• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Korean journal of applied entomology
• /
• v.30 no.1
• /
• pp.18-28
• /
• 1991

The optimal pH of the extraction buffer was 7.5 considiering AChE stability and its buffer capacity when AChE was isolated and extracted from the housefly(Musca domesitca L.)and three other insect species with 0.01 M sodium phosphate buffer. Also, the optimal pH of the reaction buffer was 7.5 considering enzyme activity and its buffer capacity when AChE activity was measured with the substrate in 0.1 M sodium phosphate buffer. The Potter Elvehjem type homogenizer with Teflon pestle was used to homgenize the tissues. When preparing a AChE suspension by centrifuging the homogenate, 700 g supernatant of adult head for the housefly, 700 g supernatnat of 5th instar nymphal whole body for the brown planthopper, lipid-eliminated 10,000 g supernatant of 5th instar larval whole body for the diamondback moth, and 700 g supernatant of 4th instar larval head for the tobacco cutworm were considered satisfactory as enzyme sources in view of mass preparation, extraction efficiency and stability of enzyme activity during evaluation. When AChE suspensions of 4 insect species were stored at $-18^{\circ}C$, more than 90% of activity was maintained up to 3 weeks. Km values of AChEs of the housefly, the brown planthopper, and the diamondback moth were 0.042, 0.037 and 0.043 mM, respectively and AChE-specific substrate inhibition was observed at high concentration. Km value of the tobacco cutworm ChE was 1.15 mM and BuChE characteristics was observed, though further study is needed. The optimal substrate concentration for the AChE inhibition tests was 0.5 mM for the housfly, the brown planthopper, and the diamondback moth and 12 mM for the tobacco cutworm.

• The Korean Journal of Air & Space Law and Policy
• /
• v.21 no.2
• /
• pp.71-96
• /
• 2006

This paper intends to describe the carrier's duty for the delivery of international air cargo and the carrier's liability for the illegal delivery of cargo under the Montreal Convention, lATA Conditions of Carriage for Cargo and judicial precedents. Under the Article 13 of Montreal Convention, the consignee is entitled, on arrival of the cargo at the place of destination, to require the carrier to deliver the cargo to it, on payment of the charge due and on complying with the conditions of carriage. And unless it is otherwise agreed, it is the duty of the carrier to give notice to the consignee as soon as the cargo arrives. Under the Article 18 of Montreal Convention, the carrier is liable for damage sustained in the event of the destruction or less of or damage to, cargo upon condition only that the event which caused the damage so sustained took place during the carriage by air. And the carriage by air comprises by the period during which the cargo is in the carriage of the carrier. Under the Article 11 of lATA Conditions of Carriage for Cargo, carrier is liable to shipper, consignee of any other person for damage sustained in the event of destruction of loss of, or damage to, or delay in the carriage of cargo only if the occurrence which caused to the damage so sustained took place during the carriage as defined under Article 1. According to the precedent of Korean Supreme Court sentenced on 22 July 2004, the freight forwarder as carrier was not liable for the illegal delivery of cargo to the notify party (actual importer) on the airway bill by the bonded warehouse operator because the freight forwarder did not designate the bonded warehouse and did not hold the position of employer to the bonded warehouse operator. In conclusion, the carrier or freight forwarder should pay always attention the movement and condition of the cargo not to be liable for the illegal delivery of cargo.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2002.05a
• /
• pp.17-22
• /
• 2002

