• Journal of the Korea Society for Simulation
• /
• v.24 no.3
• /
• pp.37-44
• /
• 2015

A queueing system with 2 parallel workstations is common in the field. Typically, the workstations have different features in terms of the inter arrival times of customers and the service times for the customers. Computer simulation study on the optimal server allocation for parallel heterogeneous queueing systems with fixed number of identical servers is presented in this paper. The queueing system is optimized with respect to minimizing the weighted system time of the customers served by 2 parallel workstations. The system time formula for the M/M/c systems in Kendall's notation is known. Thus, we first compute the optimal allocation for parallel M/M/c systems, comparing the results with those from the computer simulation experiments, and have the same results. The CETI rule is devised through optimizing M/M/c cases, which allocates the servers based on Close or Equal Traffic Intensities between workstations. Traffic intensity is defined as the arrival rate divided by the service rate times the number of servers. The CETI rule is shown to work for M/G/c, G/M/c queueing systems by numerous computer simulation experiments, even if the rule cannot be proven analytically. However, the CETI rule is shown not to work for some of G/G/c systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.1
• /
• pp.111-116
• /
• 2019

Recently, GPU expands application domains from graphic processing to various kinds of parallel workloads. However, current GPU systems focus on the maximization of each workload's parallelism through simplified control rather than considering various workload characteristics. This paper classifies the resource usage characteristics of GPU workloads into computing-bound, memory-bound, and dependency-latency-bound, and quantifies the fine-grained bottleneck for efficient workload allocation. For example, we identify the exact bottleneck resources such as single function unit, double function unit, or special function unit even for the same computing-bound workloads. Our analysis implies that workloads can be allocated together if fine-grained bottleneck resources are different even for the same computing-bound workloads, which can eventually contribute to efficient workload allocation in GPU.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.1
• /
• pp.52-60
• /
• 2019

In this study, the performance and structure of a parallel ejector comprised of multiple single ejectors were confirmed through numerical analysis. The same design variables (mass suction ratio, compression ratio, and expansion ratio) relevant to the performance of a single ejector were considered in the design of the parallel ejector. Analytical results showed that there was no significant difference in the performance of either system related to the operating mass suction ratio; however, the systemsize was significantly reduced. In addition, it was confirmed that when ejectors of the same performance capacity are arranged in parallel, the combined mass suction ratio is lower than that of the single ejector, allowing a lower pressure to be realized. The results of the analysis indicated that the parallel ejector's performance is not significantly different from that of any single ejector, but confirmed that the parallel ejector can offer a configurationdependent advantage in size and operation.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.521-523
• /
• 2007

기존의 PCS는 저 출력에서 효율과 전력 품질이 낮은 단점을 가지고 있다. 이로 인하여 발전 사업자용 태양광 발전 인버터로 사용 시 전력 생산량이 떨어지게 된다. 이를 개선하기 위해서, 한 대의 단일 PCS 내에서 두 대의 인버터 스택을 적용, 개별/병렬 운전하여 효율과 전력품질을 향상시키고자 하며, 향후 500kW급 인버터 개발에 기초 기술개발을 위하여 본 논문에서는 50kW급 계통 연계형 병렬 운전 PCS를 개발하였다.

• Journal of the Korean Institute of Educational Facilities
• /
• v.8 no.1
• /
• pp.5-14
• /
• 2001

The purpose of this study is to clarify the block type of school buildings based on present conditions, by picking up elementary school buildings of Chungbuk Province in Korea. The summary of the block types can be given below. 1) Elementary school buildings(495) in Chungbuk Province are almost built in an average block of 1.7school(290). 2) The block types of school buildings are classified with "-", "ㄱ", "ㄷ", and parallel type. There are many "-" types over and parallel types in the second place of them. 3) The "-" block types are uniformly distributed with 166 elementary schools, below 6 classroom, 7through 24classrooms, beyond 25 classrooms. The "ㄱ" block types are 8 schools, and built as the wing of "-" block type in a limited space. The parallel types are classified with 2 3 lines according to the numbers of paralleled school buildings. The 2 parallel types are firstly represented with more than 95 classrooms, and 5 schools of "ㄷ" types, built as the wing of 2 parallel types, are only represented over 25 classrooms. The 3 parallel types are only 16 schools of all. They are uniformly seen in old and new school buildings.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1049-1061
• /
• 2013

