• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.4
• /
• pp.41-52
• /
• 1990

This research has been performed in order to investigate the effect of prior deformation on the Ms temperature and reversed As of Fe-Ni alloy. The Ms temperature rose with increment of strain to 30% but lowered over 50%. It can be analysed that martensitic transformation was promoted by partial dislocation in low strain, but suppressed by dislocation cell structures in high strain. The As temperature was substantially increased with higher deformation to 20% but slowly above 50%. It may be caused that as the transition bands formed by deformation constrained shear strain, therefore austenitic transformation was hindered.

• Journal of the KSME
• /
• v.22 no.3
• /
• pp.184-190
• /
• 1982

어쿠우스틱 에밋션(AE)법에 의한 마찰용접강색도의 공정중 해석에 관한 실험적 연구에서의 탐 색적 연구결과는 다음과 같은 예비적 결론으로 나타내진다. 1) 철금속의 만족한 마찰동정을 달성할 때는 두개의 AE 돌출이 나타난다. 그 하나는 A역인 용 접사이클 중에 일어나는 것이며, B역인 또 다른 하나는 용접종료후 2, 3초 지나서 시작되는 냉 각중의 돌출이다. 최초의 돌출은 주로 재료의 소성변형에 기인하며, 두 번 째 AE 방출은 일반 적으로 크기가 더 크며 냉각중의 마르텐사이트 변태의 결과라고 해석된다. 2) AE의 초량과 강의 마찰용접강도 사이에는 일정한 상관관계가 존재한다고 생각된다. 실험적 오차를 더욱 감소시킨다면 정량관계가 수립될 수 있을 것이다. 3) 트랜스듀서와 기타 부품의 적절한 선택에 의해 철금속의 마찰용접품질(강도)을 공정중에 탐 색하기 위한, AE 법에 의한 공정중 용접강도 해석 시스템의 개발 가능성이 있다.

• Journal of Korea Foundry Society
• /
• v.28 no.1
• /
• pp.37-40
• /
• 2008

본 연구는 ADI의 기계적 성질을 개선하고자 오스테나이트화 과정에서 초기 변태온도를 $900^{\circ}C$ (${\gamma}$ 구역)에서 시작하여 $800^{\circ}C$까지(${\alpha}+{\gamma}$ 구역) 일정한 냉각제어에 의해 오스템퍼링을 한다. 여기서 Full ADI에서 생성되는 고탄소 오스테나이트 조직을 저탄소 오스테나이트로 유도하고 미세한 침상의 Full ADI조직을 연성이 높은 조대한 아공석 페라이트 조직이 생성되도록 하여 Semi ADI를 만든다. Full ADI와 Semi ADI의 기계적 성질 및 피로강도를 연구한 결과 Full ADI와 Semi ADI의 정적강도는 유사하지만, 피로강도는 Semi ADI의 기지조직의 변화에 기인하여 Full ADI보다 피로강도가 높게 나타났다. 이러한 현상은 Semi ADI의 조대한 페라이트가 균열개구 저항력이 낮아 초기에는 쉽게 개구되지만, 균열개구와 동시에 균열선단에서 큰 소성역이 발생되어 균열성장이 지연하는 효과로 판단된다.

• Journal of Surface Science and Engineering
• /
• v.37 no.5
• /
• pp.263-272
• /
• 2004

High strength steels such as transformation induced plastic steel, dual phase and solid solution Hardening have been developed and continuously improved due to the intensified needs in the automotive industry. But silicon and manganese in transformation induced plastic steels were known to exhibit harmful effects on galvannealing reaction by oxide film formed during heat treatment. Therefore, in this work, the applicability of Zn-Ni electrodeposition instead of hot dip galvannealed coating to transformation induced plastic steels was evaluated and optimum electroplating condition was investigated. Based on these investigations optimized electroplating conditions were proposed and Zn-Ni electrogalvanized steel sheet was produced by EGL (electrogalvanized line). Its perfomance properties for automotive steel was evaluated.

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.5
• /
• pp.530-537
• /
• 2008

Austenitic stainless steels(SUS 304, SUS 316), which are used for safety control valve of LNG carrier, are occasionally exposed in the cryogenic environment. In this regards, it is required to evaluate the mechanical characteristics under the low temperature environment. In this study, a series of uniaxial tensile test was carried out varying temperature for austenitic stainless steel. The phenomena of the strain-induced plasticity have been observed on the all temperature ranges. The critical value for threshold of 2nd hardening due to the phase transformation induced plasticity as well as the increase of hardening have been reported. The summarized experimental results would be used for the validation of numerical techniques applicable for the nonlinear hardening behavior of austenitic stainless steel under the cryogenic temperature environment.