지구상에는 수천종의 버섯류가 자생하고 있어 유전자원으로서의 중요성이 지대할 뿐만 아니라 기능성 식품소재 및 각종 약리 활성을 나타내는 신약개발 소재로도 크게 주목을 받고 있다. 이들 버섯은 균사체의 영양대사로 얻어지는 대사산물이 축적된 자실체의 형태로 나타나는데, 최근에 와서 자실체 및 균사체의 추출물이나 균사체 배양물이 체질개선이나 각종 병의 예방과 치료에 효과가 있는 것으로 밝혀져 건강식품이나 의약품으로서의 용도가 크게 증가하고 있는 실정이다. 특히, 담자균이 생산하는 특정 구조를 갖는 다당류는 오래전부터 종래의 화학요법제와는 달리 숙주내의 면역 기능을 부활하여 소위 면역요법제로서의 항암효과를 나타냄이 알려져왔었다. 현재까지 제약 및 의학적인 방법이 질병의 주된 치료방법으로 이용되어 왔지만 최근에 특정식품의 섭취가 만성질환의 발생을 억제 또는 지연시킨다는 연구 보고가 나오면서부터 만성질환의 치료방법으로서 식이요법을 중요하게 생각하게 되었다. 따라서 새로운 식품소재 및 가공식품의 개발을 통한 성인병 등의 각종 질병예방이 국민보건문제 해결에 필수적이다. 현재 일본 등에서는 표고버섯, 구름버섯 및 치마버섯 유래의 다당체 또는 단백다당체인 lentinan, krestin 또는 PS-K, schizophyllan 및 PSP 등이 실용화되어 높은 가격에 판매되고 있다. 국내에서도 야생 구름버섯 자실체로부터 추출한 단백 다당체인 Copolang(광동제약)이 개발되어 PS-K와 유사하게 암의 치료에 병행 사용되고 있고, 또 강력한 항암활성이 보고된 상황버섯의 균사체 추출물인 단백 다당체가 Mesima-Ex FK(한국신약)라는 상품명으로 암의 치료에 병행 사용되고 있는 것으로 알려지고 있다. 담자균류와 아울러 미생물 유래 다당체는 그 구조와 특성에 있어서 매우 다양함을 지니고 있다. 이러한 미생물 유래 다당류의 공업적 생산과 이용에 대한 연구로서는 Leuconostoc mesenteroides가 생산하는 dextran이 혈장증량제로 개발된 이래 Xanthomonas campestris가 생산하는 pullulan, Zoogloea rgmigera가 생산하는zooglan둥이 대표적인 예로 보고되고 있다. 한편, 미생물 유래 다당류는 구성당, 분자량, 화학적 구조 등과 같은 특성의 차이에 의해 많은 종류가 존재하고 있으며, 다양한 물성 및 유화제, 응고제, gel 형성제, 필름 형성제, 흡착제, 안정제, 접착제 등과 같은 용도로 광범위하게 이용되고 있다. 또한 근래에 들어서는 미생물 유래 다당체가 지니는 항암활성이 확인되어 새로운 의약품으로서의 개발 가능성이 기대된다. 그 밖에도 기존에 알려져 있는 식물 및 해조류 유래의 다당체와는 달리, 발효조를 이용한 연속배양에 의해 공업적 대량 생산이 가능하며, 더욱이 생산된 다당체의 분리 및 회수가 용이하다는 이점을 지니고 있다. 최근에 들어서는 유전공학적 기법을이용한 고생산성 변이균주 및 새로운 기능을 지닌 다당체의 개발에 관한 연구가 보고되고 있는 등 고부가가치를 지닌 새로운 바이오 소재로서의 기능 및 용도 개발에 관한 연구가 활발히 진행되고 있다. 이러한 항암 활성을 나타내는 여러 가지 담자균류중 Agaricus blazei로부터 생산되는 다당체는 고형암 이외에 S형 결장암, 난소암, 유방암, 폐암, 간암 등에 효과가 입증되었고, 천연물질에 의한 암 면역요법으로 각광을 받고 있으며, 항암 및 항virus의 완치율과 저지율에서 현재 여러가지 약효가 있는 버섯중에서도 탁원한 효과가 있는 것으로 증명되고 있다. 이들 다당체는 사이토카인을 생산시켜서 T임파구와 B임파구의 항원 특이적인 면역반응을 활성화시키고, 세포장해성 T세포와 활성화 대식세포의 세포장해 기능을 충진시켜서 암세포를 파괴시킨다. 또한 콜로니 자극인자인 사이토카인을 생산시켜서 면역담당세포의 신생을 촉진시키기도 하며, 암의 화학요법과 방사선 요법으로 저하된 백혈구를 회복시키는 역할을 한다. 따라서 최근의 연구동향은 생산된 다당체의 항암활성을 향상시키고자 하여 배양기간중에 interleukin을 의도적으로 첨가하는 경향이 있다. 이러한 항암 활성을 나타내는 담자균체 유래 다당체는 버섯의 기원에 따라 그 형태에 약간의 차이를 나타내기는 하나 그 기본 형태는 ${\beta}-(1,6)-glucosyl$ 분지를 가진 ${\beta}-(1,3)-glucan$이며, 평균 분자량은 50 ${\sim}$ 200만 정도이다. Agaricus blazei의 원산지인 브라질의 피에다데(Piedade) 지방의 환경조건(산지의 습도는 80%, 낮 기온 $35^{\circ)C$, 밤 기온 $20{\sim}25^{\circ}C$로 대단히 높으며, 정기적으로 열대지방 특유의 소나기가 내리는 지역)에서 볼 수 있듯이 Agaricus blazei의 성장 환경은 매우 까다로운 편이며, 날것으로는 보관이 잘 안되기 때문에 그 재배에 큰 어려움이 있다. 또한, 고체배양에 의해 생산된 버섯 자실체로부터 유기용매 및 열수추출 방법으로 다당체를 생산하는 방법은 균일한 형태의 버섯 자실체를 공급받기가 어렵기 때문에 다당체의 생산 수율이 낮고, 많은 노동력이 요구되는 어려움이 있다. 그러나 액체배양에 의한 다당체 생산의 경우는 고체배양에 의한 다당체 생산에 비해 일정한 조건하에서 배양이 가능하다는 장점이 있으며, 항상 균일한 균사체 및 배양액을 얻을 수 있다. 따라서 원하는 유용물질을 쉽게 획득할 수 있는 장점이 있다.

