• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3670-3676
• /
• 2011

A cell animation is represented by one background cell, and there is much difference of images when its shot is changed. Also, it does not have a lot of colors since people themselves draw it. In order to effectively detect shot transitions of cell animations while fully considering their intrinsic characteristics, in this paper, we propose a animation shot boundary detection algorithm that utilizes color and block-based histograms step by step. The suggested algorithm first converts RGB color space into HSI color one, and coarsely decides if adjacent frames contains a shot transition by performing color difference operation between two images. If they are considered to have a shot transition candidate, we calculate color histograms for 9 sub-regions of the adjacent images and apply weights to them. Finally, we determine whether there is a real shot transition by analyzing the weighted sum of histogram values. In experiments, we show that our method is superior to others.

• Tunnel and Underground Space
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2008

Acoustic emission (AE) and Microseimsic (MS) activities are law-energy seismic events associated with a sudden inelastic deformation such as the sudden movement of existing fractures, the generation of new fractures or the propagation of fractures. These events rapidly increase before major failure and happen within a given rock volume and radiate detectable seismic waves. The main difference between AE and MS signals is that the seismic motion frequencies of AE signals are higher than those of MS signals. As the failure of geotechnical structures usually happens as a high velocity and small displacement, it is nat easy ta determine the precursor and initiation stress level of failure in displacement detection method. To overcame this problem, AE/MS techniques far detection of structure failure and damage have recently adapt in civil engineering. This study deal with the basic theory of AE/MS and state of arts in monitoring technique using AE/MS.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.10
• /
• pp.659-665
• /
• 2017

When an electrically conducting fluid flows through a staggered tube bank, the heat transfer and fluid flow features are changed by the externally introduced magnetic field. This study provides a numerical investigation of this phenomenon. Heat and fluid flows are investigated for unsteady laminar flows at Reynolds numbers of 50 and 100 with the Hartmann number gradually increasing from zero to 100. As the Hartmann number increases, and owing to the effects of the introduced magnetic field, the velocity boundary layer near the tube wall is thinned, the flow separation is delayed downstream, and the shrinkage of a recirculation zone formed near the rear side is observed. Based on these thermo-fluid deformations, the resulting changes in the local and average Nusselt number are investigated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.4
• /
• pp.189-196
• /
• 1999

In order to verify a numerical model for the calculation of wave motion around an offshore barrier in shallow water, laboratory physical experiments are necessary. In this study, sample experiments are carried out on the wave and wave induced current fields due to a sloping bottom topography and on that due to an isolated structure from the coastline. The water body is divided into 4 levels, in which the current tracking floaters are deployed to measure the wave induced currents. Data measurement was continued using the limited wave gauges and current tracking floaters including a video camera from the top. The wave heights for the preselected surface and time-averaged velocity distributions at each level were measured in detail. The distribution of wave and current fields was analyzed precisely combining the whole measured laboratory data. Moreover, comprehensive analyses were carried out on non-linearity of wave transformation in terms of skewness and atiltness.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.86-86
• /
• 2012

고속방사소재는 연신공정이 없이 6,000m/min이상의 고속방사공정만이 있으므로 원가절감이 되고, 빠른 냉각, 높은 변형속도 등으로 섬유의 결정화도, 분자와 결정의 배향 및 모폴로지(morphology) 변화 등의 기계적 및 섬유상의 특성이 종래의 원사와는 다르게 된다. 방사속도가 증가함에 따라 배향도가 증가하면서 결정영역 또한 증가한다. 또한 기존 연신사에 비해 큰 결정크기를 갖는데 방사속도에 에 따른 방사응력의 증가가 응력유도 결정화도를 유발하여 결정크기 및 결정화도를 증가시키고,따라서 고분자의 용융점도를 고온측으로 이동시키는 현상을 나타내게 한다. 즉, 고속방사에 있어서는 연신에 필요한 임계응력 이상의 과도한 응력이 가해짐으로 인해 결정구조가 일반 연신사에 비해 현저히 발달한다는 것을 알 수 있다. 고속방사 원사를 통일한 조건으로 염색하는 경우 기존의 연신사보다 염착량이 많아 농색으로 염색이 가능하고 염착속도도 빠른 특징을 갖는 데이는 고속방사 원사의 비결정 배향이 낮고 느슨한 구조를 갖기 때문에 염료의 침투가 용이한 것으로 해석되고 있다. PET 섬유는 방사 후 형태안정성을 부여하기 위해서 염색 전처리 공정에서 열을 가하게 된다. 이런 과정에서 섬유의 미세구조가 변하게 되는데,특히 고속방사의 경우 섬유 형성과정이 연신사와는 다르므로 열에 의한 구조 변화와 이에 따른 염색성 변화에 대해 검토해 보는 것은 고속방사의 응용면에서 꼭 필요하다. 본 연구에서는 고속방사소재의 가장 단점인 잔류신도, 저수축현상, stiff감을 보완하면서 고속방사소재의 장점인 심색성을 부각시켜 차별화된 복합사 제조기술을 개발하기 위해 그 기술개발이 기초 연구로서 일반 일반 DTY사와 고속방사소재인 HOY사를 이용한 DTY사의 물성 및 염색 특성을 비교분석 하고자 한다.

