• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.3
• /
• pp.351-360
• /
• 1996

This study focuses on the development and evaluation of the high efficiency absorption chiller-heater, which can be applied to a direct gas fired, double effect system with 40RT (508,000kJ) cooling capacity. The performance of the absorption chiller-heater is investigated through cycle simulation and experiment to obtain the system characteristics with the inlet tenperature of cooling, chilled water, and gas input flow rate. The efficiency of the different cycles has been studied and the simulation and experiment results show that higher coefficient of performance could be obtained for mixed flow cycle. The five percent difference was obtained from the comparison between experimental and cycle simulation results. As a result of this study, the optimum designs were determined based on the operating conditions and the coefficient of performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.2
• /
• pp.288-298
• /
• 1996

The gas-fired absorption refrigeration system to utilize treated sewage is available for environmental protection and energy conservation. Simulation analysis on the double-effect absorption refrigeration cycles with parallel or series flow type has been performed. The working fluid is Lithium Bromide and water solution. The main purpose of this study is evaluating the possibilities of effective utilization of treated sewage as a cooling water for the absorber and condenser. The efficiency of a couple of cycles has been studied and simulation results show that higher coefficient of performance could be obtained for parallel flow type. The other purpose of the present study is to determine the optimum designs and operating conditions based on the operating constraints and the coefficent of performance in the paralledl flow type.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2099-2109
• /
• 1993

A gas-fired 4RT absorption heat pump was designed as an air-conditioner for domestic use during the summer. The absorption heat pump is air-cooled. double-effect, $LiBr-H_{2}O$ system with parallel flow type. The performance of the absorption heat pump in the cooling mode of operation was investigated through cycle modeling and simulation to obtain the system characteristics with parameter changes. System parameters considered in this analysis were the inlet temperature of cooling air to the absorber, the working solution concentrations, the ratio of the amount of the weak solution from the absorber, and the LTD's of each heat exchange component. The optimum designs and operating conditions were determined based on the operating constraints and the coefficient of performance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.2
• /
• pp.272-280
• /
• 1999

A cycle analysis was achieved to predict the characteristics by comprehensive modeling and simulation of an air-cooled, double-effect absorption system using a new $H_2O/LiBr+HO(CH_2)_3OH$ solution. The simulation results showed that the new working fluid may provide the crystallization limit 8% higher than the conventional $H_2O/LiBr$ solution. With a crystallization margin of 3wt%(weight%), the optimal solution distribution ratio was found in the range of 36 to 40%. Variation of cooling air Inlet temperature has a sensitive effect on the cooling COP and corrosion problem. The simulation of heat exchangers with UA value revealed that the absorber and the evaporator are relatively important for an air-cooled system compared with the condenser and the low temperature generator. The effect of cooling air flow rate, circulation weak solution flow rate and chilled water inlet temperature were also examined. The new working fluid may provide the COP approximately 5% higher than the conventional $H_2O/LiBr$ solution.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.636-638
• /
• 2000

제어 독립성(Control Independence)은 슈퍼스칼라 프로세서에서 명령어 수준 병렬성(Instruction-Level Parallelism)을 향상시키기 위한 중요한 요소로 작용하고 있다. 분기 예상기법(Branch Prediction Mechanism)에서 잘못 예상될 경우에는 예상한 분기 방향의 명령어들을 제거하고 올바른 분기 방향의 명령어들을 다시 반입하여 수행해야 한다. 본 논문에서는 컴파일 시 프로파일링을 통한 정적인 방법과 프로그램상의 제어 흐름을 통해 동적으로 제어 독립적인 명령어를 탐지함으로써 분기 명령어의 잘못된 예상으로 인해 제거되는 명령어를 효과적으로 감소시켜 프로세서의 성능을 향상시키는 메커니즘을 제안한다. SPECint95 벤치마크 프로그램에 대해 기존의 방법과 본 논문에서 제안한 방법 사이의 사이클 당 수행된 명령어 수를 분석한 결과, 4-width 프로세서에서 4%~6%, 8-width 프로세서에서 11%~18%, 16-width 프로세서에서 15%~17%의 성능 향상을 보이고 있다.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.4
• /
• pp.19-26
• /
• 2007

This paper concerns the study of absorption refrigeration and heat pump cycle to use sewage. Simulation analysis on the double-effect absorption refrigeration cycle with parallel and two-stage heat pump cycle has been performed. The working fluid is Lithium Bromide and water solution. The absorption refrigeration cycle use sewage as a cooling water for the absorber and condenser, and absorption refrigeration cycle does that as a chilled water for the evaporator of the first stage cycle. And the two-stage cycle consists of coupling double-effect with parallel and single effect cycle so that the first stage absorber and condenser produces heating water to evaporate refrigerant in the evaporator of the second stage. The effects of operating variables such as a absorber temperature on the coefficient of performance have been studied for absorption refrigeration and heat pump cycle.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.7
• /
• pp.401-410
• /
• 2002

Control independence has been put forward as a new significant source of instruction-level parallelism for superscalar processors. In branch prediction mechanisms, all instructions after a mispredicted branch have to be squashed and then instructions of a correct path have to be re-fetched and re-executed. This paper presents a new branch misprediction recovery mechanism to reduce the number of instructions squashed on a misprediction. Detection of control independent instructions is accomplished with the help of the static method using a profiling and the dynamic method using a control flow of program sequences. We show that the suggested branch misprediction recovery mechanism improves the performance by 2~7% on a 4-issue processor, by 4~15% on an 8-issue processor and by 8~28% on a 16-issue processor.

• Journal of KIISE:Databases
• /
• v.32 no.6
• /
• pp.603-615
• /
• 2005

As recent business environments are changed and become complex, a more efficient and effective business process management are needed. This paper proposes a new approach to the automatic execution of business processes using Event-Condition-Action (ECA) rules that can be automatically triggered by an active database. First of all, we propose the concept of blocks that can classify process flows into several patterns. A block is a minimal unit that can specify the behaviors represented in a process model. An algorithm is developed to detect blocks from a process definition network and transform it into a hierarchical tree model. The behaviors in each block type are modeled using ACTA formalism. This provides a theoretical basis from which ECA rules are identified. The proposed ECA rule-based approach shows that it is possible to execute the workflow using the active capability of database without users' intervention.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.3-22
• /
• 2012

Control independence has been put forward as a significant new source of instruction-level parallelism for superscalar processors. In branch prediction mechanisms, all instructions after a mispredicted branch have to be squashed and then instructions of a correct path have to be re-fetched and re-executed. This paper presents a new branch misprediction recovery mechanism to reduce the number of instructions squashed on a misprediction. Detection of control independent instructions is accomplished with the help of the static method using a profiling and the dynamic method using a control flow of program sequences. We show that the suggested branch misprediction recovery mechanism improves the performance by 2~7% on a 4-issue processor, by 4~15% on an 8-issue processor and by 8~28% on a 16-issue processor.