• Korean journal of food and cookery science
• /
• v.30 no.6
• /
• pp.670-678
• /
• 2014

The purpose of this study was to find the optimal swelling method and condition for seacucumber to improve its taste and texture to accomodate the rapid increase of consumption. Another purpose was to try to determine an easy way to soak dried sea-cucumber under different conditions, and identify the influence of swelling time on the texture of sea-cucumber, in order to reduce preparation time and provide basic data for easy handling. After boiling or steaming for six different periods including 5, 15, 30 and 60 minutes the texture of the sea-cucumbers were compared, For the additive test, the sea-cucumbers were boiling for 30 minutes period with 4 different additives and the textures were compared, Since the texture is an important characteristic of sea-cucumber, there are many variables that affect this property including the, drying and preservation methods. This study provides basic understanding of the influence of the heating method, time and temperature on the swelling of sea-cucumber for handy use at processing sites.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.3
• /
• pp.119-123
• /
• 2013

Simplified control logic was devised to fabricate and operate the modified atmosphere (MA) container of fresh produce equipped with gas-diffusion tube whose opening/closing was controlled in response to real time $O_2$ concentration. This is a simplified ramification of the previously developed control logic using both $O_2$ and $CO_2$ concentrations ([$O_2$] & [$CO_2$]). The developed logic was applied to and tested by a container system filled with spinach at $10^{\circ}C$ having optimum MA window of [$O_2$] of 7~10% and [$CO_2$] of 5~10%. It was shown that setting the proper on-off limit (11%) for $O_2$ control based on the assumed relationship $[O_2]+[CO_2]$=21% could attain the desired $CO_2$ concentration just below the upper tolerance limit ($[CO_2]_H$, 10%). The $O_2$ control point can be the lower tolerance limit or adjusted one (21-$[CO_2]_H$) depending on the commodity's MA requirement. The developed logic using single $O_2$ sensor could attain the equilibrated [$O_2$] of 11% with [$CO_2$] of 8~9% which was desired and similar to that of its predecessor ([$O_2$] of 9~10% with [$CO_2$] of 10%) using both $O_2$ and $CO_2$ sensors. Both MA containers (one only with single $O_2$ sensor control and one with $O_2$ and $CO_2$ sensors) could also keep the spinach quality without significant difference between them, but significantly better than perforated control package of air.

