• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.145-152
• /
• 1999

In the applying of the reinforced soil method, it would be possible to obtain reinforcement effect more than before in terms of economic if high water content clayey soils could be used as embanking material. Futhermore it would be possible to expect the expansion of the applying field of reinforced soil method too. In this study, the authors describe the analysis results on the behavior of 5 meter high walls reinforced with nonwoven geotextile having the permeability and woven geotextile or geogrid having large tensile strength on the soil ground. The behavior of the walls were investigated for about 100 days after construction and the deformations of reinforcements, lateral soil pressures, vertical and horizontal displacements of the walls were examined by automatical measuring system. It was found that this kinds of reinforcing system might effectively improve the performance of the steep walls by virtue of the reciprocal action between soil and reinforcements, and it might be concluded that construction of the clayey reinforced soil walls with three kinds of geotextiles could be done successfully even on the comparative weak ground.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.06a
• /
• pp.119-127
• /
• 2003

For the calculation of internal stability, the hypothesis in conventional design is on the basis of two distinct zones, which are‘active zone’and‘passive zone’. This means that there is an abrupt discontinuous transition from active to passive states across a potential failure line. The existence of a discontinuity of this nature appears physically unreasonable, especially from kinematic considerations. A series of pull-out model tests was undertaken from a wall being rotated about the toe to find the strain distribution mobilized from near the wall face into the deep, stable zone through the centre plane. With this finding of transition zone, the objective of study is aiming at identifying the likely effect of this zone in designing method by comparing with the prevailing design method.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10a
• /
• pp.63-68
• /
• 1993

Soil nailing is a method of reinforcing natural deposits of soil with passive inclusions, called nails, of steel or other materials. Its purpose is mainly to increase the tensile and shear strength of the soil mass. This method has been widely used during the last two decades to stabilize steep slopes in several countries (France, Germany, USA, Japan, etc.). The design methods that have been mostly used are Davis method, German method, and French method which are based on limit equilibrium approaches, and Juran method which utilizes the kinematical limit equilibrium design concept. This paper is focussed on the evaluation of the available design methods(especially, the France, Davis and German design methods) through comparison with each different assumption for the failure surface, the concept of failure mechanism and the definition of safety factor. The parametric study to identify the effects of design parameters on the overall factor of safety has also been conducted. By considering the results along with the associated assumptions which have been postulated in the several methods, the applicability of the method for a given soil and nail conditions has been evaluated.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10a
• /
• pp.69-72
• /
• 1993

In this paper, relatively new slope reinforcing system using an anchored wall is presented. For practical design purposes a method of external and internal stability analyses of an anchored wall installed at the toe of the original unstable or quasi-stable slope is developed. And also Murray's full-scale test results are compared with the passive resistance of an anchor predicted by the present study. Finally a design example of reinforced slope using an anchored wall is analyzed, and the safety as well as benefits is compared with a method of changing the geometry of the original unstable slope.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.185-192
• /
• 1999

This paper presents the results of a parametric study on the behavior of tunnel face reinforced with horizontal pipes. A three-dimensional finite element model was adopted in this study to capture the three-dimensional nature of tunnel face behavior under various boundary conditions. A parametric study was peformed on a wide range of boundary conditions with emphasis on the effect of reinforcing layouts on the deformation behavior of tunnel face. The results of analysis such as tunnel face deformation behavior under various conditions were thoroughly analyzed, and a database for the behavior of tunnel face under different reinforcing conditions was established for future development of a semi-empirical design/analysis method for the tunnel face reinforcing technique. The results indicated that there exits an optimum reinforcing layout for a given tunnel condition, which must be selected with due consideration of tunnel geometry and ground condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.79-86
• /
• 2000

This paper presents the results of a parametric study on the behavior of tunnel face reinforced with horizontal pipes. A series of reduced-scale model tests was carried out to in an attempt to verify previously performed three-dimensional numerical modeling and to investigate effects of reinforcement layout on the tunnel face deformation behavior The results of model tests indicate that the tunnel face deformation can significantly reduced by pre-reinforcing the tunnel face with longitudinal members and thus enhancing the tunnel stability. In addition, the model tests results compare fairly well with those from the previously performed three-dimensional finite element analysis. Therefore, a properly calibrated three dimensional model may effectively be used in the study of tunnel face reinforcing technique.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.101-108
• /
• 2000

In this study, an expert system was developed to predict the safety of tunnel and choose proper tunnel reinforcement system using fuzzy quantification theory and fuzzy inference rule based on tunnel information database. The expert system developed in this study have two main parts named pre-module and post-module. Pre-module decides tunnel information imput items based on the tunnel face mapping information which can be easily obtained in-situ site. Then, using fuzzy quantification theory II, fuzzy membership function is composed and tunnel safety level is inferred through this membership function. The comparison result between the predicted reinforcement system level and measured ones was very similar. In-situ data were obtained in three tunnel sites including subway tunnel under Han river, This system will be very helpful to make the most of in-situ data and suggest proper applicability of tunnel reinforcement system developing more resonable tunnel support method from dependance of some experienced experts for the absent of guide.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.144-169
• /
• 2010

In 2002, property loss caused by failure or leakage of existing river levee structures was about 1.8 trillion in Korean Won, and furthermore in which damages of river structures are getting more severe due to characteristics of extremely extraordinary rain such as torrential rain in the locality or guerrilla heavy rain. In this regards, this paper collects and analyzes those damage records and costs for repair by statistic method, and moreover categorizes the causes of failure, erosion and overtopping of levee structures in large and small scale rivers threatened frequently by typhoon and heavy rainfall. It is believed that the results from the analyses can be used as a basic source in developing criteria of standards for design, construction, maintenance and inspection(or diagnosis) of hydraulic structures such as levee and drain conduit.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.676-686
• /
• 2010

Damage Cases of variously type are reported that the ground subsidence is caused by the underground cavities at structure and construction works in lime stone or abandoned zone. A underground cavities by direct for zone having an effect on structure have been filled with cement agents. But this measure is urgently needed in materials and work methods, because ground water pollution at water down fillings and flow out, ground disturb at high participle, damage of farms and fishery. The research confirm application of filling method and filling materials of environmentally friendly and economical by Hi-FA new materials have both liquidity and viscosity from case reinforcement in APT site, Gunsan.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.479-488
• /
• 2005

Geopier soil reinforcement system which crushed aggregate is put into a hole and rammed the aggregate with tamper is a viable alternative to deep foundation to over-excavation and replacement. Also, Geopier is intermediate foundation of deep and shallow foundation. In this paper, the value of Geopier element stiffness modulus($K_g$) when designed is compared with the measured value($K_g$) by the in-situ modulus Load test in the field. Also, this paper presents a technology overview of system capabilities and application for foundation reinforcement of structures.