• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.619-621
• /
• 2005

햅틱 장치를 이용한 변형체의 실시간 시뮬레이션은 가상현실을 구축하기 위한 중요한 기술의 하나로서 최근에 크게 각광받고 있다. 본 연구에서는 햅틱 장비와 변형체의 정확한 인터페이스를 구축하기 위하여 변형체의 물리적 특성을 고려한 연속체적 모델인 유한요소법을 통한 선행해석을 수행한다. 변형체와 햅틱 장치의 상호작용 과정에서 발생하는 변형과 반력을 사용자에게 실시간으로 제공하기 위하여 선행해석 결과를 이용한 변형체의 정적 시뮬레이션을 구현한다. 이와 함께 햅틱 장치와 접촉이 이루어지는 부분의 변형을 보다 자연스럽게 표현하기 위하여 적응적 유한요소법인 s-adaptive 방법을 적용하였으며 햅틱 장치와 접촉이 끝난 후의 변형체가 평형 상태로 돌아가는 과정을 모사하기 위하여 Newmark scheme을 통한 동적 시뮬레이션을 구현한다. 또한 최적화 행렬 연산 함수인 BLAS와 LAPACK을 이용하여 행렬 연산을 빠르게 수행하고 효율적인 메모리 사용 추구한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.3
• /
• pp.305-319
• /
• 2000

Numerical solution lot frictional contact problems of nonlinearly deformable bodies having large deformation is presented. The contact conditions on the possible contact points are expressed by using the contact error vector, and the iterative scheme is used to reduce the contact error vector monotonically toward zero. At each iteration the solution consists of two steps : The first step is to revise the contact force by using the contact error vector given by the previous geometry, and the second step is to compute the displacement and the contact error vector by solving the equilibrium equation with the contact force given at the first step. Convergence of the iterative scheme to the correct solution is analyzed, and the numerical simulations we performed with a rigid-plastic membrane and a nonlinear elastic beam.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.215-224
• /
• 1998

In this study, total strain was measured by LVDTs and local strains on the surface of specimens were measured by strain gauges. And axi-symmetrically elastoplastic FEM analyses was carried out for cylindrical specimens. Considering the influence of the restraint induced by the loading platen, in the case of H/D=1, the strain distribution on the side of a specimen is obviously affected by the condition of platen contact. Furthermore, it is clear that the larger H/D ratio becomes, the smaller the influence to the strain distribution is. For the smooth contact condition, the strain on the side is not influenced by the stiffness of the specimen, the shape and the scale effect, the strain distribution coincides with the nominal total strain. Whereas, in the case of rough contact condition, the strain distribution is remarkably affected. It is made clear that strain responses of hard rock specimens may more sensitive than these of soft rock specimens as a results of interaction between loading platens and specimen and the uniaxial strength of specimens may strongly depends on this interaction and stress-strain relation is affected by the contact condition.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.261-266
• /
• 1998

손끝으로 물건을 문지르거나 잡아 질감을 느끼는 경우 나타나는 현상을 Hertzian 접촉이론을 응용하여 수학적인 모델링을 하였다. 물체표면에 손끝이 접촉하여 눌려지게되면 변형이 일어나게 되고 변형된 모양과 정도에 따라 촉감을 느끼게 .된다. 손끝은 점탄성체로서 누르는 변위에 따라 탄성계수와 점성계수 값이 비선형으로 변하게 되는 현상을 이론과 실험을 통하여 연구하였다. 특히 손끝이 직물을 누를 때 나타나는 현상을 측정하여 질감표현과의 관계를 분석하였다.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2011.09a
• /
• pp.153-157
• /
• 2011

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.82-85
• /
• 1999

Permanent magnets of Nd-Fe-B group have kept a key post in the permanent magnet market and used in various parts. Tube Process is a process to produce permanent magnets using a deformable tube for denslfication of powder magnets. Advantage claimed for this process is that it can accomplish both densification and anisotropication in one step forming. In this paper. the simulation has been carried out for a full Tube Process in a closed Qe considering the compressibility of material, arbitrary curved shape and deformable body contact between Nd-Fe-B powder magnet and copper tube. The results show that the analysis of Tube Process is applicable with great help in the stage of preform design.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.49-54
• /
• 2010

Fretting wear behavior under elastic deformable contacts was experimentally examined by using a simulated dual cooled fuel rod and its supporting structure. As this fuel rod has larger outer diameter than the typical solid rod to accommodate sufficient internal flow, new supporting structure geometries should be designed and their reliabilities (i.e. vibration characteristics, fretting wear resistance, etc.) are also examined with both analytical and experimental methods. In this study, the supporting structure characteristics and fretting wear behaviors are analyzed and examined by using one of the supporting structure candidates which has an embossing shape. The supporting structure characteristics were examined by using a specially designed test rig and their results were compared with that of analytical method. Based on the test results, the relationship between the supporting structure characteristics and their fretting wear behaviors was discussed in detail.

• Journal of Korea Game Society
• /
• v.19 no.1
• /
• pp.5-14
• /
• 2019

This paper presents a practical method to compute the closest approach distance of two ellipsoids in their inter-center direction. This is the key technique for collision handling in the dynamic simulation of rigid and deformable bodies approximated with ellipsoids. We formulate a set of equations with the inter-center distance and the contact point and normal for the two ellipsoids contacting each other externally. The equations are solved using fixed-point iteration and Aitken's delta-squared process. In addition, we introduce a novel stopping criterion expressed in terms of the error in distance. We demonstrate the efficiency and practicality of our method in various experiments.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1986.11a
• /
• pp.47-51
• /
• 1986

로울러 베어링의 로울러는 길이방향으로 적당하게 Profiling하여 양단부에서 발생하는 응력집중을 줄이고 있다. 로울러와 레이스간의 접촉을 단순한 탄성접촉문제로 해석하는 경우에는 유막의 개념이 없어서 로울러와 레이스 사이의 압력분포와 유막형상을 정확하게 나타내기가 어려우므로 탄성변형과 압력에 따른 윤활유의 점도 변화를 고려한 탄성유체윤활(EHL)해석이 필요하다. 대부분의 해석은 무한장 로울러로 취급하는 것이 보통이며 실제의 로울러에 해당하는 유한한 길이의 선접촉 EHL 해석은 Mostofi & Gohar 및 Kuroda & Arai의 해석 정도이나 각각은 수렴하중이 작거나 로울러의 길이가 아주 짧은 경우에 해당한다. 본 연구에서는 FDM과 Newton-Raphson method를 이용하여 길이가 유한한 실제 크기의 Profiled 로울러에 대한 EHL상태에서의 압력분포와 유막형상을 보다 하중이 온 경우에 대해서 구하고자 한다.

• Tribology and Lubricants
• /
• v.24 no.2
• /
• pp.90-95
• /
• 2008

An elastic-plastic contact analysis is developed using a semi-analytical method. The elastic contact is solved within a Hertz theorem. The reciprocal theorem with initial strains is then introduced, to express the surface geometry as a function of contact stress and plastic strains. The irreversible nature of plasticity leads to an incremental formulation of the elastic-plastic contact problem, and an algorithm to solve this problem is set up. Closed form expression, which give residual stresses and surface displacements from plastic strains, are obtained by integration of the reciprocal theorem. The distribution of contact stress, residual stress and plastic strain are obtained by the changed surface geometry.