• Journal of Astronomy and Space Sciences
• /
• v.12 no.2
• /
• pp.234-243
• /
• 1995

Korea's third rocket, which is currently under development for launch in 1997, is expected to reach as high as 160km and thus, it will provide a good opportunity for the direct measurement of the plasmas in the E-region ionosphere of the Korean peninsula. Langmuir probe techniques, which are the basic tools of the plasma experiment, may yield inaccurate results if they are applied in the conventional form as they are used in the laboratory experiments because of the contamination. In the present paper we study the contamination problem by performing the ground experiments in the vacuum chamber using the contaminated probe. The result show that the contamination effect is reduced when the plasma density is low or when the frequency of the sweep voltage is fast. We propose a modified Langmuir probe based upon our experiments which is suitable for the rocket experiments.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.3
• /
• pp.197-207
• /
• 2005

Design analysis for underground spaces requires evaluating stability related to heading collapses. A failure mode is one of the critical factors in the conventional methods of stability evaluation. Identification of failure modes is, therefore, essential in securing safe construction. In this study failure modes at the tunnel heading in cohesionless soils are investigated using physical model tests for various tunnel depths and ground surface inclinations. Test results showed that the effect of depth and the inclination of ground surface on a failure mode are of significance. It is identified that, with an increase in depth, failure modes become localized in a region close to tunnel face. It is also known that an increase in the inclination of ground surface results in inclined an d wide failure modes. Numerical simulation of laboratory tests was performed, and shown that the numerical analysis is useful in identifying the heading failure modes, particularly for large underground spaces.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.167-176
• /
• 2009

Traditional cluster-based routing method is a representative method for increasing the energy efficiencies. In these cluster-based routing methods, the selected cluster head collect/aggregate the information and send the aggregated information to the base station. But they have to solve the unnecessary energy dissipation of frequent information exchange between the cluster head and whole member nodes in cluster. In this paper, we minimize the frequency of the information exchange for reducing the unnecessary transmit/receive frequencies as calculate the overlapped area or number of overlapped member nodes between the selected cluster head and previous cluster head in the setup phase. So, we propose the modified cluster selection protocol method that optimizes the energy dissipation in the setup phase and reuses the saved energy in the steady-state phase efficiently that prolongs the whole wireless sensor network lifetime by uniformly selecting the cluster head.

• Journal of KIISE:Software and Applications
• /
• v.37 no.9
• /
• pp.706-711
• /
• 2010

In the applications of a human speech interface, reducing the error rate in recognition is the one of the main research issues. Many previous studies attempted to correct errors using post-processing, which is dependent on a manually constructed corpus and correction patterns. We propose an automatically learnable post-processing method that is independent of the characteristics of both the domain and the speech recognizer. We divide the entire post-processing task into two steps: error detection and error correction. We consider the error detection step as a classification problem for which we apply the conditional random fields (CRFs) classifier. Furthermore, we apply transformation-based learning (TBL) to the error correction step. Our experimental results indicate that the proposed method corrects a speech recognizer's insertion, deletion, and substitution errors by 25.85%, 3.57%, and 7.42%, respectively.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.506-515
• /
• 2007

In this paper, we propose a Real-time Interactive Shadow Avatar(RISA) which can express facial emotions changing as response of user's gestures. The avatar's shape is a virtual Shadow constructed from the real-time sampled picture of user's shape. Several predefined facial animations overlap on the face area of the virtual Shadow, according to the types of hand gestures. We use the background subtraction method to separate the virtual Shadow, and a simplified region-based tracking method is adopted for tracking hand positions and detecting hand gestures. In order to express smooth change of emotions, we use a refined morphing method which uses many more frames in contrast with traditional dynamic emoticons. RISA can be directly applied to the area of interface media arts and we expect the detecting scheme of RISA would be utilized as an alternative media interface for DMB and camera phones which need simple input devices, in the near future.