• ETRI Journal
• /
• v.10 no.3
• /
• pp.101-112
• /
• 1988

본 연구에서는 과학계산용 병렬 컴퓨터 시스팀의 구조를 설계하고, 설계된 컴퓨터 구조의 소프트웨어 시뮬레이터를 개발하였으며, 여러가지 시뮬레이션을 통하여 시스팀의 성능을 분석하였다. 설계된 시스팀은 H/V-bus 병렬 처리 시스팀 아키텍쳐에 기반을 둔것으로 각종 과학계산을 위한 고속의 프로세서간 통신 메카니즘이 확장 설계되었다. SLAM II 및 FORTRAN을 이용하여 개발된 시뮬레이터는 시스팀 변수들을 이용하여 프로세서의 수와 속도 및 통신 메카니즘의 속도를 쉽게 변화시킬 수 있게하여 여러 조건하에서의 시스팀 성능을 분석하는데 사용되었다. 또한 실제 프로그램이 수행되는 상황에서 프로세서 및 통신 메카니즘의 속도가 시스팀 전체 성능에 미치는 영향을 측정하고 분석하기 위하여 벤치마크를 시뮬레이터를 이용하여 풀었다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.9
• /
• pp.158-166
• /
• 1998

This paper presents a geometrical approach to the characteristic analysis of parallel mechanism with free joints intended for use as a planar task robot. Solution of the forward and inverse kinematic problems are described. Because the mechanism has only three degree-of-freedom output, constraint equations must be generated to describe the inter-relationship between actuated joints and free joints so as to describe the position and orientation of the moving platform. Once these constraints are incorporated into the kinematics model, a constrained Jacobian matrix is obtained. and it is used for the solution of the forward kinematic equations by Newton-Raphson technique. Another Jacobian matrix was derived to describe the interrelationship between actuated joints and moving platform. The stiffness, velocity transmission ratio, force transmission ratio and dexterity of the mechanism are then determined based on this another Jacobian matrix. The geometrical construction of the mechanism for the best performance was investigated using the characteristic analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.134-142
• /
• 1997

In this study, we proposed the wire parallel mechanism that can be used to measure a full pose of a robot. It is composed of six parallel links using wire. The position and orientation of the end effectorf of a robot are calculated using the length of wires which is measured by the encoder. The complex non- linear equations of the forward kinematics are solved by using a numerical method, and the unique solution is obtained from the geometric configuration of the device. The length error of the wire which occurs in static condition is compensated by the relational equation that considered longitudinal extension and defoection of the wire. Through this work, we known that the proposed device has a good accuracy( .+-. 0.01mm) in a large measuring region, so it can be used effectively in a callibration of a robot which required a low cost.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.531-534
• /
• 1996

In this work, we investigate the characteristics of output compliance matrix of a planar 3 degree-of-freedom parallel mechanism when joint compliances are attached to the mechanism redundantly. It is shown by simulation that by attaching redundant joint compliances symmetrically to the mechanism, the translational and rotational compliances can be arbitrarily modulated within some ranges. This property could be effectively used in the control of the compliance characteristics of actively adjustable RCC devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.718-721
• /
• 1996

In this work, an effective stiffness generated by internal loading for a planar 3 degrees of freedom RCC mechanism is investigated. For this purpose, the internal kinematic analysis and antagonistic stiffness modeling for this mechanism are performed. It is shown that the antagonistic stiffness could be effectively created at the center of the mechanism in its symmetric configuration.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.2
• /
• pp.196-208
• /
• 1999