• Electrical & Electronic Materials
• /
• v.3 no.3
• /
• pp.233-241
• /
• 1990

본 연구에서는 xPb(Zn$_{1}$3/Nb$_{2}$3/)O$_{3}$-yBa(Zn$_{1}$3/Nb$_{2}$3/)O$_{3}$-zPbTiO(0.50.leq.x.leq.0.60, 0.10.leq.y.leq.0.20, 0.20.leq.z.leq.0.40)세라믹을 1050.deg.C에서 2시간동안 유지시켜 일반소성법으로 제작하였다. 시편 제작시 조성은 조성변태 상경계부근을 선택하였으며 Ba(Zn$_{1}$3/ Nb$_{2}$3/)O$_{3}$ 고용량에 따른 purochlore상의 억제 및 그 영향을 조사하고 구조적, 유전적 및 압전적 특성을 측정하였다. X-선 회절분석 및 미세구조의 관찰 결과, Ba(Zn$_{1}$3/Nb$_{2}$3/)O$_{3}$의 고용량에 따라 pyrochlore상 및 미반응 물질등은 억제되어 0.20mol 고용된 시편에서는 균질한 perovskite상이 형성되었다. Ba(Zn$_{1}$3/Nb$_{2}$3/)O$_{3}$의 고용량이 증가함에 따라 유전상수는 증가하여 0.50PZN-0.20BZN-0.30PT시편의 경우 6880.9의 높은 값을 나타내었으며 정전용량의 온도계수는 감소하여 0.383[%/.deg.C]의 양호한 값을 나타내었다. 큐리온도는 PbTiO$_{3}$의 고용량이 0.20mol에서 0.40mol로 증가함에 따라 30.deg.C에서 170.deg.C로 증가하였다. 전기기계 결합계수 (K$_{p}$), 기계적 품질계수(Qm) 및 압전전하 계수 (d$_{33}$)는 조성변태 상경계 부근의 조성에서 크게 나타났으며 0.60PZN-0.15BZN-0.25PT 시편의 경우 각각 58.5%, 120.5, 150x$10^{-12}$[C/N]의 값을 나타내었다.다.다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.211-214
• /
• 2004

In the present study, the effect of SIDT (Strain Induced Dynamic Transformation) on the microstructure of medium carbon steels was investigated to develop spheroidized annealing-free steel wire rods. When $0.45\%C$ steels were hot-deformed under the conditions of heavy reduction at low temperatures, a microstructure quite different from conventional ferrite-pearlite structure was obtained. It was considered that this ferrite-cementite microstructure was obtained because very small retained austenite grains existing between fine SIDT ferrites prefer to transform to cementite and ferrite instead of pearlite during cooling. Through the present study, $0.45\%C$ steels containing ferrite-cementite (FC) structure instead of ferrite-pearlite structure was obtained in as-rolled state by introducing SIDT. The specimen containing the FC structure was much softer than that containing conventional ferrite-pearlite structure. Therefore, it is concluded that deforming medium carbon steels under the conditions of SIDT is a very powerful method to obtain soft steel wire rods which could be cold-forged without softening heat-treatment

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.161-176
• /
• 1993

For the purpose of assessing structural integrity at a level of complexity and accuracy appropriate for the situation, integrity assessment methods are formulated with the following methods. One is three-tier assessment method of the revised BSI PD 6493 which considers stable crack growth effect, the others are limit load analysis which estimates the plastic collapse load and stability assessment method which considers stable crack growth of ductile material exactly using J-integral and tearing modulus. Besides, integrity assessments for center cracked panel(CCP) specimen and the circumferential through-cracked pipe are carried out and reliability analysis is accomplished by the first order reliability method which is one of the conventional reliability methods. Also the accuracy of the present method is verified by Monte Carlo method.

• Applied Microscopy
• /
• v.32 no.4
• /
• pp.303-310
• /
• 2002

Spermatogenesis and sperm ultrastructure are investigated by means of light and transmission electron microscopy in the equilateral venus, Gomphina veneriformis which is dominant bivalve in the east coast of Korea. In the active spermatogenic season, testis consists of numerous spermatogenic follicles which is contains germ cells in the different developmental stage. The spermatogonia attached to spermatogenic follicle wall and has a large nucleus with electron-dense nucleolus. The spermatocytes are characterized by appearance of synaptonemal complex and well-developed Golgi complex. Nucleus of spermatid consists of numerous heterogeneous granules with high electron density. Karyoplasmic condensation, acrosome and flagellum formations are observed during spermiogenesis. Testicular matured sperms of sperm bundle consists of head, midpiece and tail. The head is about $8.5{\mu}m$ long and comprises a long nucleus and a bullet-like acrosome ($8.5{\mu}m$ in length). Acrosomal rod of microfilaments is observed in the lumen between nucleus and acrosome. The midpiece has four mitochondria. And tail has the typical '9+2' microtubule system.

• Composites Research
• /
• v.17 no.5
• /
• pp.54-60
• /
• 2004

A new three-dimensional model for predicting the relationship between the prestrain of the composite and the amount of phase transformation of shape memory alloy inducing shape memory effect has been proposed by using Eshelby's equivalent inclusion method with Mori-Tanaka's mean field theory. The model composite is aluminum matrix reinforced with short TiNi fiber shape memory alloy, where the matrix is work-hardening material of power-law type. The analytical results predicted by the current model show that most of the prestrain is induced by the plastic deformation of the matrix, except the small prestrain region. The strengthening mechanism of the composite by the shape memory effect should be explained by excluding its increase of yield stress due to the work-hardening effect of the matrix.