In this paper, a relative heat exchange rate is numerically compared for cast-in-place concrete energy piles with different heat exchange pipe configurations, and a new design method for energy piles is proposed. An equivalent heat exchange rate was estimated for the W-type (one series loop), multiple U-type (four parallel loops), and coil-type heat exchanger installed in the same large-diameter drilled shaft. In order to simulate a cooling operation in summer by a CFD analysis, the LWT (leaving water temperature) into a energy pile was fixed at $35^{\circ}C$ and then the EWT (entering water temperature) into a heat pump was monitored. In case of continuously applying the artificial maximum cooling load for 100 hours, all of the three types of heat exchangers show the marginally similar heat exchange rate. However, in case of intermittently applying the cooling load with a cycle of 8 hours operation-16 hours off for 7 consecutive days, the coil type heat exchanger exhibits a heat exchange rate only 86 % of the multiple U-type due to measurable thermal interference between pipe loops in the energy pile. On the other hand, the W-type possesses the similar heat exchange rate to the multiple U-type. The equivalent heat exchange rates for each configuration of heat exchangers obtained from the CFD analysis were adopted for implementing the commercial design program (PILESIM2). Finally, a design method for cast-in-place concrete energy piles is proposed along with a design chart in consideration of typical design factors.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.345-350
• /
• 2019

This study deals with the design of a modular converter that can convert the output voltage according to the size of the load. The efficiency of the converter depends on the size of the load and is generally less efficient for lower loads. Therefore, it is more efficient to construct a small capacity modular converter than to manufacture a large capacity converter and it determines the capacity of the system through the parallel connection of the converter module according to the load size. In this paper, we will introduce a modular DC / DC converter designed to control the number of modules according to the load. A programmable resistor is placed at the output of the module for parallel connection of the module, and the voltage is regulated by adjusting the variable resistor. A system controlled in this way was found to exhibit an efficiency improvement of about 32%.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.108-108
• /
• 2016

마그네트론 스퍼터링은 박막의 증착에 널리 사용되는 기술로 음극의 설계가 핵심적이다. 영구 자석과 전자석을 겸용하는 경우도 있고 고주파 코일을 추가하여 2차 플라즈마 발생을 유도하여 공정의 유연성을 한층 높인 방법도 오랫동안 사용되어 왔다. 전자의 자기장 하에서의 운동은 Lorentz force를 적분하여 예측할 수 있으며 가장 중요한 전자 - 중성간의 충돌 과정인 탄성 충돌, 여기 충돌, 이온화 충돌을 고려하면 보다 실질적인 마그네트론 플라즈마의 거동을 이해하고 그 결과를 기반으로 자석 배치를 설계할 수 있다. PIC (particle-in-cell) code를 이용하면 플라즈마 내의 전자기장 효과를 상세히 검증해볼 수 있지만 계산 시간의 부담 때문에 고성능 병렬 컴퓨터를 사용하여야 한다. 그 이유는 하전입자(전자, 이온)의 공간적인 분포에 변화가 발생하면 전위가 영향을 받고 전자의 가속이 발생하는 쉬스(sheath)의 두께가 따라서 변화하기 때문이다. 여기서 계산 시간의 단축을 위한 가정, 즉, 쉬스의 두께가 일정하다는 사실을 적용하면 계산시간을 획기적으로 단축 시킬 수 있으며 병렬 계산의 효율성도 향상시킬 수 있다. 본 연구에서는 이와 같은 원리에 입각한 코드를 개발하고 평판 디스플레이용 사각형 음극에 대해서 적용했던 경험을 바탕으로 원형의 스캔형 마그네트론 음극 구조의 이해와 설계에 적용하고자 코드를 개발하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.81-86
• /
• 2019

This paper is concerned with a system design that enables a the plurality of switching mode power supplies to be supplied with larger power through a parallel connection. For this purpose, a shunt resistor is placed in series at the output of the constant voltage regulator and the output voltage is sensed and controlled using an arduino. In this paper, two constant-voltage regulators were used for the experiment, but it is possible to generalize for more boards. By using the method that controls the system, the sum of the currents delivered by the two systems to the load was found to be 96% of the current drawn from each board. In case of efficiency, 92.4% efficiency is achieved in the unit board and the efficiency in parallel connection is about 90%.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.67-69
• /
• 2020

본 논문은 평면 변압기에서 발생하는 공통모드 노이즈를 제거하기 위해 새로운 회로 구조 및 변압기의 와인딩 레이아웃을 제안한다. 제안하는 컨버터는 1차측의 병렬구조로 인하여 풀-브리지와 같은 구조를 갖고 있고, 높은 파워의 어플리케이션에 적합하게 사용되어질 수 있다. 2개의 하프-브리지 LLC 공진형 컨버터 변압기의 1차측은 한쪽 끝이 정전압 전위를 갖도록 연결되어 있다. 이에 따라 같은 dv/dt 특성을 갖는 1차측과 2차측 와인딩이 존재하게 되고, 이러한 와인딩을 인접하게 배치하는 구조를 통해 변압기에서 발생하는 공통모드 노이즈를 크게 줄일 수 있다. 최종적으로 EMI 필터의 크기를 크게 줄일 수 있고, 높은 전력밀도를 달성할 수 있다.