• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.439-446
• /
• 1998

This paper presents design of SD adder and PD adder on Multi-Valued Logic. For implementing of Multi-valued logic circuits we use Current-mode CMOS circuits and also use Voltage-mode CMOS circuits partially. The proposed arithmetic circuits was estimated by SPICE simulation. At the SD(Signed-Digit) number presentation applying Multi-Valued logic the carry propagation is always limited to one position to the left this number presentation allows fast parallel operation. The addition method that add M operands using PD( positive digit number) is effective not only for the realization of the high-speed compact arithmetic circuit, but also for the reduction of the interconnection in the VLSI processor. therefor, if we use PD number representation, the high speed processor can be implementation.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2702-2704
• /
• 2003

본 논문은 전력선통신시스템 (Power Line Communications)을 위한 초고속 오류정정 부호화기 회로에 관한 설계방법론과 회로의 동작속도, 회로복잡성과 레이턴시에 직접적으로 기여하는 핵심 GF (Galois Field) 연산기들의 역할 및 이들의 설계결과에 관해 설명한다. 특히, 이러한 설계방법에 충실한 오류정정 부호화기회로는 입출력 병렬구조의 세미-시스톨릭 (Semi-systolic) 아키텍처를 갖는 고속의 내부 핵심 GF 연산기회로들을 채택함으로써 고속 연산을 가능토록 한다. 최적화된 GF곱셈연산기를 기반으로 설계되어진 리드-솔로몬 (Reed-Solomon) 오류정정 부호화기는 전력선 채널상에서 데이터를 전송 시 발생되는 연집오류들을 효과적으로 복원하도록 하는 대표적인 부호화기로 이미 존재하는 다른 회로들에 비해 동작속도, 회로의 복잡성, 및 레이턴시 측면에서 그 성능이 월등히 뛰어나므로, 실제 초고속 전력선 통신시스템의 설계 및 구현 시 효과적으로 이용될 수 있다.

• Journal of KIISE:Information Networking
• /
• v.27 no.3
• /
• pp.331-338
• /
• 2000

온라인 화상회의, VOD 등의 멀티캐스트(multicast)특성을 갖는 서비스를 효율적으로 제공하기 위해서는 스위치 수준에서의 멀티캐스트 트래픽 처리를 위한 연구가 필요하다. ATM 스위치 증 입력 버퍼형은 하드웨어 구현 복잡도가 낮아 고속의 트래픽 처리와 대용량 스위치 구현에 적합한 반면, 높은 성능을 가지기 위해서는 임의접근(random access) 입력버퍼와 좋은 셀 스케쥴링 알고리즘이 필요하다. 본 논문에서는 입혁버퍼형 ATM 스위치에서의 멀티캐스트 셀 스케쥴링 알고리즘인 무충동 시간예약(CFTR)기법을 제안한다. CFTR 기법은 입력버퍼의 셀의 전송시점을 충돌이 없도록 예약함으로써 높은 처리율을 가질 수 있도록 하며, 이를 위해 입력단, 출력단 스케쥴러에 예약 테이블을 둔다. CFTR 기법은 각 출력 단 스케쥴러에서의 예약과정이 간단하고 독립적, 병렬적 수행이 가능하므로 고속 트래픽 처리에 적합하다. CFTR 기법의 성능평가를 위해 시뮬레이션을 통해 기존의 셀 스케쥴링 방식과 비교하며, 약간의 하드웨어 추가로 매우 좋은 성능을 보임을 알 수 있다.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.251-253
• /
• 2019

본 논문은 1.8kW (4.5kV, 450mA)출력의 마그네트론을 구동하기 위한 2.5kW (5kV, 0.5A) 고전압 DC 전원장치 설계에 대해 기술한다. 무선 전력 전송을 위한 위상배열 시스템에 이용되는 마그네트론의 경우 인가되는 전압의 리플 최소화는 필수적이다. 본 논문에서는 소프트 스위칭을 기반으로한 400kHz 이상의 스위칭 주파수로 컨버터를 설계함으로써 출력리플을 저감하고 필터성분을 최소화 하여 전력밀도를 높일 수 있도록 한다. 변압기의 누설인덕턴스 만을 이용하여 공진 인덕터를 구현하고 변압기의 기생 커패시터 성분과 직렬로 스택킹 된 출력 정류 다이오드의 전압 밸런싱을 위한 커패시터를 병렬 공진 커패시터로 활용한 LCC 공진형 컨버터 고밀도 설계에 대하여 기술한다. 또한, 공진전류의 Trapezoidal 해석 및 설계를 통해 도전 손실을 줄일 수 있는 LCC공진형 컨버터 기반의 마그네트론 구동전원 설계에 대하여 상세 기술하고 PSpice를 이용한 Simulation 및 실험 결과를 통하여 개발된 전원의 우수성을 검증한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.121-128
• /
• 2010

This paper presents a design of a 100 W high-efficiency power amplifier, whose operational frequency band expands from 30 to 512 MHz, using negative feedback network, push-pull structure, broadband RF choke, and transmission line transformer for balun configuration. The push-pull amplifier has been tuned for higher output power using a shunt capacitor as a matching component at its load especially for high-frequency region. The implemented power amplifier exhibited a very flat power gain of $18.34{\pm}0.9\;dB$ throughout the operating frequency band and very high power-added efficiency(PAE) of greater than 40% at an output power of 100 W. It also showed second- and third-harmonic distortion levels of below -34 dBc and -12 dBc, respectively, through the entire operating frequency band.

