• Journal of Food Hygiene and Safety
• /
• v.33 no.5
• /
• pp.347-353
• /
• 2018

Red pepper is widely used as a spicy flavor ingredient in the food industry and many households. The objective of this study was to assess the total aerobic bacteria count, coliforms count and incidence of Escherichiacoli, Salmonella spp., Escherichiacoli O157:H7, Listeria monocytogenes, and Bacillus cereus in red pepper and red pepper cultivated soil. The total aerobic bacteria number in red pepper and soil were in the range of 2.97 to 8.13 and 5.91 to 7.65 log CFU/g, respectively. The coliforms in red pepper and soil were in the range of 1.87 to 6.71 and 0.67 to 6.16 log CFU/g, respectively. E. coli was detected in 3 of 54 soil samples. In 3 out 63 red pepper and 53 of 54 soil samples, B. cereus was detected, while Salmonella spp., E.coli O157:H7, and L.monocytogenes were not detected. The results from this study provide an important basic information associated with the microbiological safety of fresh vegetables. Continuous caution is needed to prevent the contamination of pathogenic microorganisms during its farming.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.158-169
• /
• 2005

This study was done to evaluate the shear bond strength between light-cured glass ionomer cement (GIC) base and resin cement for luting indirect resin inlay and to observe bonding aspects which is produced at the interface between them by SEM. Two types of light cured GIC (Fuji II LC Improved, GC Co. Tokyo, Japan and Vitrebond$^{TM}$, 3M, Paul Minnesota U.S.A) were used in this study. For shear bond test, GIC specimens were made and immersed in 37$^{\circ}C$ distilled water for 1 hour, 24 hours, 1 week and 2 weeks. Eighty resin inlays were prepared with Artglass$^{(R)}$ (Heraeus Kultzer Germany) and luted with Variolink$^{(R)}$ II (Ivoclar Vivadent, Liechtenstein). Shear bond strength of each specimen was measured and fractured surface were examined. Statistical analysis was done with one-way ANOVA. Twenty four extracted human third molars were selected and Class II cavities were prepared and GIC based at axiopulpal lineangle. The specimens were immersed in 37$^{\circ}C$ distilled water for 1 hour, 24 hours, 1 week and 2 weeks. And then the resin inlays were luted to prepared teeth. The specimens were sectioned vertically with low speed saw. The bonding aspect of the specimens were observed by SEM (JSM-5400$^{(R)}$, Jeol, Tokyo, Japan) .There was no significant difference between the shear bond strength according to storage periods of light cured GIC base. And cohesive failure was mostly appeared in GIC On scanning electron micrograph, about 30 - 120 $\mu$m of the gaps were observed on the interface between GIC base and dentin. No gaps were observed on the interface between GTC and resin inlay.

• Restorative Dentistry and Endodontics
• /
• v.30 no.3
• /
• pp.178-183
• /
• 2005

This study was done to evaluate whether vital bleaching agents could influence on the translucency of the bovine enamel. The anterior bovine teeth that were extracted one day before and without any gross discoloration were obtained and then were preserved in physiologic saline. 6 mm cylindrical tooth specimens were fabricated with diamond puncher perpendicularly on labial surface of bovine tooth. After embedded in transparent acrylic resin with labial surface being exposed, they were cut to a thickness of 1.2 mm with low speed diamond saw (Isomat, Buehler Co., Lake Bluff, IL, USA). They were smoothly ground to 1 mm thickness of enamel with sandpaper. 24 specimens were randomly divided into 3 groups and control group respectively. Opalescence (10% carbamide peroxide, Ultradent, South Jordan, USA), Rembrandt (10% carbamide peroxide, DenMat, USA) and Opalescence F (15% carbamide peroxide with fluoride, Ultradent, USA) were applied on labial sides of the bovine enamel for 7 days (bleaching agents were reapplied every 24 hours) and the opposite surface was contacted to cotton that soaked in distilled water. The control group was soaked in distilled water. Three stimulus value X, Y and Z were evaluated with colorimeter (Color ' Color Differencerneter, Model TC-6FX, Tokyo Denshoku Co., Japan) on the labial surface of all specimen three times on white and black background plate before the bleaching agents were applied and on 3rd, 5th and 7th day after applied. The degree of translucency was normally assessed by measuring the inverse property, opacity (contrast ratio). 10% Opalescence, 15% Opalescence-F, and control group showed no significant variation in the translucency of bovine enamel, However Rembrandt decreased the translucency of it (p < 0.01).

• Korean Journal of Food Science and Technology
• /
• v.35 no.5
• /
• pp.803-811
• /
• 2003

This study compared the physicochemical characteristics of yellow pigments in domestic and imported yellow croakers during distribution and storage. The croaker is generally adulterated by mixed color product of red and yellow pigment. This study found that the yellow pigment was stable during pH and temperature changes, but the red pigment was less stable than the yellow pigment. As for the light effect on the yellow pigment and the red pigment, there was no change in the remaining rate of the pigment stored in a dark place. The moisture content decreased according to the storage period, and the width of changes was large in the order of croaker stored at $5^{\circ}C$, croaker stored at $15^{\circ}C$ and dried croakers. The yellowness value of the abdomen of the adulterated white croaker did not show any large difference at the initial stage and for a storage period of 10 days at $5^{\circ}C$. However, the yellow croakers showed a decreasing trend according to the storage period at $15^{\circ}C$. The croaker can be generally adulterated by a mixed color of red and yellow pigment. For the texture change in accordance with the storage condition of the croakers, both the yellow and white croakers showed a gradually increasing trend of hardness when stored at $5^{\circ}C$ and $15^{\circ}C$.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.295-300
• /
• 2015

Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.318-324
• /
• 2015

Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.3
• /
• pp.265-274
• /
• 2002

Background : Tumor associated antigens, which are produced specifically by tumor cells, are promising targets for the early diagnosis and immunotherapy. Among the tumor associated antigens, MAGE (a melanoma antigen), BAGE, GAGE, PRAME and NY-ESO were named as cancer/testis specific antigens they are detected exclusively in the testis or cancer cells If MAGE is easily detectable in the sputum, it would become a convenient method for diagnosing lung cancer. This study was undertaken to investigate MAGE expression in the induced sputum obtained from lung cancer patients. Materials and Methods : In 14 control patients and 30 lung cancer patients, the induced sputum was collected after inhaling 3% saline(5 cc) delivered by nebulizer for approximately 5 minutes after a mouth rinse and bronchodilator inhalation. The induced sputum was placed in a conservative-mixed solution (guanidinium isothiocyanate, Triton X-100). The total cellular mRNA was extracted from the cells and RT PCR and nested PCR were run in 30 and 35 cycles respectively, with two different types of primers specially designed to detect six subtypes of MAGE DNA simultaneously. Results : MAGE expression was not detected in the 14 controls, but in the 30 cancer patients, MAGE was found in 24 patients (80%, p=0.001). In the cancer patients, there were no differences in the expression level according to the tissue types (squamous cell cancer 13/17, adenocarcinoma 7/9, and small cell cancer 4/4, p-0.56). Among the 24 MAGE-positive patients, the tumor was not visible on a bronchoscopy in 11 patients (45.8%). Conclusion : A study of MAGE in induced sputum appears to be a useful and complementary method in the diagnosis of lung cancer. A further prospective study with more patients is recommended.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.1
• /
• pp.36-43
• /
• 1999

Background : Tumor growth is the net result of intrinsic proliferation and escape from active cell death. bcl-2 is a member of a new category of oncogenes that is not involved in influencing cell proliferation but is involved in regulating cell death(apoptosis). Based on this information, it seems to be reasonable to expect that there may be clinical prognostic significance of bcl-2 expression in non-small cell lung cancer. But its prognostic significance is not established. Methods: To investigate the role of bcl-2 in lung cancer, we performed immunohistochemical stain of bcl-2 on 57 biopsy specimens from resected primary non-small cell lung cancer. Thereafter, flow cytometric cell cycle analysis was done. And we analyzed the correlation between bcl-2 expression, clinical parameters, S-, $G_1$-phase fraction and survival. Results: bcl-2 were detected in 43.8% of total 57 patients(according to histology, squamous cancer 47%, adenocarcinoma 32%, according to TNM stage, I 28.6%, II 52.3%, III 45.5%. both differences were insignificant). By using the flow cytometric analysis, mean S-phase fraction of bcl-2(+) and (-) group were 14.1($\pm7.8$)%, 24.7($\pm10.5$)% (p<0.005), mean $G_1$-phase fraction of bcl-2(+) and bcl-2(-) group were 75.5($\pm10.8$)%, 65.5($\pm11.4$)%(p<0.05). 2yr, 3yr and 5yr survival and median survival time of bcl-2(+) group were 65%, 54%, 41%, 53 months, and those of bcl-2(-) group were 71%, 52%, 46%, 37 months. (p>0.05, Kaplan-Meier, log rank) Conclusion: bcl-2 was detected in 43.8% of primary non-small cell lung cancer. The S-phase fraction of bcl-2(+) group was less than bcl-2(-) group, and G1-phase fraction of bcl-2(+) group was more than bcl-2(-) group. But, expression of bcl-2 could not be a prognostic factor.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.821-828
• /
• 2016

The water quality and phytoplankton presence in the ballast water (BW) of 37 vessels originating from the international ports of China were investigated to facilitate negotiations for exemptions to the Ballast Water Management Convention (BWM Convention). The shortest duration given BW spent in a vessel was $3.91{\pm}4.61days$ in area "A", which included the Bohai Sea. Total suspended solids, dissolved organic carbon, and particulate organic carbon ranged from 1.80 to $266mg\;L^{-1}$, from 1.09 to $5.79mg\;L^{-1}$, and from 0.17 to $3.65mg\;L^{-1}$, respectively. A low average concentration of nutrients was measured in BW from area "C", but the concentration of nutrients in BW from area "B" (around the Changjiang estuary) was high, which may be related to the relevant supply of freshwater. A high chlorophyll-a concentration (> $1{\mu}g\;L^{-1}$) was measured in six vessels, three of which carried BW in the area "A". High abundance of phytoplankton (> $10,000cells\;L^{-1}$) was measured in four vessels, two of which carried BW in the area "C". Vessel No. 37, originating from Hong Kong Bay in area "C", showed a high density of dinoflagellates. The results suggest that BWM Convention exemption negotiations with China should be performed cautiously.