• IMMUNE NETWORK
• /
• v.1 no.1
• /
• pp.87-94
• /
• 2001

Background: Cytokine-mediated ex vivo expansion has been proposed as a means of increasing the number of cord blood (CB) hematopoietic stem cells for transplantation. As well as stem cell number, stromal cells are necessary for functional maturation of hematopoiesis. The purpose of this study was to analyze the development of stromal cells during ex vivo expansion of CB $CD34^+$ cells. Methods : $CD34^+$ cells were purified from CB by magnetic bead selection. The levels of of interleukin-3, interleukin-$1{\beta}$, interleukin-6, granulocyte macrophagecolony stimulating factor and tumor necrosis factor-${\alpha}$ were measured in culture supernatants on 0, 1, 2, and 3 weeks, using ELISA techniques. CB $CD34^+$ cells were expanded in Iscoves modified Dulbeccos medium in the presence of several cytokines. The expression of E-selectin, vascular cell adhesion molecule-1, intercellular adhesion molecule-1, platelet/endothelial cell adhesion molecule-1, von Willebrand factor, vimentin, and CD14 in newly developed stromal cells was examined by immunocytochemical method. Relevant extracellular matrix (ECM) proteins and proper cytokines were also assayed for the most suitable condition for expansion of stromal cells. Results: Several cytokines were found to have been produced by CB $CD34^+$ cells as well as bone marrow-derived $CD34^+$ cells. During ex vivo expansion of CB $CD34^+$ cells, stromal cells appeared in the culture by day 4 and expanded over the following 7-10 days before being confluent by day 2 1. These cells expressed surface markers characteristic of cells of endothelial lineage. Furthermore, these stroaml cells also expanded effectively when treated with thrombopoietin+flt-3 ligand+stem cell factor+leukemia inhibitory factor or 0.1% poly-L-lysine-coated wells. Conclusion: Stromal cells were developed during ex vivo expansion of CB $CD34^+$ cells and that this development could be enhanced further by treating the stromal cells with cytokines or ECM.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.415-424
• /
• 2014

This study was carried out to determine the effect of storage condition, such as temperature or relative humidity (RH) in home-style refrigerator, on the change of quality traits and storage characteristics of Hanwoo M. longissimus to find out the condition for prolongation of shelf-life with maintaining the meat quality for consumers. Samples were sliced in $1{\pm}0.2cm$ thickness, and packed in foamed polystyrene tray with linear low-density polyethylene (LLD-PE) film to simulate the pre-packed Hanwoo loin sold in retail market, then stored in home-style refrigerator ($5^{\circ}C$/17% RH, Control), and chambers of $5^{\circ}C$/55% RH (T1), $5^{\circ}C$/85% RH (T2), and $-1^{\circ}C$/99% RH (T3), respectively. Quality traits (color, pH, water holding capacity, shear force and grilling loss) and storage characteristics (thiobarbituric acid reactive substances, volatile basic nitrogen and total microbes) were measured at 1, 4, 7, 14 and 21 days after storage. Lightness of Hanwoo loin stored in T1, T2 and T3 were higher than that of control until 14 days of storage, however at the end of storage (21 days) control showed significantly higher than other treatments (p<0.05). Redness and Yellowness of Hanwoo loin samples stored in T1 and T3 were significantly higher than others during all storage period (p<0.05). The water holding capacity (WHC) of control was significantly higher than others until 14 days of storage (p<0.05), however, Hanwoo loin stored in T2 was the highest ($63.64{\pm}7.62kg/cm^2$) at 21 days of storage. Hanwoo loin stored in T1 showed significantly lower shear force than others during all storage period (p<0.05). There was no consistent tendency in pH and grilling loss during storage in all treatments. Hanwoo loin stored in T1 showed lower TBARS value than others during storage period, however there was a rapid increase to $0.34{\pm}0.27mg$ malonaldehyde/kg meat at 21 days of storage. And, all the treated samples (from T1 to T3) showed significantly lower VBN values at 21 days of storage (p<0.05). The population of total aerobic microbes were significantly increased in all treatments as storage period increasing, and the population of T3 ($2.28{\pm}0.57logCFU/g$) was the lowest at 21 days of storage (p<0.05). From those results, it could be predicted the better storage condition to maintain the meat quality and prolong the shelf-life of Hanwoo loin by lowering the temperature and adjusting the humidity about 55%.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.85-89
• /
• 2018