• Spatial Information Research
• /
• v.19 no.3
• /
• pp.95-106
• /
• 2011

Recently as efficient processing of aggregate queries for fetching desired data from sensors has been recognized as a crucial part, in-network aggregate query processing techniques are studied intensively in wireless sensor networks. Existing representative in-network aggregate query processing techniques propose routing algorithms and data structures for processing aggregate queries. However, these aggregate query processing techniques have problems such as high energy consumption in sensor nodes, low accuracy of query processing results, and long query processing time. In order to solve these problems and to enhance the efficiency of aggregate query processing in wireless sensor networks, this paper proposes Bucket-based Parallel Aggregation(BPA). BPA divides a query region into several cells according to the distribution of sensor nodes and builds a Quad-tree, and then processes aggregate queries in parallel for each cell region according to routing. And it sends data in duplicate by removing redundant data, which, in turn, enhances the accuracy of query processing results. Also, BPA uses a bucket-based data structure in aggregate query processing, and divides and conquers the bucket data structure adaptively according to the number of data in the bucket. In addition, BPA compresses data in order to reduce the size of data in the bucket and performs data transmission filtering when each sensor node sends data. Finally, in this paper, we prove its superiority through various experiments using sensor data.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.3 s.345
• /
• pp.59-67
• /
• 2006

OFDM (Orthogonal frequency Division Multiplexing) systems convert serial data stream to N parallel data streams and modulate them to N orthogonal subcarriers. Thus spectrum utilization efficiency of the OFDM systems are high and high-speed data transmission is possible. However, with the OFDM systems using the same modulation method at all subcarriers, the error probability is dominated by the subcarriers which experience deep fades. Therefore, in order to enhance the performance of the system adaptive modulation is required, with which the modulation methods of the subcarriers are determined according to the estimated SNRs. The IEEE 802.11a system selects various transmission speed between 6 and 54 Mbps according to the modulation mode. There are three typical methods for SNR estimation: Direct estimation method uses the frequency domain symbols to estimate SNR directly by minimizing MSE (Mean Square Error), EVM method utilizes the distance between the demodulated constellation points and received complex values, and the method utilizing the Viterbi algorithm uses the cumulative minimum distance in decoding process to estimate the SNR indirectly. Through comparison analyses of three methods we propose a new SNR estimation method, which employs both the EVM method and the Viterbi algorithm. Finally, we perform extensive computer simulations to confirm the performance improvement of the proposed adaptive OFDM systems on the basis of IEEE 802.11a.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1375-1382
• /
• 2008

Frequency adjustable D-CRLH(dual-composite right/left handed) transmission lines, which solve the problem of design complexity and uncontrolled frequency of the existing structures, are proposed in this paper. The first design(type I), consisting of defected ground structure(DGS), island pattern in DGS, fixed stub and varactor diodes, controls $C_L$ in the parallel resonant circuit, while the second structure(type 2) composed of fixed DGS, shunt stub and diode adjusts $C_R$ in the series resonant circuit. The dual band frequency points which correspond to the meaningful electrical length of +/-90 degree in the RH/LH region are adjustable according to the bias voltage. The measurement shows that the LH frequency point which has -90 degree of electrical length are adjusted over $4.22{\sim}5.39\;GHz$ and $4.21{\sim}5.05\;GHz$ for type 1 and type 2, respectively, under $1{\sim}12\;V$ of bias voltage. In addition, the frequency Woo where RH turns over LH is controled over $3.26{\sim}4.22\;GHz$ for type 2 with the same bias condition.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.699-712
• /
• 2014

In this paper, we propose a new Adaptive Search Range (ASR) decision algorithm for accelerating GPU-based Integer-pel Motion Estimation (IME) of High Efficiency Video Coding (HEVC). For deciding the ASR, we classify a frame into two models using Motion Vector Differences (MVDs) then adaptively decide the search ranges of each model. In order to apply the proposed algorithm to the GPU-based ME process, starting points of the ME are decided using only temporal Motion Vectors (MVs). The CPU decides the ASR as well as the starting points and transfers them to the GPU. Then, the GPU performs the integer-pel ME. The proposed algorithm reduces the total encoding time by 37.9% with BD-rate increase of 1.1% and yields 951.2 times faster ME against the CPU-based anchor. In addition, the proposed algorithm achieves the time reduction of 57.5% in the ME running time with the negligible coding loss of 0.6%, compared with the simple GPU-based ME without ASR decision.