본 논문에서는 시뮬레이션 속도 향상을 위하여 VHDL(Very high speed integrated circuit Hardware Description Language)로 기술된 디지털 회로 시뮬레이션을 위한 병렬 분산 VHDL 시뮬레이터(Parallel Distributed VHDL Simulator : PDVS)를 개발한다. 개발된 프로그램을 대규모 병렬 프로그래밍 환경에서도 수행될 수 있도록 하기 위해서 표준 통신 라이브러리인 MPI(Message Passing Interface)를 이용하여 구현된다. PDVS 의 전체적인 시스템구성도, PDVS 에 사용된 시뮬레이션 프로토콜, 전역가상시간 계산 메카니즘 및 논리적 프로세스의 내부 구성요소들간의 관계와 PDVS의 제어 흐름도를 제시한다. 그리고 본 연구에서는 병렬 분산 시뮬레이션의 병렬성 정도를 분석하기 위하여 디지털 회로의 크기 변화와 처리되는 사건수(grain size)의 변화에 따른 성능 결과를 제시한다. 이 연구에서 4배크기의 디지털 회로를 적용한 경우는 프로세서를 12개 사용할 때에 8배의 속도향상을 얻었다. 그리고 처리되는 사건의 수가 200인 경우는 프로세서를 32개 사용할 때에 12배의 속도향상을 얻었다. 또한 동일한 방법을 SGI Origin 2000, Cray T3e 및 IBM SP2에 적용함으로서 그 성능의 간접적인 비교결과도 제시한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.6
• /
• pp.683-693
• /
• 2010

In this paper, we propose a new parallel mechanism for the legs of biped robots and the control of the robot's locomotion. A leg consists of two 3-DOF parallel platforms linked serially: one is an orientation platform for a thigh and the other is the 3-DOF asymmetric parallel platform for the shank. The desired locomotion trajectory is generated on the basis of the Gravity-Compensated Inverted Pendulum Mode (GCIPM) in the sagittal direction and the Linear Inverted Pendulum Mode (LIPM) in the lateral direction, respectively. In order to simulate the ground reaction force, a 6-DOF elastic pad model is used underneath each of the soles. The performance and effectiveness of the proposed parallel mechanism and locomotion control are shown by the results of computer simulations of a 12-DOF parallel biped robot using $SimMechanics^{(R)}$.

• Applied Chemistry for Engineering
• /
• v.2 no.2
• /
• pp.155-164
• /
• 1991

The reaction mechanism and the effects of the oxidation state of vanadium oxide and of support on catalytic activity for the oxidation of o-xylene were investigated. The oxidation of o-xylene simultaneously proceeded through the consecutive and parallel mechanisms. The high valence of vanadium favored selective oxidation to phthalic anhydride, while the low valence caused complete oxidation of phthalic anhydride to CO and $CO_2$. Crystalline $V_2O_5$ showed better selectivity for partial oxidation rather than amorphous one.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.12
• /
• pp.2146-2155
• /
• 1997

This paper presents the Wire Parallel Mechanism for robot pose measurement which can be used to robot calibration. It is constructed with six parallel links using wire. The position and orientation of the end effector of a robot are calculated from the wire length that measured by the encoder. The unique solution is obtained from a Newton-Raphson method and geometric configuration of the mechanism, also the method to estimate a measuring space is presented. Through the simulations, it is verified that the proposed mechanism can measure a robot pose, and has a large measuring space. In conclusion, it can be used effectively in a robot pose measurement with little cost and effort.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.18-23
• /
• 2009

구면무단변속기(SS-CVT)는 구조가 간단하여 변속기구의 부피와 무게를 기존의 변속기구에 비하여 줄일 수 있으며, 별도의 클러치 없이 출력축의 정회전, 역회전 그리고 중립상태 등을 구현할 수 있다. 본 연구에서는 이러한 구면무단변속기의 기구적 특징과 변속메카니즘을 이용하여 직류모터와 가솔린엔진을 장착한 병렬형 하이브리드차량의 동력전달계를 제안하고자 한다. 이를 위하여 먼저 구면무단변속기의 작동원리에 대해 설명하고 전용 실험장치를 제작하여 무단변속성능을 검증하였다. 또한 직류모터를 보조 동력원으로 사용하는 병렬형 하이브리드차량 동력전달계의 설계를 위해 연결기어비와 구면무단변속기의 변속비를 차량주행성능에 맞추어 설정하였으며, 이를 차량가속성능의 수치 시뮬레이션을 통하여 분석하였다. 시뮬레이션 결과를 바탕으로 구면무단변속기의 하이브리드차량 동력전달계의 적용가능성을 검증하였으며, 연구결과로 선정된 구성요소의 설계파라미터를 이용하여 시작차량을 제작하였다.