The effects of distribution temperature due to season all changes on quality and storability of baby leaf beet (Beta vulgaris L.) was examined in modified atmosphere (MA) packages. The beet leaf had been harvested at the 10 cm leaf length stage and packaged with an oxygen transmission rate (OTR) film of $1,300cc{\cdot}m^{-2}{\cdot}day^{-1}{\cdot}atm^{-1}$ and then held at 4 different distribution temperatures which were $-2^{\circ}C$, $4^{\circ}C$, $20^{\circ}C$, or $30^{\circ}C$ for 5 hrs and then stored for 18 days at $8^{\circ}C$. The loss of fresh weight of packged baby leaf beet was lowest at the $4^{\circ}C$ treatment, and below 0.6% in all distribution temperature treatments. The atmosphere composition in packages did not show any significant differences among treatments. The oxygen conc. was the highest at 18.0% after the $4^{\circ}C$ treatment, carbon dioxide conc. showed the maximum value of 4% at the $30^{\circ}C$ and $-2^{\circ}C$ treatments, and ethylene conc. was highest at the $10^{\circ}C$ treatment after 10 days in storage. The hardness was the highest at the $4^{\circ}C$ treatment on the final storage day. The $4^{\circ}C$ treatment showed the highest visual quality and the lowest off-odor and aerobic plate count. Therefore, it is necessary to establish a low-temperature distribution system which is controlled under $4^{\circ}C$, because the baby leaf beet's storability and microbial growth are effected even during a short time of 5 hrs during the distribution process.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.26 no.3
• /
• pp.520-527
• /
• 1999

For the purpose of providing some suggestions in selection of filling materials used in 'sandwich technique', the bond strengths between glass ionomer cement bases and composite resins were investigated and compared. For lining materials, 'Vitrebond' and 'Ketac-fil' were used. Using these two as bases, 10 of each following resins were built up on the top ; Z-100 (light curing resin) Clear-fil (chemical curing resin), Bis-core (dual cure resin), Dyract (compomer), therfore 10 specimens of each group and total of 80 specimens were made. After storing specimens in $37^{\circ}C$ deionized water for 24 hours, the shear bond strengths were measured under universal testing machine with 50 kg of full load scale and 1mm/min of cross-head speed and obtained the results as follows : 1. Over Vitrebond base, Z-100 showed the lowest bond strength but the other three did not show any difference in bond strength. 2. Over Ketac-fil base, Clear-fil showed the highest bond strength followed by Dyract, Bis-core, and Z-100 showed the lowest bond strengths. 3. Whereas Clear-fil showed the similar bond strengths on the Vitrebond base as other resins, it showed the highest bond strength on Ketac-fil base, which showed some difference in bond strength by differing GIC bases. 4. The bond strengths between base materials and composite resin showed a stronger resin-dependence tendency in cases with Ketac-fil bases rather than with Vitrebond bases.