
    • 2008
  • 수공구조물 설계에 있어 가장 중요한 기준이 되는 확률강우량은 기존에 발생한 시간강우와 일강우 자료를 이용하여 지속시간별 연최대치 계열을 빈도해석하여 수행하고 있다. 현재 기상청에서 제공하는 강우자료는 00시 00분부터 01시 00분까지 누적된 강우량을 01시 강우량으로 제공하고 있다. 이는 한 호우 사상에서 총강우량은 동일할지 모르지만, 강우의 발생별 시점, 종점 및 누적 강우량은 다르게 산정된다. 이와 같이 확률강우량 산정시 고정시간 강우자료를 수문학적 의미인 임의 지속시간별 강우량자료로 변환이 필요하다. 따라서, 본 연구에서는 37개 지점의 1분 단위 강우 관측자료를 이용하여 고정시간별 연 최대치 계열과 임의 지속시간별 연 최대치 계열을 추출한 후 두 자료에 따른 지속시간별 환산계수를 산정하였으며, 기존에 산정된 환산계수와 비교 분석하였다.

  • PDF